Top Energy Motherboard Reviews

AMASAFETY Mining Motherboard BTC- T37 with 8 Slots for 8 GPU, VGA Interface Low Power Consume for Mining Machine, RAM DDR3 (4GB) and CPU Included

  • ✔️No need to change the bios for motherboard specially designed for mining.
  • ✔️Motherboard contains CPU and 4GB RAM ..
  • ✔️The voltage stabilizing capacitor can provide a stable voltage for your power supply equipment..
  • ✔️It can ensure quiet performance, low power consumption, less heat generation, energy saving and safe use..
  • ✔️Expandable port: 8*PCIE 16X (PCIE x1 GEN2), 1-SATA3.0 + 1*SATA2.0 + 1*mSATA2.0 hard disk interface..
  • ✔️Memory slot, 8 graphics card connector..
Check Stock

CP3 RGB Computer Fans Addressable 120mm Case Cooling Fan Dual Lighting Loop Quiet Fan Compatible with AURA Sync, PWM PC Fan for Computer Case&Liquid Radiator Fan Adjustable Speed: 1000-1800RPM(3Packs)

  • 【Precise PWM Control】 3x 120mm full function PWM fans. The speed was adjusted by between 1000~1800±10% RPM, finding your balance between quiet operation and extreme cooling, that supports automatic motherboard speed control. Powerful airflow when required, virtually silent at idle. Save energy and prolong the lifespan of fans..
  • 【Dual Light Loop】The dual light ring equips 18 separately controlled Addressable RGB LEDs provide 12 lighting modes, 8 different colors and various of RGB light effect. The RGB Fans compatible with AURA Sync. The colorful light effect is controlled by motherboard automatically. We also provide additional controller if your motherboard doesn’t not support AURA, that allow you could create your own immersive lighting effects without technical obstacle..
  • 【Extreme Cooling Performance】CP3 PWM Fan optimized heat dissipation and hydraulic bearing ensured ultra quiet working environment . The blades was designed with a focus on minimum the noise level and delivering the superior airflow which up to 54.51CFM. The hydraulic bearing has an long lifespan up to 30,000 hrs. That helps to keep your computer’s system stable as rock in life time..
  • 【Ultra Quiet Design 】 Equipped with double-sided shock absorbing silicone rubbe....
Check Stock

Asiahorse FS-9002 Pro 20+6LED(in and Outside Light efect) ARGB White 120mm Pwm Case Fan with 5V PWM Motherboard Sync/Analog Controller (9 Pack)

  • 1. Out Frame- 20 lights, In Frame 6 lights, 26 lights in total by Design. With RGB three colors, you can freely combine the best light effect without any defects..
  • 2. Enhanced shaft and Thermostability oil Design -The axis silicon steel plate uses a high level of 12 pieces, which greatly enhances the stability and heat dissipation of the fan,Add High-And-low temperature antiwear oil to make the fan quieter and prevent the oil from melting under high temperature..
  • 3. Analog ARGB controller – low-profile pc case without RGB Cable motherboards. Choose from 4 Preset colors (red, green, blue, White, rainbow 1.0, and rainbow 2.0), Hundreds of LED modes and off mode (wave, full light, RGB spectrum, off, flow, ripple, pulse, and blink), and 4 LED speeds..
  • 4.Pwm Fan and Pwm Controller – After connecting to the PWM interface of the motherboard, The speed of the fan can be read through the motherboard software, Also the motherboard can automatically control the speed of the fan according to the temperature of the chassis,Efficient energy saving and environmental protection..
  • 5.New Soft Led Light Bar design-Can effectively protect the LED lamp from damage due to excessive tension when bending,The new LED light bar also increases the purity of the LED lamp..
Check Stock

ASIAHORSE FS-9002 Pro 20+6LED(in and Outside Light efect) ARGB Black 120mm Pwm Case Fan with 5V PWM Motherboard Sync/Analog Controller (5 Pack)

