Top End Milling Machine Reviews

SpeTool 5PCS 12401 4 Flutes Carbide CNC End Mill, Square Nose 1/4 inch Shank, 2-1/2 inch Long Overall, Titian Coated for Metal Mill

Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 3/4 inch Cutting Length, 2-1/2 inch for Total Length.
The End Mill With Flat Top, 4-Flute, For Finishing, Material: HRC55 Carbide with TiAlN Coated.
For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc.
The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..

Check Stock

JIANXING 4mm 5mm 6mm Carbide Square End Mill Set,4 Flute Cutting Tools,HRC 55 Deg,Tialn Coating，Straight Shank Square Nose End Mills Cutter,CNC Router Bits,Widely Used in Alloy Steels/Hardened Steels(1 Set)

【Cnc 4-Flute End Mill 】Adopt Modern Grinding Machine Equipment For High-Precision Grinding. Resists Wear And Offers High Cutting Performance.
【Material】: Carbide With Tialn Coating For HRC 55 Deg, The Tialn Coating Has Stable Performance And Is Not Easy To Wear Under High Temperature Environment. It Has Higher Hardness And Wear Resistance And Excellent Cutting Performance.
【The 35 degree helix angle design】 Greatly Improves The Production Efficiency, Sharp And Durable, Convenient For Chip Removal.
【Applicable materials】 Include Ordinary Steel, Carbon Steel, Alloy Steel, Hardened Steel, Cast Iron, Etc. The End Milling Cutter Bit Is Suitable For Plane / Side Milling, U-Groove Milling And Other Additive Methods..
【Package Included】: 1set (4mm+5mm+6mm) Carbide End Mill.

Check Stock

SpeTool 4 Flutes Ball Nose End Mill Solid Carbide CNC Router Bits 1/4 Inch Shank with 3 Inch Long Spiral Milling Tool

Solid Carbide Ball Nose CNC Bit with 1/4inch Shank and 1/4inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length.
Round Top with 4-Flute, Material: Solid Carbide with TiAlN Coated.
For CNC, Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc.
The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..

Check Stock

Akozon 5pcs M3-M8 Pilot Slotting Counterbore Mould End Mill Cutter Solid Slot Countersink End Mill Drill Bit

【Main purpose】: Countersunk end mill is a specially manufactured tool, mainly used to cut holes that allow bolts or screw heads to be screwed into..
【High precision】: The cutting hole and bottom hole of this tool have high alignment accuracy. Because of its high production efficiency, it is often used in the machining industry..
【High-quality and durable】: The Pilot Counterbore End Mill Cutters is made of hard high-speed steel, with high toughness, wear resistance, and high hardness for high-speed cutting.
it is usually used for assembly on a milling machine..
【More time-saving】: Countersunk cutters reduce the time to change tools, improve the efficiency of machine actuator movement and save manufacturing time..
【Wide range of applications】: Counterbore bit set is suitable for milling of copper, aluminum, steel, cast iron, etc., and can be directly processed or finely processed to heat treatments..

Check Stock

Face End Mill, Mt3-Fmb22 Holder Extension 400R50-22 Face End Mill Cutter 10Pcs Apmt1604 CNC Carbide Inserts for Plate Cutting Heavy CNC Milling Cutting

HIGH-PRECISION MACHINING: Hardened high-precision shock resistance, good permeability, multiple impact resistance, good low temperature impact toughness, strong and durable, can increase the service life and shock resistance of the cutter head.
GOOD IMPACT RESISTANCE: Our end mills are ideal for heavy duty CNC milling, Model: 400R--Bore: 22--Number of Inserts: 4--Type of Insert: APMT1604--Number of Inserts: 10 Pieces.
MACHINING RANGE: This MT3-FMB22 holder has better cleanliness and more stable precision, can be used for sheet metal cutting, hardened inserts for steel.
EMBEDDED TOOL HOLDER: The lathe tool holder is embedded, which is easier to control than the flat-tail type tool holder, with high precision, and the threaded connection holes are connected more tightly, reducing machining errors.
WIDE RANGE OF APPLICATIONS: Lathe extension rods are the main accessories commonly used in milling CNC machine tools, fixture milling machines, horizontal boring machines, ordinary boring and milling machines, drilling machines, bench drills and small machine tools.

Check Stock

Mega Mini R8 Milling Machine, the only True Inch machine on the market, .50 inch-per-turn table feed screw, a powerful brushless 500W motor

X-Axis Power Feed: The X-Axis power table feed is made of sturdy aluminum material. It is also designed with a handle, buttons, and knobs for simple operation. Voltage: 110V, 60Hz. Revolution Speed: 0-200 RPM. High quality and efficiency to handle all your milling needs..
Long Service Life: The power feed for the milling machine features a smooth and strengthened polished surface, which is waterproof, dustproof, and oilproof. That ensures a long service life in harsh working conditions..
High Efficiency & Precision: The x-axis power feed is equipped with spiral bevel gears for rapid control. There are bearings to achieve high efficiency and precision as well..
Low Noise & Easy Operation: The milling machine power feed features 9 levels of moving speeds, set by the rotary knob on the side. Moreover, it makes little noise when used, an essential piece of equipment for every workshop..
Wide Compatibility: This milling table power feed fits multiple vertical knee-type mills with the same mounting pattern and a 5/8" diameter shaft on the end. Such as Bridgeport, Precision Matthews, Enco, Jet, Sharp, Acer, Webb, etc..

Check Stock

SpeTool 14411 Ball Nose Carbide End Mill CNC Cutter Router Bits Double Flutes Spiral Milling Tool 1/4 inch Shank with 3 inch Over Length

Solid Carbide Ball Nose Router Bit with 1/4inch Shank and 1/4inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length.
Round Top with 2-Flute, Material: HRC55 Carbide with TiAlN Coated.
For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc.
The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..

