Top Engine Mount Bushing Size Reviews

Kluson Revolution G Style 3x3 Tuning Keys, Plastic Buttons

  • Kluson Revolution 19:1 'Gibson' mount with pearloid buttons, Vintage style KEDP-3801C.
  • Drop-in upgrade for instruments with Gibson style 2 hole mount and modern 25/64" or 10 mm) peghead hole. These normally use a screw in hex head bushing rather than a press in bushing..
  • Introducing the NEW Kluson Revolution G-mount 19:1 high ratio tuning machine. Kluson has truly introduced a game changer with the traditional footprint and newly designed sealed die-cast housing. These state of the art tuners are designed to directly retrofit tuners with a screw-in hex head bushing, traditional Kluson two-screw mounting pattern and modern 25/64" peghole. The vintage outline, pearloid plastic keystone button and pin-stripes pay tribute to Kluson heritage while the brand new.
  • SportHiTech are authorized Kluson dealers, and all products are factory-fresh and carry full manufacturer warranty, and are shipped in original retail packaging..
Check Stock

Kluson Revolution 3X3 Locking Tuners, Keystone Buttons - NICKEL

  • Kluson Revolution 19:1 'Gibson' mount Locking tuners in Nickel with Pearloid Keystone buttons, Vintage style KEDPL-3801N.
  • Drop-in upgrade for instruments with Gibson style 2 hole mount and modern 25/64" or 10 mm) peghead hole. These normally use a screw in hex head bushing rather than a press in bushing..
  • Introducing the NEW Kluson Revolution G-mount 19:1 high ratio tuning machine. Kluson has truly introduced a game changer with the traditional footprint and newly designed sealed die-cast housing. These state of the art tuners are designed to directly retrofit tuners with a screw-in hex head bushing, traditional Kluson two-screw mounting pattern and modern 25/64" peghole. The vintage outline, pearloid keystone button and pin-stripes pay tribute to Kluson heritage while adding a rear knob locking.
  • SportHiTech are authorized Kluson dealers, and all products are factory-fresh and carry full manufacturer warranty, and are shipped in original retail packaging..
Check Stock

Tuner - Kluson, Revolution G Mount, Pearloid Button, 3/side, Color: Nickel

  • Kluson Revolution 19:1 'Gibson' mount with pearloid buttons, Vintage style KEDP-3801N.
  • Drop-in upgrade for instruments with Gibson style 2 hole mount and modern 25/64" or 10 mm) peghead hole. These normally use a screw in hex head bushing rather than a press in bushing..
  • Introducing the NEW Kluson Revolution G-mount 19:1 high ratio tuning machine. Kluson has truly introduced a game changer with the traditional footprint and newly designed sealed die-cast housing. These state of the art tuners are designed to directly retrofit tuners with a screw-in hex head bushing, traditional Kluson two-screw mounting pattern and modern 25/64" peghole. The vintage outline, pearloid plastic keystone button and pin-stripes pay tribute to Kluson heritage while the brand new.
  • SportHiTech are authorized Kluson dealers, and all products are factory-fresh and carry full manufacturer warranty, and are shipped in original retail packaging..
Check Stock

Kluson Revolution Tuners 3x3 No Collar Locking Pearloid button Nickel KEDPNCL3-N

  • Kluson Revolution 19:1 'Gibson' mount with pearloid buttons, Locking Vintage style Nickel KEDPNCL3-N.
  • For the first time, a locking drop-in upgrade for instruments with Gibson style 2 hole mount and vintage (11/32" or 8.7mm) peghead hole. These normally use a press-in bushing rather than a screw in bushing..
  • Introducing the NEW Kluson Revolution G-mount 19:1 high ratio tuning machine. Kluson has truly introduced a game changer with the traditional footprint and newly designed sealed die-cast housing. These state of the art tuners are designed to directly retrofit vintage tuners with a push-in bushing, traditional Kluson two-screw mounting pattern and vintage 11/32 inch peghole. The vintage outline, pearloid plastic keystone button and pin-stripes pay tribute to Kluson heritage while the brand new.
  • SportHiTech are authorized Kluson dealers, and all products are factory-fresh and carry full manufacturer warranty, and are shipped in original retail packaging..
Check Stock