  • 1. Out Frame- 20 lights, In Frame 6 lights, 26 lights in total by Design. With RGB three colors, you can freely combine the best light effect without any defects..
  • 2. Enhanced shaft and Thermostability oil Design -The axis silicon steel plate uses a high level of 12 pieces, which greatly enhances the stability and heat dissipation of the fan,Add High-And-low temperature antiwear oil to make the fan quieter and prevent the oil from melting under high temperature..
  • 3. Analog ARGB controller - low-profile pc case without RGB Cable motherboards. Choose from 4 Preset colors (red, green, blue, White, rainbow 1.0, and rainbow 2.0), Hundreds of LED modes and off mode (wave, full light, RGB spectrum, off, flow, ripple, pulse, and blink), and 4 LED speeds..
  • 4.Pwm Fan and Pwm Controller - After connecting to the PWM interface of the motherboard, The speed of the fan can be read through the motherboard software, Also the motherboard can automatically control the speed of the fan according to the temperature of the chassis,Efficient energy saving and environmental protection..
  • 5.New Soft Led Light Bar design-Can effectively protect the LED lamp from damage due to excessive tension when bending,The new LED light bar also increases the purity of the LED lamp..
Check Stock

Csdtylh 320Pcs M3 Motherboard Standoffs&Screws&Nuts Kit Hex Male-Female Brass Spacer Standoffs Laptop Screws for DIY Computer Build Electronic Projects Raspberry Pi Circuit Board etc.

  • 【HIGH QUALITY】Packaged included 320pcs M3 motherboard standoffs and screws. The M3 standoff kit is very good value, which has a wide selection of standoffs and connectors.The M3 laptop screws kit has nice brass finish with quality threads.The motherboard standoffs fit nicely, thread cleanly and the variety in this m3 standoff kit is more than enough for all of the components in your DIY build..
  • 【GOOD ASSORTMENT】The M3 standoff kit is a very nice assortment of brass standoffs and all neatly organized in a compartment box. All the threads in the M3 computer screws kit are correctly sized, clean, and burr free.The m3 standoff kit box holding all the motherboard screws pieces is a good bonus to keep all motherboard standoffs organized in their own compartment..
  • 【EASY TO USE】The M3 standoff kit is a great kit with a lot of options. The M3 standoff kit are simple to work with, yet usable. The M3 motherboard standoffs and screws kit is easy to adjust the selected step or rise. The motherboard standoffs are easy to install and durable to use, too..
  • 【MUTIPURPOSE】 The motherboard standoffs kits are versatile. If you are a DIY computer builder, a little M3 standoff kit box of these motherboard standoffs and screws is essential. The motherboard scre....
Check Stock

MLLIQUEA 8 GPU Mining Rig Frame Case, Cryptocurrency Mining Machine System & Platform, Barebone Motherboard for ETH with 6 Cooling Fans, Miner Frame Case with SSD, RAM(Without PSU/GPU)

  • 8 GPU Ports - The mining machine system comes with 8 GPU interfaces, and the GPU interface spacing is about 55mm. 8 GPUs can be installed on the motherboard at the same time. The actual work done for you is lasting and rewarding. Small size, more suitable for mining factories. We can provide 24 hours technical support and no reason to return the product..
  • Upgrade Material - Our mining GPU frame case is made of high-quality steel, which is sturdy and durable, and can be reused. Six cooling fans, fast heat dissipation to ensure your normal use. Can fully protect your GPU and electronic equipment from damage and saves your use cost. Excellent equipment design to improve GPU performance. It is recommended that you buy MLLIQUEA 2000W power supply, which is sold in our store. Suitable for this case, more efficient mining..
  • Eth Mining Rig - Including: motherboard, Intel CPU (with CPU radiating plate*1), 128GB SSD, 4G RAM, 4500 rpm cooling fan * 6 , 6 PIN cable to (6 + 2) Pin * 8pcs(male to male), screws ​​package. There are two power connection methods: the built-in power supply requires you to purchase additional female to male cables, and the external power supply can directly use the male to male cables we give away. For detailed wiring, please ref....
Check Stock

SoundOriginal PC Motherboard Internal Speaker BIOS Alarm Buzzer (3pcs/Pack)

  • Motherboard speaker PC(Computer) Motherboard internal speaker.
  • System speaker Internal PC motherboard speaker used to hear post code beeps.
  • Piezo speaker, Aprox 3 inch long cable, reduces PC wiring clutter.
  • Bios speaker, Plugs onto the Speaker header connection on the motherboard.
  • 3pcs Motherboard Speaker Buzzer Mainboard Computer PC BIOS Beep Code.
Check Stock

