Top End Fitting Insulator Reviews

EVIL ENERGY 6AN PTFE Hose End Fitting 90 Degree Black for PTFE Hose Only

Please Attention that the 6AN PTFE hose end can be work with PTFE fuel line ONLY..
Thread Size of 6AN PTFE Fitting is 9/16-18UNF and work with PTFE fuel line(Hose ID: 0.31 inch OD: 0.43-0.47 inch)..
The PTFE hose end is reusable, just replace a new ferrule if you reinstall the fitting..
EVIL ENERGY Provide plently kind of fuel fittings, Swivel, push-on lock, PTFE hose end and other fitting adapters..
Warrany: EVIL ENERGY provide PTFE hose end 6-month warranty. We value your shopping experience and strive to offer a high-quality product and service..

Check Stock

7004R Tuff Tainer - 16 Compartments (Includes (9) Zerust dividers)

INDOOR / OUTDOOR RESISTANCE - Our tuff tying twine is perfect for a wide range of indoor and outdoor applications. Polypropylene is almost 100% waterproof and floats on water, making it useful for most marine and nautical applications. The synthetic fibers feature high-end resistance to temperature, oils, alkalis, and gasoline. Electricians choose polypropylene because it acts as a lightweight and flexible insulator..

Check Stock

Whitecap Industries G-3460SSC Stainless Steel Gas Spring - 12\ to 20\

【Material】 - M8 thread is made of PA66A5,simple design, good quality, durable..
【Feature】 - Gas spring strut joint connector end fitting..
【Advantage】 - Gas spring end fitting connector can be used over and over again,easy removal..
【Application】 - Gas spring end fitting connector is a good replacement of gas springs ball strut, and the gas springs are ideal motion control devices for lifting, holding, counterbalancing, and providing support for applications such as horizontally hinged doors, lids, hoods and canopies..

Check Stock

MFJ-16E01 Extra Strong Fiberglass 450 Ohm Ladder Line End Insulator with SO-239 Connector

The MFJ-16E01 is an extra strong fiberglass, 450 Ohm ladder line end insulator..
It has a double weave ladder line for stress relief..
It is built in with an SO-239 connector..

Check Stock

EVIL ENERGY Fuel Filter Regulator 58 PSI Kit for LS Swap EFI Conversion

... Installation: fuel filter regulator kit for LS Swap EFI Conversion can be installed anywhere between the tank and the engine, although it is usually installed in the engine compartment to make it easy to obtain even more uniform fuel pressure. Mounting bracket and rubber insulator are included to make installation a breeze..
Package Included: 1pcs fuel filter/regulator, 1pcs 3/8'' EFI push on lock fitting for inlet, 1pcs 5/16'' EFI push on lock fitting for return, 1pcs 6AN male to 3/8 male push on EFI fitting for outlet..

Check Stock

Kegerator Tower Insulator for Beer Tower - Neoprene Design - Perfect Fit for Kegerator Tap Tower - Easy to Use Beer Tower Cooler Accessory (3.0\ Diameter Beer Tower)

MAINTAINS ICY COLD BEER TOWERS: Upgrade your beer dispenser with this simple to use Neoprene kegerator tower insulation sleeve. Ensure that every pour from your draft beer tower comes out icy cold. Even the first!.
END FOAM NOW: Maintain a constant temperature throughout your kegerator system with a Keg Tower Insulator. Beer warms rapidly as it travels through a poorly insulated beer tower. Our product reduces foamy pours and wasted beer..
SAVE ELECTRICITY WITH LITTLE EFFORT: The added insulation of a Keg Tower Insulator will reduce kegerator energy consumption. Unlike kegerator tower cooler chiller fans, our product takes only seconds to install..
MINIMIZE CONDENSATION: Kegerator towers sweat. Condensation buildup is a sign of poor insulation and will lead to corrosion and rust. Increase the lifetime of your kegerator with a beer tower cover..
HIGH QUALITY MATERIAL AND BUILD: Crafted from high quality Neoprene with heavy-duty double stitching. Easy to clean and guaranteed to last. 3” Diameter and 11.5” Height. Ideal for double tap beer towers..

Check Stock

QMINOX 2 Inch × 1.5 Inch Sanitary Fitting End Cap Reducer Stainless Steel 304 Sanitary Concentric Reducer Tri Clamp Clover

End Cap Reducer Ferrule Size 64mm = 2 Inch Tri Clamp.
End Cap Reducer Ferrule Size 50.5mm = 1.5 Inch Tri Clamp.
Concentric End Cap Reducer Fitting to Connect 2 Pipes of Different Diameters That are Along The Same Pipe Axis.
Sanitary Fitting clamps to tubing on both ends for a non-permanent seal, providing take-down access.
Stainless Steel 304 Sanitary Fitting for Resistance to Corrosion and High Temperatures.