Kluson Revolution Tuners 3x3 No Collar Locking Pearloid button Gold KEDPNCL3-G

  • Kluson Revolution 19:1 'Gibson' mount with pearloid buttons, Locking Vintage style Gold KEDPNCL3-G.
  • For the first time, a locking drop-in upgrade for instruments with Gibson style 2 hole mount and vintage (11/32" or 8.7mm) peghead hole. These normally use a press-in bushing rather than a screw in bushing..
  • Introducing the NEW Kluson Revolution G-mount 19:1 high ratio tuning machine. Kluson has truly introduced a game changer with the traditional footprint and newly designed sealed die-cast housing. These state of the art tuners are designed to directly retrofit vintage tuners with a push-in bushing, traditional Kluson two-screw mounting pattern and vintage 11/32 inch peghole. The vintage outline, pearloid plastic keystone button and pin-stripes pay tribute to Kluson heritage while the brand new.
  • SportHiTech are authorized Kluson dealers, and all products are factory-fresh and carry full manufacturer warranty, and are shipped in original retail packaging..
Check Stock

Michigan Motorsports LS1 Rocker Arms with upgraded Bronze Bushing Trunion Kit Includes LS1 Rocker Arm Support Pedestal Stands Pair 4.8 5.3 5.7 6.0 LS1 LS2

  • LS Rocker Arms with Bronze Bushing Style Bearing Trunions Professionally Installed includes LS1 LS2 LS3 LQ9 LQ4 Rocker Arm Support Pedestal Stands.
  • Included: 16 New LS Rocker Arms with Bushing Style Bearing Trunions Professionally Installed and 16 Alen Head Bolts and Pair of Rocker Arm Support Pedestal Stands ..
  • Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with upgraded Trunion Kit is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo. LS Rocker Arms feature our BUSHING TRUNNION KITS. The Bushing bearing operate smoother and can operate at a higher RPM than even the caged bearing style upgrade..
  • The bushing design provides superior lubrication to the trunnion while also providing maximum load capability. Our innovative design prevents premature failures caused by the weak O.E. or replacement needle bearings, eliminating the possibility of debris from a bearing failure that can cause severe engine damage. Our special C932 bushing material is bathed in oil via grooves at 2 different locations on the trunnion..
  • These channels constantly feed oil to the bushing surface ensuring proper lubrication. The greater sur....
Check Stock

Compatible Criticare CSI 975PD-10 Spo2 Sensor Probe Reusable Pediatric Soft 9.8 ft 6 Pins Connector Accurate Measurement Fast Responses.

  • Color : Black , Product Name； Cable Snap Bushing.
  • Each Size： 28 x 10mm/ 1.1" x 0.4"(D*H).
  • Net Weight :93g, Package Content : 40 x Cable Snap Bushing.
  • Material : Plastic , Mount Dia :25mm/ 1".
Check Stock

LS Conversion Engine Swap Mounts - Endxedo Adjustable Swap Motor Conversion Bracket for 1973-1998 Square Body for OBS Chevy GMC Truck 1988-1998 LS1 2WD Small Block LS Swap

  • LS Engine Swap Mount Fitment - LS Series Engines: ALL Chevrolet LS Series Engines:LS1, LS2, LS3, LS6, LS7, LS9, GM 4.8L 5.3L 5.7L 6.0L 6.2L(1997-2014),And 4.8L,5.3L,6.0L,6.2L (1999-2013) Vortec Truck Engines. Also Fits LSX LM7 LR4 LQ4 LQ9 L33 LH6 L92 L76 L99 L96 L82 L83 L84 L86 L87..
  • Compatible with - 1973-1987 Chevrolet / GMC 2WD, 4WD, Full Size C/K Trucks, Suburban, K5 Blazer, Jimmy, Sierra, Scottsdale, Silverado, Cheyenne, C10, C20, C30, K10, K20, K30. And 1988-1998 “OBS” Chevy / GMC 2WD, 4WD, Full Size C/K Series Trucks & SUVS. Suburban, Tahoe, Full Size 2 door Blazer, Yukon, Silverado, Sierra, C1500, C2500, C3500, K1500, K2500, K3500..
  • High Quality Materials - The heavy duty engine mount swap kit is made of premium High Carbon cold rolled steel with high strength and long durability. The surface is painted to prevent rust, and the quality is strictly controlled..
  • Installtion - There is slotted for adjustment with engine placement in the engine compartment. It can move the engine from the original bell housing position up to 1/2 inches forward, and up to 1 inch rearward to help you install motor correctly,very e....
Check Stock