Thermaltake Toughpower PF1 ARGB 1200W 80+ Platinum 16.8 Million Colors 18 Addressable LEDs 5V Motherboard Sync/Analog Controlled SLI Full Modular Power Supply PS-TPD-1200F3FAPU-1

  • [2-Way RGB control] - Control light via "color" "Mode" Button (7 light modes/8 Colors) or via 5V ARGB Sync motherboard.
  • [15 light modes via color mode button] - Wave/ spiral/ flow/ heartbeat/ ripple/ full lighted (Red, orange, yellow, green, blue, purple, pink, and white)/ spectrum mode/ light off.
  • [Sync with motherboard RGB software] - controlling lights with as US aura Sync, Gigabyte RGB FUSION, MSI Mystic Light Sync and ASROCK polychrome through motherboards that have a 5V addressable RGB header.
  • [Ring Duo 140mm fan] - 16.8 million color 18 addressable LEDs Dual lighting Zones self-lubricated hydraulic Bearing pwn fan for maximizing airflow while minimizing noise.
  • [Ultra quiet smart zero fan] - fan works only when PSU working load goes over 40%. a switch At the back of the PSU can be turned off to have the fan spun constantly.
  • [Zero cable platform] - daughterboards are directly soldered to the Motherboard for better heat dissipation and impressive output power quality.
  • [Japanese capacitors] - 100% High quality 105°C (221°F) Japanese capacitors offer the highest stability, durability, and reliability.
  • [80+ platinum and Intel C6/C7 States ready] - deliver up to 92% efficiency, PF1 ARGB Series optimized to work with all generations of Intel's processors t....
Check Stock

GELRHONR Right Angled USB 3.0 20-pin Male to Female Extension Adapter, Desktop Motherboard 90 Degree Angled USB 3.0 19-Pin Motherboard Internal Header-Black 2PCS

  • ✪USB 3.0 19/20pin Male to Female Extension Adapter:Two Angled Type: Down Angled and Up Angled.Suitable for Desktop motherboard.This motherboard header can solve the problem that the problem of accidentally breaking the motherboard pin by the 19P cable that is inserted in the motherboard..
  • ✪High Performance:Super-speed up to 5Gbps 10× faster than USB 2.0 Version.Support two-way data transmission at the same time. And lossless transmission..
  • ✪ Wide Compatibility:USB 3.0 19-Pin Motherboard Internal Header is standard USB 3.0 20 pin connector, so it will work with all of USB3.0 19 pin/20 pin ports on the motherboard such as Gigabyte..
  • ✪High quality:Made of high-quality ABS material and electronic components.Small size and light weight, the height is only 14mm.Strong and durable, long service life..
  • ✪Easy to install:Plug & play.But note the standard slot design,do not try to remove once plugged into motherboard.If you tried to remove it,removeed by professionals to prevent damage the motherboard..
Check Stock

Zyyini DDR3 Computer Motherboard,4 pin Power Desktop PC Motherboard Supports VGA+Network+USB,PC mainboard for Int Core I7 I5 I3, for Pentium

  • DDR3 memory type: The memory type of the desktop motherboard is DDR3, which has high working efficiency and fast data transmission speed, providing you with a super fast and smooth online gaming experience..
  • Improve game performance: The 4-pin power supply desktop computer motherboard adopts sophisticated production technology, supports 1155 interface processor, provides higher gaming performance, and is the perfect processor for gaming equipment..
  • High-quality materials: The motherboard is made of high-quality materials, the desktop motherboard is durable, sturdy and stable, and the computer motherboard provides the greatest storage flexibility and the fastest data speed..
  • Power outlet: The game motherboard has a 4pin power interface and a 24pin power interface, with excellent performance and long service life, and our motherboard can enhance the passive cooling capacity of key onboard components to allow your system to run reliably under heavy loads..
  • CPU support: The motherboard integrates sound card, graphics card, and network card, supports Core I7 I5 I3, can achieve quiet and efficient operation, and is your best choice for playing games and working..
Check Stock