Check Stock

Oatey 43551 Replacement Ring, for Use with 4 in Closet Flanges, 3-Inch or 4-Inch, Brass

3 countersunk holes and 3 closet bolt slots for secure attachment to the floor.
3-Inch Spigot Closet Flange fits inside the hub end of 3-Inch Schedule 40 DWV fitting.
4-Inch Spigot Closet Flange fits inside the hub end of 4-Inch Schedule 40 DWV fitting.
Solvent weld into fitting-short throat length is perfect for use in tight spaces and where the fitting is close to the sub-floor.
Four mounting slots for proper fit and alignment of closet bolts to the toilet.

Check Stock

Power Steering Hose Kit for 1982-88 T-Bird Steering Rack to GM Pump

Adapts an aftermarket 1982-1988 T-Bird/Cougar type rack to a GM Type 1 Saginaw pump.
Pressure line has a 5/8"-18 male inverted flare fitting at the pump end.
Adapter for the GM pump, to allow it to work with both metric O-ring and standard inverted flare style threads on the power steering pump fitting..
Features a -6AN to an 9/16"-18 O-ring fitting on the rack end.

Check Stock

iMopo 70 Pack Drip Irrigation Universal 1/4 Barbed End Plug Fittings Barbed Connectors for Drip or Sprinkler System

【Great Value】：Comes with 70 pieces barbed end plug fittings in total,enough to meet your daily use..
【DURABLE MATERIAL】：Made of high-impact,UV-resistant and chemical-resistant materials,durable and reliable to assure a long life using time..
【BARBED DESIGN】：Barbed end plug fittings tight fits universal 1/4" drip tubing,barbed design ensures the tubing will not slip and leak..
【EASY TO INSTALL】:Barbed end plug fitting is easy to be installed without glue, tools, or clamps.Push the tubing firmly over the end plug fitting.Warm tips:Put the tubing end into 75°~85° hot water 10 seconds before pushing them..
【FOR WIDE APPLICATIONS】:Barbed end plug fittings are Great for use with raised garden beds,lawn,greenhouse gardening and agricultural watering applications..

Check Stock

OKBA RV Vent Covers for Roof 14'x 22'x2.75', RV Skylight Cover for RV Trailer Camper/RV Shower Skylights,RV Vent Insulator with Reflective Surface

The rv skylight cover with 2.75" thick insulating foam and with double layer reflective surface which can reflect harmful UV-RAYS. Latest upgrade design rv vent insulator is both a cold insulator and heat insulator..
Fits for 22" x 14 x 2.75" RVs/Campers/Trailers shower skylights/vents,make sure the RV/camper skylight is vertical and depth is greater than 2.75" without obstructions..
The rv vent cover for roof will be completely return to its original shape until in 24-48 hours after you open vacuum sealed packaging,let the unfold rv vent insulation pillow lay flat..
The rv vent insulator with a removable case has a zipper,easy to remove if rv vent cover needs to wash. Easy to install, just get in vent and pull insulator cover out in one minute..
RV window insulation covering size:14x 22x2.75",package with 8pcs sewn velcro make RV sky light covers more fixed. If you have any question pls kindly let us know,we will provide 100% satisfactory service and Amazon local fastest shipping..

Check Stock

Camco RV Vent Insulator and Skylight Cover with Reflective Surface, Fits Standard 14 x 14 Inch RV Vents (45192)

Durable RV Skylight Insulator: Blocks and protects against the sun's damaging rays.
the vent insulator keeps your RV cool in the summer and warm in the winter.
3-Layer Protection: The RV roof vent insulator features a reflective layer, a foam insulating layer, and a synthetic fleece layer that provides UV protection.
Saves Energy: The RV vent insulator and skylight cover has a full 2.75-inch foam coating that blocks heat transfer and increases AC efficiency.
Compatibility: The RV skylight cover fits standard 14-inch RV vents and is machine washable.
Quality Products: Camco makes quality products for RVing, boating, camping, towing, tailgating, and grilling that help take your passion for the outdoors to the next level.

Check Stock

DC Defy Mens Jacket Twill Sz L

Color-block styling and retro outdoor-inspired details combine with the warmth of 100G of insulation for timeless good looks and cold weather comfort..
Profill Insulation - Our Go-to insulator because it provides not just loft and heat-trapping warmth but also because it allows for moisture-transport away from your body when things heat up..
Weather Defense - performance-driven outerwear for handling in the heaviest winter conditions..
StormDivision - Designed to deliver the best in all-condition breathability and weather resistance..
Commitment to Sustainability - 100% recycled packaging and hang tags, and the end result is our most eco-friendly product line to date..

Check Stock