Top End Mill Bit Reviews

EANOSIC Spiral Router Bits Up Down Compression Bit 1/4 inch Cutting Diameter with Nano Blue Coated, 1/4 inch Shank Solid Carbide CNC End Mill for Wood Carving Engraver Milling Cutters for Mills Machines

UP & DOWN cut spiral router bit with 1/4 inch shank and 1/4 inch cutting diameter, 1 inch cutting length, 2-1/2 inch for total length.
SOLID CARBIDE AND NANO BLUE COATED: The up and down cut spiral router bit is made of solid carbide. And Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality. Clean surface, neat, no glitches..
Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly upcut and downcut groove and slots, mortises, cycles and dados with clean edge and bottom, better than straight bits..
The CNC End Mill Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp. And also for carbon steel, soft alloy steel, tool steel, cast iron, aluminum alloy..
The router bit suit for CNC router and any plunge routers with 1/4" collet..

Check Stock

YG1 E5G97911 | 1/4x1/4x5/8x2-1/2 AluPwr 3FL HP Carbide Corner Radius End Mill

Corner radius end mills have cutting edges with rounded corners to reduce chipping and provide longer tool life.
Four flutes produce a better finish than fewer flutes.
Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures.
Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds.
Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling.

Check Stock

4Pcs Tapered Ball Nose End Mill 0.25MM-1MM with 0.5MM Tip Diameter CNC Router Bits Set 2D 3D Woodworking Tool 2 Flute CNC Router Bits

【High Quality】The end mills are made of ultra-fine tungsten carbide steel alloy, its nano black coating/titanium coating with high hardness and heat resistance..
【End Mill Bits Set】4Pc【End Mill Set】4Pcs ball nose bit 2-flute, Nano black coat and titanium coat CNC router bits, will satisfying your different needs.s ball nose bit 2-flute, Nano black coat and titanium coat CNC router bits, will satisfying your different needs..
【Parameter】Ball raidus 0.25mm, 0.5mm, 0.75mm, 0.1mm, flute length:15MM, overall length 1.5 inch, single side angle 5.12°..
【Wide Compatibility】Widely used in various materials including plastics, aluminum, circuit board, wood, as well as other precision parts processing,they are compatible with most desktop CNC machines..
【Wide Application】PCB, SMT, CNC, Mold, plastic fiber, carbon fiber, hard wood, printed circuit board, aluminum and other precision parts processing..

Check Stock

EANOSIC Upcut Spiral Router Bit 3-Flute with 1/2” Shank, Extra Long (4 inch), 1/2” Cutting Diameter, 2” Cutting Length, Carbide CNC Router Bits End Mill for Wood Mortises Carving Engraving

Up cut spiral router bit with 1/2 inch shank and 1/2 inch cutting diameter, 2 inch cutting length, 4 inch for total length.
PREMIUM QUALITY: The spiral upcut router bits Made of solid carbide (Tungsten steel), it is high-wearable and has a long life. You can decrease the times of changing cutters, save production time..
The CNC End Mill Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp. And also for carbon steel, soft alloy steel, tool steel, cast iron, aluminum alloy..
Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly upcut groove and slots, Mortises, Cycles and dados with clean edge and bottom, better than straight bits..
The router bit suit for CNC router and any plunge routers with 1/2" collet..

Check Stock

AUTOTOOLHOME 3/16' Carbide Square End Mill for Micro Grain Carbide Milling Cutter for Alloy Steel Hardened Steels 4 Flutes HRC50 (1, 3/16 in)

AUTOTOOLHOME 600 Nano carbide end mill tools excel at working carbon steels (~HB225), alloy steels (HB225~325), pre-hardened steels (up to HRC45), hardened Steels (HRC40~45), cast iron.
HIGH PERFORMANCE FOR HARD MATERIALS - Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance.
Carbide milling bits Diameter: 3/16'', Shank Diameter: 3/16'', Flute length: 5/8'', Overall Length: 2", 4 Flutes.
This 3/16 inch square drill bit,highly optimized carbide material and coating pairing means superior wear and chipping resistance in your cutting applications.
End Mill router bits are used for side milling, end milling, finish machining, etc..

Check Stock

AUTOTOOLHOME 3/8' Carbide Square End Mill for Micro Grain Carbide Milling Cutter for Alloy Steel Hardened Steels 4 Flutes HRC50 (1, 3/8 in)

AUTOTOOLHOME 600 Nano carbide end mill tools excel at working carbon steels (~HB225), alloy steels (HB225~325), pre-hardened steels (up to HRC45), hardened Steels (HRC40~45), cast iron.
Carbide milling bits Diameter: 3/8'', Shank Diameter: 3/8'', Flute length: 1'', Overall Length: 2-1/2", 4 Flutes.
This 1/4 inch square drill bit,highly optimized carbide material and coating pairing means superior wear and chipping resistance in your cutting applications.
End Mill spiral router bits are used for side milling, end milling, finish machining, etc..
Unequal flute spacing and irregular helix flutes ensures stable machining of difficult-to-cut materials and higher efficiency,Vibration absorption provides stability, high efficiency finishing and improved chip disposal.