CNmuca BTC S37 Miner Motherboard CPU Set 8 Video Card Slot DDR3 Memory VGA Interface Black

  • ※Intel LGA 1155 Socket: Supports Intel Core i3/i5/i7 2th or 3th generation, Xeon E3 v2, Pentium and Celeron series processors. (Eg Intel xeon E3-1280 V2, Core i7-3770K, Core i5-2500K, Core i3-3240, Pentium G620, Celeron G540, etc.).
  • ※Powerful slot: This B75 motherboard has a NGFF M.2 high-speed hard disk interface with a transmission speed of up to 32Gbps. In addition to PCIe X1 and PCIe X16 graphics card slots, this B75 motherboard also has a PCI expansion slot, which is an indispensable and important slot for installing independent sound cards and network cards..
  • ※Dual channel DDR3 memory: The maximum memory supports two 16G memory, memory type DDR3 1280/1333/1600/1866MHz desktop memory..
  • ※High-quality motherboard: The 6-layer PCB motherboard provides a faster operating speed, while being more robust and not easily damaged. All solid capatitor ensures sufficient power supply to ensure stable CPU operation..
  • ※Strong Extensibility: The expansion slot includes 1*PCIe X16 graphics card slot, 1*PCIe X1 slot, 1*PCI slot, 2*USB 2.0 slots, 2*USB 3.0 slots, 3*SATA 2.0 interfaces, 1*SATA 3.0 interface and 1*NGFF M.2 interface (SATA M.2)..
  • ※High-definition video output: Compatible with VGA+HDMI high-definition high-performance integrated display dual o....
Check Stock

Nest Warehouse 9Pin USB Header Splitter Male 1 to 4 Female Extension USB 2.0 Motherboard USB 2.0 Adapter Converter MB USB Adapter 9Pin Internal USB Hub Port Multiplier

  • This is a 9pin USB 2.0 header splitter for motherboard, as normally have 1 or 2 front USB connector interface, but this adapter can extension from....
  • Internal USB hub with wired belt shielding, this connection can ensure a stable connection, allow to add additional PC components to motherboard, and....
  • The nzxt usb 2.0 internal hub have a short circuit outlet design, can prevent your motherboard USB interface from short circuit..
  • USB hub for motherboard, as it can convert motherboard 1 USB 2.0 male to 4 female. With a 30cm USB head cable, it easy to place the board at a....
  • The internal USB 2.0 hub can self-stick with 3M firm adhesive, can be used as a fan splitter for motherboard, add cool led strip for your motherboard,....
Check Stock

Airgoo PWM ARGB Fan Hub, 8 Fan Ports with pwm Temperature Control sync with Motherboard, 8 Addressable RGB LED Ports for 5V 3-pin Aura SYNC, Gigabyte RGB Fusion, MSI Mystic Light Sync, Sata Powered

  • 【8 Channels Fan Hub】Powering up to 8 Fans (3-pin Non-PWM or 4-pin PWM), Occupying only One 4-pin Motherboard Fan Header, sync with Motherboard Fan Header, 8 channels support(F-1~F-8) and only 1 channel RPM detect support(F-1). Sata Powered, support connect more high performance fans, extended your motherboard fan headers. And Airgoo ARGB Fan Hub built-in fuses, keep your system safe..
  • 【PWM Temperature Control】Fan speed can be automatically adjusted by motherboard BIOS pwm temperature function. If 3-pin non-PWM fans are connected to this fan hub, this fan hub CANNOT give them extra PWM function. They will run at FULL SPEED. If 4-pin PWM fans are connected to this fan hub, DUTY RATIO of all PWM fans can be adjusted at the same time. That is, all PWM fans will run at the same DUTY RATIO. Only speed of Fan 1(F-1) can be identified by the system..
  • 【8 Channels ARGB Hub】8 channels argb hub, connect any 5V 3-pin (+5V, DATA, N/A, GND) addressable rgb fans or addressable rgb led strips you wish to control, just plug this ARGB Fan Hub into motherboard argb header via included extension cable, sync with motherboard 5V 3-pin ARGB headers. Sata Powered, support connect more argb lightings, extended your motherboard argb headers. And Airgoo ARGB Fan Hub b....
Check Stock