Top Engine Mount Torque Specs Reviews

45L PCC MOTOR Lifan 125cc Motor Dirt Bike Engine Basic 125M-B EN18-BASIC

  • Top Engine Mount : 92mm Bottom Engine Mount: 79mm Bolt to Bolt :152mm(6").
  • Bore x Stroke: 54mm x 54mm, this is a 'square' engine for best balance between power and torque.
  • Gears: 4-speed, manual clutch, All new 4 up System..
  • Buyer will receive Lifan 125CC Motor, Intake manifold, intake gaskets, Shifter, Kick Starter and Spark Plug..
Check Stock

For Chevrolet Motor Engine mount combo SBC Steel Motor Mounts

  • This Motor Engine mount fit for small and large Chevy V8 engines.
  • Replaces the existing upper rubber mount, to control excessive engine movement, which may cause torque loss and connecting rod constraints. And designed to be used with existing frame mounts from the 60s to 70s..
  • High-quality steel structure prevents distortion during acceleration.
  • Used in many types of OEM and fabricated chassis combinations.The "span" they are fixed on the frame support is 2.5 inches inside width. Most common in '58 -'72 small block applications..
  • Package included 2-piece solid steel engine bracket. Zinc-plated, anti-corrosion, long service life.
Check Stock

BILT HARD 301cc 10HP Gas Powered Engine, Horizontal 4 Stroke OHV Gas Motor, Shaft 1" Diameter, 3.48" Length, 1/4" Keyway, Replacement for Go Cart, Compressor, Log Splitter, Pressure Washer

  • OUR MOST POPULAR 7HP GAS POWERED ENGINE- 7HP OHV 4-Stroke Recoil Starting Gas Engine is designed for all DIY or Professional applications. Capable of delivering Powerful Torque & high RPM Speeds. Built to meet & exceed industrial grade quality standards & provide dependable performance. Manufactured to OSHA/ISO Regulations, EPA3 LCRPS.2121GC-010) / CARB(U-U-169-0418) Certified & Approved, making this a solid choice for the everyday Hard Working American!.
  • GEARHEAD SPECS - Our 7HP 209cc Horizontal Cylinder 4 Stroke OHV Recoil Starting Gas Engine has a Max Output Power/Speed of: 4.3kW/3600RPMs & 8.85Ft-Lbs/12.4Nm of Torque @2500RPMs. Counterclockwise Rotating PTO Ball Bearing Support Shaft Dia. of: 3/4" x 2.43”, 3/16" Straight Keyway & 5/16”-24 UNF End Tapered. Compression Ratio of: 8.2:1, Bore x Stroke of: 74.5mm x 48mm. Valve Clearance (Cold) Intake: 0.05-0.10mm & Exhaust: 0.05-0.10mm. Universal 4 Bolt Mounting Pattern: 6.38"/162m x 3.17"/80.5mm..
  • SUPERIOR PRODUCT INTEGRITY - The engine is designed to ensure the operator's safety.
  • Always operate the machine according to directions in the user manual, always wear th....
Check Stock

AlphaWorks Gas Engine 7HP Motor Horizontal 4 Stroke OHV Recoil Start 3600RPM 8.85Ft-Lbs/12Nm Torque 3/4\ x2.43” Shaft 3/16\ Keyway 5/16”-24 UNF End Tapped Go Kart Log Splitter EPA/CARB Certified

  • OUR MOST POPULAR 7HP GAS POWERED ENGINE- 7HP OHV 4-Stroke Recoil Starting Gas Engine is designed for all DIY or Professional applications. Capable of delivering Powerful Torque & high RPM Speeds. Built to meet & exceed industrial grade quality standards & provide dependable performance. Manufactured to OSHA/ISO Regulations, EPA3 LCRPS.2121GC-010) / CARB(U-U-169-0418) Certified & Approved, making this a solid choice for the everyday Hard Working American!.
  • GEARHEAD SPECS - Our 7HP 209cc Horizontal Cylinder 4 Stroke OHV Recoil Starting Gas Engine has a Max Output Power/Speed of: 4.3kW/3600RPMs & 8.85Ft-Lbs/12.4Nm of Torque @2500RPMs. Counterclockwise Rotating PTO Ball Bearing Support Shaft Dia. of: 3/4" x 2.43”, 3/16" Straight Keyway & 5/16”-24 UNF End Tapered. Compression Ratio of: 8.2:1, Bore x Stroke of: 74.5mm x 48mm. Valve Clearance (Cold) Intake: 0.05-0.10mm & Exhaust: 0.05-0.10mm. Universal 4 Bolt Mounting Pattern: 6.38"/162m x 3.17"/80.5mm..
  • SUPERIOR PRODUCT INTEGRITY - The engine is designed to ensure the operator's safety.
  • Always operate the machine according to directions in the user manual, always wear the appropriate ANSI standard hand and eye protection (ENGINE OIL NOT INCLUDED, MUST ADD UPON UN-BOXING).
Check Stock