URO Parts 11527505302 Fan Clutch

  • Automatically controls cooling fan airflow through radiator and engine compartment.
  • Easy bolt-on installation instantly restores proper cooling fan performance.
  • Manufactured to OE fan clutch dimensions for proper clearances and fan alignment.
  • High-quality alloy metal construction withstands brutal engine heat and vibration.
  • Low-friction spindle bearing or bushing minimizes fan blade runout.
Check Stock

24pcs 9 Pins Compatible Masimo Disposable Neonatal Adult Spo2 Sensor for Masimo LNCS Neo 1862 Probe Adhesive Tape Sensor 9 Pins 3.2 ft Connector-Pronto-7, Rad-5, Rad-57, Rad-8, Rad-87, Radical-7

  • Color : Black , Product Name； Cable Snap Bushing.
  • Each Size： 28 x 10mm/ 1.1" x 0.4"(D*H).
  • Net Weight :93g, Package Content : 40 x Cable Snap Bushing.
  • Material : Plastic , Mount Dia :25mm/ 1".
Check Stock

[New Generation] Highway Pegs Footpegs Foot Rest Fit for Touring Street Glide Road Glide Road King Electra Glide with 1.25 inch Engine Guard 1 1/4 Highway Bar (Black)

  • [Material]:Made of heavy duty billet aluminum,strong and durable,and prime quality rubber not easy to came off.
  • [New Generation]:①New generation mount clamp ,firm grip the engine guard ②Oversized footpegs,provide more comfortable place for foot ③Short arm designed for many multi-fit applications especially for tall riders.
  • [Multi-Angles Adjustable]:The foot pedal and mount clamp is 360 adjustable,you can adjust comfortable angle and position.
  • [Fitment]:Fit for Harley Touring Road King Street Glide Road Glide Electra Glide with 1 1/4 inch highway bar.
  • Universally fit on 1 1/4" engine guards or tubing.
  • requires 1 1/4" of straight engine guard tube for clamp mounting (Please check your model and engine guard size,if your engine guard diatemeter is not 1 1/4 inch,they will not fit).
  • [Package]:1 pair highway pegs +Mount clamp kit(As the picture show).
Check Stock

CamDesign Monopod Handle Adapter Walking Stick Cane Monopod Head Attachment Converter Trekking Pole Handle Grip for Hiking Climbing Photography

  • Multi-Function Monopod Handle Adapter - A simple and easy way to turn your monopod into a walking stick/cane for hiking, climbing, or a short picture....
  • Ergonomic Grip - Conforms to the shape of your hand. Use the handle grip to lean on the hiking pole with your body weight, or use the lower ribbed....
  • Horizontal or Vertical Orientation - The handle can mount to a monopod horizontally or vertically in either of the two 3/8"-16 sockets..
  • 1/4"-20 Reducer Bushing - It can also mount to a monopod with a 1/4'"-20 thread via the included reducer bushing..
  • Made from durable environment-friendly plastic. Easy to carry around. Length: 5.08 in / 12.9 cm. Weight: 4 oz / 110 g..
Check Stock

Shindaiwa 78890-30000 Speed-Feed 400 Universal Bump Feed Trimmer Head

  • Please verifying your engine's model and part numbers to make sure that you receive the right parts and get your engine up and running smoothly..
  • Replaces Shindaiwa 78890-18000, 78890-18001, 78890-11000, 78890-30000, (For Echo, You may need to order Shield part number C550000032).
  • Fit most 78890-11000 Speed-Feed 375 Head,78890-30000 Speed-Feed 400 Head,78890-30000B Speed-Feed 400 Head.
  • The trimmer head is designed to quickly and efficiently cut through the grass..
  • Used on Shiandaiwa 22T, C230, C242, C2510, T195s, T220, T222,T230, T231, T230s, T242, C242, T242X, T2510, C2510, T2510X Trimmer,Thread LH trimmer head counterclockwise on to mounting stud or output shaft..
  • Mounting Studs Size:7mm x 10mm (LH) Mounting Stud.You will get: 1 trimmer head, 1 mounting stud, warranty is 3 month for any quality issue. Please identify the bushing and mounting stud combination needed for your model..
Check Stock