Check Stock

YG-1 P15202 Spade Drill Straight Shank Holder, Straight Flute, 0.318\ Shank Diameter, 31/32\-1-3/8\ Drill Insert Range

☞This product is the main accessory of coordinate boring machine, horizontal boring machine, ordinary boring and milling machine, boring and milling CNC machine tools. It can be used for boring, boring outer circle, boring end face, boring stepped hole, boring inner hole end face, cutting inner hole and ring groove on outer circle, etc..
☞Precise control and free adjustment: The scale of the dial is clear, and the circle is divided into 100 equal parts. The movement of each scale is 0.005mm, the diameter is 0.01mm, and the operation is simple..
☞Select material with high hardness. Using 40CrMo material, it has strong rigidity, special surface treatment, high hardness, good seismic performance, suitable for high speed, and guarantees the density of hole processing..
☞The boring range of the complete set of boring tools: 10-150mm, and the diameter of the boring tool bar is 50mm. Precision fine-tuning: 0.01mm (one revolution of 0.02mm), adjustable stroke 20mm. The boring bar easily and directly enters the boring head hole..
☞The refined boring bar is made of alloy steel, which has strength and toughness, good hardenability, and no obvious temper brittleness. After quenching and tempering, it has obvious impact resistance. The taper design of the b....

Check Stock

SpeTool 5Pcs 2-Flute Square Nose Carbide End Mill 1/8 Inch Router Bit with 1/8 inch Shank CNC Machine Tools, TiAlN Coated

ENDMILL SIZE. 1/8" shank, 1/8" cutting diameter, 1/2" cutting length, 1-1/2" over all length.
SPECIFICATION. Flat top, 2-flute, HRC55 with tialn coated, use 1/8" collet.
PREMIUM QUALITY. Made of high quality tungsten carbide, precision edge-grinding technology.
excellent cutting results and enhanced productivity.
WIDE APPLICATION. For cnc, engraving machine, carbon steel, mould steel, inconel, stainless steel, titanium alloy etc.
suitable for side milling, end milling, finish machining, etc..
PACKAGE INCLUDE. 5 pieces high quality end mill pack in a individual plastic box.

Check Stock

Milling Bronze Gear,Power Feed Bronze Gear Bridgeport for Bridgeport Milling Machine

【BASIC PARAMETERS】GPOAS X-Axis power feed is made of aluminuml.
Power Parameter:90Watt,110V input voltage,50/60Hz,single phase.
Rotate Speed:0-200 RPM.Max Torque:450in-lb.
Max return speed: 850mm/min.This power feed fits some milling machines like Bridgeport, Precision Matthews, Enco, Jet, Sharp, Acer, Webb, etc....
【PORTABLE AND EASY TO INSTALL】This power feed for milling machine is compact and portable.Weight: 3.75kg/8.27lbs, Size: 7*3.5*12.8 inch. And whether it is for a novice or a skilled operator, it is very easy to install this power feed according to the instruction and online video or by yourself.After-sales:You will get worry-free 18-month warranty and lifelong technical guidance..
【STABLE AND EFFICIENT】This power feed adopts Gleason Spiral Bevel Gear with advantages of stable transmission ratio,low transmission noise,high transmission efficiency and high bearing capacity.And when fast transmission, if the tool collides with the workpiece or reverses instantaneously, the special safety device protects the transmission plastic gear and electronic parts from damage..
【AUTOMATIC AND MANUAL CONTROL】You can set this power feed to work at automatic constant speed to free your hands or work by manually adjusting....

Check Stock

SpeTool 5PCS 2 Flutes Square Nose End Mill Set Power Milling Machine Carbide Upcut CNC Router Bits Tiain Coated, 1/4 inch Shank, 2 1/2 inches Long Overall

Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 3/4 inch Cutting Length, 2-1/2 inch for Total Length.
Flat Top with 2-Flute, Material: Solid Carbide with TiAlN Coated for HRC 55.
For CNC Machine.Cutting Steel, Metal, Inconel, Stainless Steel, Titanium Alloy etc.
The Endmill Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..

Check Stock

Micro 100 SFPM-050-10 Square End Mill - Upcut, 5 mm Cutter Dia, 16 mm LOC, 1 Fl, 5 mm Shank Dia, 50 mm OAL, Uncoated

END MILL CUTTER: Mill Cutter, usually used to be assembled on milling machine. Suitable for CNC data processing center, carved, high-speed machines..
WIDELY USE: Can milling of copper, aluminum, tool steel, cast iron, etc..
HIGH TOUGHNESS: High toughness, abrasion resistance, high-speed cutting for the high hardness..
EASY TO USE: Can processing directly or fine processing to the heat treatment mold..
SAVING TIME: Reducing the number of tool changes, improve machine actuator movement rhythm, save mold making time..

Check Stock

Kodiak Cutting Tools KCT133263 USA Made Ball Nose Premium Carbide End Mill, AlTiN Coated, 4 Flute, 1/8\ Shank, 1/2\ Length of Cut, 1-1/2\ Overall Length, 1/8\ Diameter

Solid Carbide Spiral Router Bit with 5/16 inch Shank and 5/16 inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length.
Round Top with 4-Flute, Material: Solid Carbide with TiAlN Coated for HRC 55.
For CNC Machine.Cutting Steel, Metal, Inconel, Stainless Steel, Titanium Alloy etc.
The Route Bit Suit for CNC Router and the Brand Plunge Router with 5/16" Collet.
End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..

Check Stock