Top End Fittings For Insulators Reviews

Seismic Audio - SATRXL-F25White - 25 Foot White XLR Female to 1/4 Inch TRS Patch Cables- 25' Professional Audio Balanced XLR-F to 1/4\ Patch Cord

  • Metal 3 Pin XLR Female on one end | Metal 1/4" TRS with High Grade Fiberglass Insulators on the other end (male)..
  • White in Color | Heavy Duty Flexible Rubber Jacket.
Check Stock

Field Guardian Spring Gate Kit, 16-Feet,Silver

  • Includes two corner end screw-in ring insulators to be used with wood posts..
  • Great when used with underground cable PN 664102 to keep fence hot when the gate is open..
Check Stock

Cimeton 32Pcs Drip Irrigation Tubing Hole Punch & Fittings Kit, Including 2Pcs Drip Irrigation Pipe Hand Puncher 2-in-One Punch Tools with 30Pcs Drip Irrigation Barbed Plugs End Closure Plugs Fittings

  • ❀【Package Included】: Cimeton drip irrigation tubing punch and fittings kit includes 2pcs drip irrigation tube hand punch (1pc professional hole punch and 1pc 2-in-1 punch tool).
  • and 30pcs drip irrigation fittings: 20pcs straight barbed plugs and 10pcs figure 8 end closure plugs, 32pcs in total. This is a practical tool kit to meet your daily gardening and irrigation needs..
  • ❀【Long-Lasting】: Made of durable plastic, these punch tools and irrigation fittings are sturdy and safe, non-toxic, have well performance of water, UV and chemical resistance. And the hole punchers have been polished so it will not become dull, which ensure a longer service life..
  • ❀【Tube Hole Punchers】: Our irrigation tube punchers are designed to fit for drip tubing punch and 1/4" fitting insertion use, match with PE pipes with a diameter of 16/20/25mm. Punch hole size measures approx. 3mm. These tube hole punchers are mainly used to drill holes when installing drippers and micro sprinklers in PE pipe to ensure proper insertion of fittings, tubing and emitters for a tighter fit..
  • ❀【Irrigation Fittings】: Our straight barbed plugs are designed for quick connecting two side of 1/4" drip irrigation tubing or filling into a 1/2" drip irrigation pipe, and the....
Check Stock

Valterra Products Inc A04-3460BK Sewer Hose Carrier Adjustable

  • RV HOSE CARRIER: Fits most 3" drain hoses and fittings with the exception of one-piece 90-degree sewer fittings.
  • CONVENIENT INSTALLATION: End caps come assembled with fixed, pre-glued mounting brackets and includes self-tapping screws for easy installation.
  • VENTED END CAPS: End caps feature a vented design to prevent the buildup of moisture.
  • LOCKABLE DESIGN: End caps have a loop that allows the addition of a padlock for extra security.
  • IDEAL SIZE: Features an inside diameter of 4.45" for versatile storage options. Vented quarter-turn twist on cap with rubber strap.
Check Stock

Valterra A04-5094BK RV Adjustable EZ Hose Carrier with Lockable Door Cap, Black

  • RV HOSE CARRIER: Fits most 3" drain hoses and fittings with the exception of one-piece 90-degree sewer fittings.
  • CONVENIENT INSTALLATION: End caps come assembled with fixed, pre-glued mounting brackets and includes self-tapping screws for easy installation.
  • VENTED END CAPS: End caps feature a vented design to prevent the buildup of moisture.
  • LOCKABLE DESIGN: End caps have a loop that allows the addition of a padlock for extra security.
  • IDEAL SIZE: Features an inside diameter of 4.45" for versatile storage options.
Check Stock

MUNTE - SS304 Stainless Steel Female Threaded 3 Way Tee T Pipe Fitting 1/8" 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" BSP Threaded (1")

  • Pipe Fittings and Tools include: Pipe fittings,copper pipe fittings, black iron pipe fittings, water pipe fittings, stainless steel pipe fittings, cpvc pipe fittings, iron pipe fittings, ABS pipe fittings, RV pipe fittings, Pipe fitting tools, PVC pipe fittings, PE pipe fittings..
  • Metal pipe fittings, Stainless steel pipe fittings, Socket, Female socket, Male socket, Wye, Tee 90, Elbow 90, Elbow 45, Reduced valve, Female elbow 90, Male elbow 90, Reduced tee, Reduced bush, cleanout, End Cap, PVC solvent cement, Clamp saddled, Flange, Steel backing ring, Adaptor, P trap with cleanout plug, Gasket, Valve.
  • Products are well manufactured, durable and have a long life, easy to disassemble and move during use..
  • Excellent quality, fast delivery, good after-sales. We promise to do everything in our power for you to be 100% satisfied.
Check Stock