Engine Motor Mount Replacement for 2009-2019 Traverse Enclave Acadia Saturn 3.6L Automatic Transmission, Replace OE A5444 A5548HY A5549HY A5458HY

  • Reliable Direcly replacement - Engine Motor Mount and Automatic Transmission Mount have undergone extensive quality and safety performance testing, use the higher quality of raw materials to ensure the mount will meet or exceed your original mount's specifications.
  • Compatiblity-It will be only compatible with 2009-2019 Traverse Enclave Acadia Saturn 3.6L Automatic Transmission.
  • Engine Motor Mount and Automatic Transmission Mount Replace Part Number: A5548HY, A5549HY, A5458HY, A5444, 3208, 3209, 3191, 3141, 25840450, MTA71146, 2010-516498, CF5548HY, MK5548HY, 25840452, 2010-516499, 7201-1222, 25840451, MTA70712, CF5458HY, 25840458, CF5444, MTA70702, MTA34430, EM-4035, EM-4037, EM-4036, EM-3141.
  • Package Includes: A5549HY Front Motor Mount, A5548HY Rear Motor Mount, A5444 Rear Torque Strut Mount, A5458HY Transmission Mount.
  • 30-Day warranty, true worry-free shopping experience. If you have any problem, feel free to contact us.
Check Stock

Motovecor Go Kart Torque Converter for Predator 212 Clutch Set, Replaces Comet TAV2 3/4 Inch 30-75, Manco, 10t 40 or 41 Chain, 3/4' 218353A, (0.75' 10T 40/41)-Upgrade

  • Driver clutch bore: 3/4"(19mm),Driven unit: Overall Diameter 6" (5/8" driven pulley) ,Sprocket teeth: 10 teeth #40/41 chain. This is a complete kit that includes both drive and driven clutch pulleys, belt, aluminum engine mount plate, built in jackshaft with sprocket, all mounting hardware..
  • Made of high quality iron and aluminum material, which is sturdy, durable, maximum torque, wear-resisting and fast heat dissipation 30-75.
  • Unit replaces:Comet 218353A, 219552A, 219456A, 217610A, and 203814A TAV2 30-75.
  • Comet Torque Converter 30 Series small engine belt drive pulley clutch kit will help with more take off power, smoother acceleration, climbing ability, and top end speed by providing more torque in the low end and higher speeds in top end..
  • Comet Torque Converter kits are used in small vehicles, riding lawnmowers, small tractors, go karts, mini bikes, mini choppers, ATV, motorcycles, and waterski winches.
Check Stock

Evolution Gun Works EGW Sight Mount for The Docter/Fastfire/Venom/Viper - Kimber 1911 Fixed Sights

  • THIS MOUNT FITS - Kimber 1911's with Fixed Rear Sights.
  • Desert Eagle 1911C* (*This mount will require a decent amount of fitting....
  • MOUNTING HARDWARE - (2) 6-32 Button Head Screws.
Check Stock

A-Premium 3PCS Engine Motor Mount Compatible with Ford Focus 2005 2006 2007 (2.0L L4 Only) Automatic ‎Transsmission Mount A5312 A2939 A2986

  • 【Vehicle Fitment】Compatible with Ford 2005 2006 2007 Focus L4 2.0L Hatchback Sedan Wagon Engine Motor and Automatic Transmisison Mount.
  • 【Kit Part Included】1x Front Right Motor Mount Bushing only Part Number# A5312, 3103, EM3103--------------------------1x Rear Right Torque Strut Mount Part Number# A2939, 2939, EM2939------------------------------------1x Transmission Mount Part Number# A2986, 2986, EM2986.
  • 【Essential】Please Read Our Description Carefully and Enter your Model on the Page to Confirm Whether our Product is Suitable for your Vehicles.
  • 【Buy with Confidence】1 Year Unlimited-mileage Quality Guarantee---We extremely value your satisfaction and strive to provide you good shopping exprience. Any further question, please feel free to contact us at any time.
  • 【Brand】A-Premium use the highest quality available raw materials to produce a trusted engine motor and transmission mount.
Check Stock

NEW SOUTHWEST SPEED TUBULAR TRANSMISSION CROSSMEMBER AND POLYURETHANE MOUNT FOR 1955-1957 CHEVY WITH POWERGLIDE, TURBO TH 350, TH 400, 700R4, MUNCIE, SAGINAW, 3 & 4 SPEED, TRIM-TO-FIT TRANSMISSION MOUNT WITH HARDWARE, TRI-5, BEL AIR, 150, 210, NOMAD, SEDAN DELIVERY, DELRAY