Check Stock

Niagara Cutter C430R-0.375-D3-R030.0-Z4 C430R Carbide Radius End Mill TiAlN Finish 4 Flutes 3/8 Cutting Diameter 3/8 Shank Diameter 2-1/2 Overall Length 1

Corner radius end mills have cutting edges with rounded corners to reduce chipping and provide longer tool life.
Four flutes produce a better finish than fewer flutes.
Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures.
Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds.
Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling.

Check Stock

SpeTool CNC Router Bits Carving 8 Pcs Set for Wood Detail Profile V Groove Engraving Solid Carbide 1/4 Inch Shank

The Carving bits kits of Tapered Ball Nose, Spiral, Cone End Mill Cutter.
For CNC,Engraving machine.Carving Wood, plywood, MDF, plastics, acrylic, stainless steel, titanium alloy etc.
Long service life, Decreasing the times of changing cutters,Saving production time.
Include 3*carbide end mills ( 2 pc v-groove end mill, 1pcs tapered end mill ), 4*Spiral End Mill (3 pc up cut, 1 pc down cut), 1*ball end mill.
The Carbide End Mill Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.

Check Stock

End Mill Set Metric CNC Milling Cutter Union Butterfield Tungsten 4 Fultes accupro Carbide Rotary Bits Tool Straight Shank 2-12mm 8pcs

◆2-12mm End Mill Set: This end mill set includes 8 diameter sizes of 2mm, 3mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mm, satisfy your different needs..
◆End Milling Cutter Handle Design：Straight shank handle, rounded chamfer design for easy installation and improved work efficiency..
◆Excellent Carbide End Mill: Carbide end mills provide better rigidity and can be run faster. 4 flutes end mill produce a much finer finish than other flute tools, ideal for peripheral and finish milling..
◆Wide Application CNC End Mill：It can be used on many fields, such as metal processing, CNC machining and engineering using. Large chip flute design for smoother chip removal, making the workpiece smoother and brighter..
◆Package Included：8 x 4 Flutes End Mill Cutter.

Check Stock

SpeTool 4 Flutes Ball Nose End Mill Solid Carbide CNC Router Bits 1/4 Inch Shank with 3 Inch Long Spiral Milling Tool

Solid Carbide Ball Nose CNC Bit with 1/4inch Shank and 1/4inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length.
Round Top with 4-Flute, Material: Solid Carbide with TiAlN Coated.
For CNC, Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc.
The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..

Check Stock

5PCS R0.5-3mm Ball Nose Carbide End Mill Set CNC Cutter Router Bits 2 Flute Spiral Milling Tool End Mill Set Includes 5 Radius Sizes Of 0.5mm 1mm 1.5mm 2mm 3mm

Applicable Materials: ball mill bit usually used for steel（Carbon steel/Alloy steel/Hardened steel/Cast lron, etc.）.
Ball End Mill Specification -- Cutting Diameter: 1 - 6MM（1mm 2mm 3mm 4mm 6mm），Shank Diameter:4 - 6MM（4mm 4mm 4mm 4mm 6mm），Cutting Length:2 - 12MM（2mm 4mm 6mm 8mm 12mm），Overall Length:50MM.
Wide Compatibility: ball nose end mill set are compatible with most desktop CNC machines, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device..
High Quality:made from solid tungsten carbide (TC)，have a Titanium Nitride (TiN) surface to improve heat resistance and reduce wear..
Used it strictly for steel, it worked great for that, eats metal fast ，beautiful surface finish!Watch your stick out and travel speeds..

Check Stock

SpeTool 14411 Ball Nose Carbide End Mill CNC Cutter Router Bits Double Flutes Spiral Milling Tool 1/4 inch Shank with 3 inch Over Length

Solid Carbide Ball Nose Router Bit with 1/4inch Shank and 1/4inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length.
Round Top with 2-Flute, Material: HRC55 Carbide with TiAlN Coated.
For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc.
The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..

Check Stock

Akozon 5pcs M3-M8 Pilot Slotting Counterbore Mould End Mill Cutter Solid Slot Countersink End Mill Drill Bit

【Main purpose】: Countersunk end mill is a specially manufactured tool, mainly used to cut holes that allow bolts or screw heads to be screwed into..
【High precision】: The cutting hole and bottom hole of this tool have high alignment accuracy. Because of its high production efficiency, it is often used in the machining industry..
【High-quality and durable】: The Pilot Counterbore End Mill Cutters is made of hard high-speed steel, with high toughness, wear resistance, and high hardness for high-speed cutting.
it is usually used for assembly on a milling machine..
【More time-saving】: Countersunk cutters reduce the time to change tools, improve the efficiency of machine actuator movement and save manufacturing time..
【Wide range of applications】: Counterbore bit set is suitable for milling of copper, aluminum, steel, cast iron, etc., and can be directly processed or finely processed to heat treatments..

Check Stock