Gas Discharge Tubes - GDTs / Gas Plasma Arrestors 60volts (10 pieces)

  • Q179A is a gas pilot assembly (with a flame electrode rod) and ignition electrode, making it suitable for applications requiring an interrupted or intermittent electrically ignited gas pilot burner.
  • Primary aerated type burner is equipped with stainless steel fins that provide the proper flame rod area to ground area ratio for maximum flame signal and flame stabilization.
  • Stainless steel electrode(s) are mounted in ceramic insulators, which permit electrode adjustment.
  • Rajah connectors facilitate disconnecting (A1126 has terminal screws).
Check Stock

MX Bimini Top Fitting Hardware Set Fit 7/8',Boat Jaw Slide,Cap Eye End,Deck Hinge(6pcs)

  • Bimini Top Fittings Hardware Set Black Nylon 6 PCS.
  • 7/8 inch tube bimini top fittings hardwares set.
  • Bimini fittings set included: 2 pcs nylon eye end cap fittings, 2 pcs nylon jaw slide fittings, 2 pcs nylon deck hinge fittings with screws..
  • Bimini top hardware made of durable black nylon.
  • The bimini top fitting kit easy to install,very convenient.
Check Stock

THE VORTEX COMPANY Navy Blue/Dark Blue Square Tube Frame 4 Bow Pontoon/Deck Boat Bimini TOP 8' Long, 91-96\ Wide

  • Bimini Top Hardware Set Black Nylon 12 PCS.
  • Marine hardware for bimini top set 12 pcs for 3 bow boat top cover.
  • 7/8 inch bimini top fittings hardwares set.
  • Bimini fittings set included: 6 pcs nylon eye end cap fittings (outside version), 4 pcs nylon jaw slide fittings, 2 pcs nylon deck hinge fittings with screws..
Check Stock

Spears 447 Series PVC Pipe Fitting, Cap, Schedule 40, 2' Socket

  • 【Apply To】Cap for closing the end of 2" pipe or fitting, which outside diameter of 2.374". Socket end for connecting to unthreaded pipes or fittings..
  • 【Material】6 pcs Heavy Duty 2 Inch PVC Pipe End Cap Fitting Made of high-quality PVC, high-impact strength, resistant to frost and corrosion, long service life..
  • 【Easy Installation】They are non-toxic, lightweight and easy to install. Installation requires the use of primer and solvent cement..
  • 【Wide Application】Furniture-Grade Parts, suitable for indoor and outdoor use.
  • Pressure Fittings are used in irrigation, underground sprinkler systems, swim pools, outdoor applications and cold water supply lines, etc..
  • 【Use with Confidence】Meets ASTM D2466 and D1784 standards, comply with NSF requirements..
Check Stock

DP Dynamic Power Recoil Air Hose 25-ft.x 1/4-inn Polyurethane Hose 200 PSI

  • 1/4-In.NPT Solid Brass Fittings Including Rigid Male End and Swivel Female End to Reduce Hose Twist.
  • Extreme Weather Flexibility: -30 F to 180 F.
  • Fittings are Filed Repairable For Easy Maintenance.
Check Stock

Goodyear 50' x 3/8

  • 100-percent made and assembled in the USA.
  • Bend Restrictors Prevent kinks near end Fittings.
Check Stock

DCT Dust Collector Accessories Kit – 1.25in x 10ft Vacuum Hose, Dust Collection Fittings, and Vacuum Reducer

  • ENHANCE DUST COLLECTOR EFFICIENCY: Create a vacuum system with the DCT | Woodworking Dust Collection 1.25” x 10’ Dust Hose with Fittings & Reducers and use to collect shavings and dust from your woodworking power tools.
  • Use as the last stage from your dust collector to your tool with 2.5-inch (6.4cm) ports with 1.5-inch (3.8cm) accessories.
  • Shopvac hose pairs with dust extractors and dust collection systems (not included) to prevent dust buildup.
  • PERFECT SIZE: 1.25-inch (3.2cm) outside diameter (OD) and 1-inch (2.5cm) inside diameter (ID) with a 1.2-inch (3cm) OD and 1-inch (2.5cm) ID small end fitting, 1.75-inch (4.4cm) OD and 1.5-inch (3.8cm) ID large end fitting, and 2.5” x 1.5” inch (6.4cm x 3.8cm) reducers to fit your attachments (measure application to ensure fitment).
  • 10-foot (3m) long vacuum hose for ample room to reach your equipment.
  • Small diameter for flexibility and maneuverability.
  • LET THE MAGIC HAPPEN: Included fittings screw into each end of the shop vacuum hose and fit snugly with the fittings on your existing power tools.
  • The small end of the dust collection pipe is ideal for connecting a random orbital sander, palm sander, biscuit joiner, or any other power tool with small dust collect....
Check Stock