  • ...fortunately, It Won't Work With Any Of The Convertible Frames That Have The X-Braced Frame, That Encases The Drive Shaft..
  • This Crossmember Will Also Work With GM Manual Transmissions, Including Later Model Muncie & Saginaw 3 & 4 Speed Manual Transmissions, And Allows The Use Of Bellhousings That Don't Have The Rear Engine Mounts On The Bottom Of The Bellhousing. This Is Extremely Helpful When You Are Trying To Install Newer Model Engine And Transmission Combinations In The 55-57 Chevy. This Crossmember Moves The Rear Engine/transmission Mounting Location From The Bottom Of The Bellhousing To The Tail Housing On The Transmission. | * This Transmission Crossmember Kit Includes The Polyurethane Transmission Mount, Which Offers Added Strength Without The Harshness Of A Solid Mount, Making It A Smart Upgrade Over Traditional Rubber Mounts. | * This Crossmember Is Not A Universal Fit Unit. | * This Is A Direct Bolt-In And Also Increases Exhaust Pipe Clearance In Critical Areas..
  • Kit Includes: Southwest Speed 1955-1957 Chevy Tri-5 Tubular Auto/Manual Transmission Crossmember (# 400-7084) | * Adjustable Mounting Brackets | * Made From Heavy Gauge Steel Tubing | * Includes All Hardware To Mount Crossmember | * Black Powder Coated To Resist Corrosion | * Southw....
Check Stock

Autobahn88 Engine Torque Damper Kit, compatible with Nissan Skyline GTR R33 R34 RB26DETT BCNR33 BNR34

  • Fitment compatible with Nissan Skyline GTR R33 R34 RB26DETT BCNR33 BNR34.
  • The Engine Damper mounts in between your vehicle's engine block and firewall to effectively control horsepower and torque. Keep your motor supported as you slam through those gears while adding a nice showpiece under the hood. Creates less stress to engine mounts, giving you more power to the wheel.
  • Reduce Engine damping and bumping. Increase Lifespan of your Engine Mount.
  • Made by aluminum. Includes all thick and strong mounting kit.
  • Direct Bolt On. No modification is required that can DIY in 30 mins.
Check Stock

ENA Engine Motor Mount Set of 4 Compatible with Toyota 2003 2004 2005 2006 2007 Corolla 1.8L Replacement for A4220 A4219 A4218 A4221

  • engine mounts undergo extensive lab and vehicle fitment testing. Highest quality materials are utilized along with stringent quality control standards to meet or exceed OE specifications.
  • The rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle's application requirements.
  • All parts are tested throughout the manufacturing process to ensure proper management of engine torque and dampening of excess noise and vibration.
  • Worn or broken engine mounts place added strain upon the transmission mount, which can lead to misalignment of the driveshaft which can cause the transmission mount and/or the universal joints to prematurely fail.
  • 5 Year Limited Warranty - Please use Amazon's Your Garage feature above to see if this part is compatible with your vehicle.
Check Stock

BILT HARD 420cc 15HP Gas Engine with Electric Start, Horizontal Shaft 4 Stroke OHV Gas Motor, Gas Powered Multi-Use Engine

  • POWERFUL ENGINE - Our 420cc displacement 4-stroke horizontal cylinder gas engine has a max torque of 19.56ft.lbs @2500RPM, max 3600 RPM speed, 15 maximum horsepower, 1.7 gal fuel tank. Built to meet & exceed industrial grade quality standards & provide dependable performance. The engine is shipped dry so make sure you add gasoline and engine oil correctly before starting (not included)..
  • SHAFT SPECS - 1 in Diameter, 3.48 in Length, end tapped with 3/8 in.-24 UNF.
  • Mounting pattern 7.7L x 4.06W-4.09W in. Durable design runs quiy and provides smooth operation.This engine spark plug system can take Torch: F6TC spark plugs, with a clearance of: 0.027-0.0.31 in. The engine runs on a minimum 87+ unleaded gasoline (10%003e ETHANOL recommended)..
  • SAFETY & WIDELY APPLICATIONS - Built-in Force Air-Cooled and Splash Lubrication System, keeping the motor cool during extended use of time and ensure the operator's safety. A low oil shutoff functionality turns the engine off to prevent serious damage or failure. It's the perfect replacement engine for a pressure washers, cement mixers, compressors, mowers, log splitters, vacuums, tillers, water pumps, chipper/shredders and blowers..
  • GREAT REPLACEMENT - Our 420cc 15HP Horizontal Engine is a great replacem....
Check Stock

DynoMax 39510 Stainless Steel Exhaust System

  • COMPATIBILITY -- Designed for Jeep Wrangler JK.
  • see product information for compatibility and engine specs.
  • PERFORMANCE UPGRADE -- Enhance your vehicle’s exhaust system with this kit that can give a 14HP and 12-Lb. Ft. torque improvement.
  • COMPLETE SOLUTION -- Includes DynoMax Super Turbo muffler, 3-in. stainless-steel tips and clamps.
  • EASY TO INSTALL -- Direct-fit pre-assembled solution with welded hangers, pipes and clamps for easy installation that doesn’t require specialized fabrication and/or welding.
  • IMPROVED FLOW CAPACITY -- Stainless-steel tubing with mandrel bends improves flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power.
Check Stock