Top Emergency Cylinders Reviews

Zebra DNA Luxfer L6X Aluminum CO2 Tanks with CGA320 on/off Valve (Natural, 5 LB)

  • Cylinders are made from Luxfer’s exclusive L6X® alloy, a proprietary version of 6061-T6 specially optimized by Luxfer metallurgists to improve its durability, fracture toughness and resistance to tearing and cracking. More than 40 million L6X cylinders in service around the world have an exemplary record for safety and dependability..
  • Highly corrosion-resistant interior and exterior—ideal for wet gases.
  • Cylinders perform well at low temperatures..
  • Lightweight––up to 40 percent lighter than comparable steel cylinders..
  • Cylinders meet or exceed all regulatory standards worldwide..
  • Luxfer’s exclusive “Safety First” training program that provides manuals, inspection guides, safety bulletins, reference materials, shop posters, videos and other training materials free of charge to promote safe use, storage and inspection of aluminum beverage cylinders. Consistent with Luxfer’s position as the world’s leading manufacturer of high-pressure aluminum gas cylinders, educational offerings are available in multiple languages and formats..
  • Cylinders cycle-tested in excess of 100,000 cycles at service pressure..
  • Minimum burst pressure tested to 2.5 times service pressure without failure....
Check Stock

MOSTPLUS 11127522159 Engine Valve Cover w/Gasket Hardware LH Driver Side Compatible for BMW 5 6 7 Series X5 Cylinders 5-8

  • Fitment: Compatible with 2004-05 BMW 545i Driver Side Cylinders #5 - 8 Valve Cover.
  • Compatible with 2006-10 BMW 550i Driver Side Cylinders #5 - 8 Valve Cover.
  • Compatible with 2004-05 BMW 645Ci Driver Side Cylinders #5 - 8 Valve Cover.
  • Compatible with 2006-10 BMW 650i Driver Side Cylinders #5 - 8 Valve Cover.
  • Compatible with 2002-05 BMW 745i Driver Side Cylinders #5 - 8 Valve Cover.
  • Compatible with 2002-05 BMW 745Li Driver Side Cylinders #5 - 8 Valve Cover.
  • Package Includes: 1 x Engine Valve Cover Set(.
Check Stock

SENRISE 100 X Transparent Shrink Wrap Film Bag Heat Seal Gift Packing for Homemade DIY Project Packaging Candle Jar Bath Bomb Gift 2235CM

  • ...hine is composed of operation panel, temperature control module, PLC, input & output module, proportion board, contactors, voltage stabilized source, air swtiches, mid relays, proximity switches, inverter and motors. The operation panel contains power switch, touch screen, alarm, hot cutter knob, auto cycle button, emergency stop button, action reversion button, extruding speed button..
  • MECHANICAL STRUCTURE: Clamping unit of extrusion blower moulding machine is composed of front & back platens, clamping seat, carriage seat, mould stroking & clamping hydraulic cylinders, synchronizing mechanism, with the structure of nether crank design. Platen movements open & close, carriage up & down is assisted with linear guide rails & ball bearing sliders to increase action smoothness and position precision..
Check Stock

1L Scuba Tank Scuba Gear with Mask Saftey Lanyard Compressor Dot Attestation Scuba Diving Accessories Diving Tank Equipment 20 Mins Underwater Breathing Spare Air Corrosion Resistant Scuba Diving Kit

  • 2.【Large capacity】: The scuba cylinder has a capacity of 1L and can be used for 20-25 minutes of diving time. (The specific time varies from person to person). It is an alternative breathing air source specially designed for leisure scuba, and can be used as a backup air source for multi-functional emergency rescue in many fields (fire fighting, household, marine and river emergency rescue, etc)..
  • 3.【Easy breathing】: Easy breathing full face mask with scuba oxygen tank, natural breathing through the nose and/or mouth, allowing you to breathe smoothly in the underwater world, allowing you to appreciate the underwater scenery more easily..
  • 【Refill adapter】:The refill adapter is used to fill large diving oxygen cylinders. The operation is simple and easy to use, easy to dive, no need to carry a big dive. Let you experience diving better..
  • 5.【Diving Packages】:DEDEPU professional perfect diving packages: 1*1L S5000 Air Tank, 1*Manual Pump, 1*Refill Adapter, 1*Diving Storage Bag, 1*Snorkeling Mask, 1*Hand Bag, 1*Mask Converter. We have U.S warehouse, time 5-7 days..
Check Stock

AstroAI Tire Inflator Air Compressor Portable Air Pump for Car Tires, 12V DC Integrated Metal Structure Tire Pump 160PSI with LED Light for Cars, Bicycles, Motorcycles, and Other Inflatables

  • Efficient and Durable: Metal gear and cylinder structure enable a better performance than plastic cylinders, and create longer service life. Continuous work for up to 20 minutes. No cooling is required during inflating 4 195/55/R15 car tires at one time (0-35 PSI).
  • three units of the air compressor displayed clearly on the LCD screen. LED light helps you may inflate or check the tires in a low-light environment..
  • Easy to use: Insert the plug in the car’s12V cigarette lighter, and connect the hose to the tire of vehicles, SUVs, motors, bikes for inflating. Note: the air compressor is incompatible with high pressure or large flow inflatables..
  • Portable&compact: Portable size, take little space. Be ready for any emergency. 10-foot(3 meters) power cord store in the small compact unit, accessories can be stored in the air compressor itself. The perfect tool for your car..
  • Purchase with confidence: Store the tire inflator in your car or garage for an emergency. Package includes 1*AstroAI 12 Volt Air Compressor, 1* Replacement Fuse, 2* Cone Inflation Adapters, 1* Inflation Needle,1* Valve Extender, and 1* User Manual. If you have any questions or concerns, please contact us at any time..
Check Stock

99.999% by Volume Nitrogen Calibration Gas, 17 Liter Steel Cylinder.

  • WIDE RANGE OF COMPATIBILITY: Most calibration accessories are designed for use with more than one instrument. Calibration cylinders are also conveniently compatible for use with the GALAXY GX2 Test System so they fit easily with other components and ensure a comprehensive safety evaluation.
  • MULTI-GAS TANK: The calibration gases within the cylinder are 1.45 % CH4 (Methane), 15% O2 (Oxygen), 60 PPM CO (Carbon Monoxide), 20 PPM H2S (Hydrogen Sulfide).
  • RECYCLABLE CYLINDER: MSA promotes recycling of Model R, Model RP, and Econo-Cal Calibration Cylinders. The calibration gas recycling program benefits a non-profit organization where cylinders are not refilled.
  • they are salvaged for scrap. Simple recycling instructions are included with every eligible cylinder..
  • RFID-TAGGED FOR EASY TRACKING: RFID technology and software offer convenient setup, recordkeeping, automatic calibration cylinder recognition, cylinder pressure, expiration warnings, and status of multiple cylinders simultaneously.
  • SAFETY & COMPLIANCE: All MSA calibration gas is supplied with individual Certificate of Analysis to NIST-traceable standard and MSDS. Cylinders, testing systems, and detectors also meet all applicable OSHA regulations and follow relevant safety standards in markets they ....
Check Stock

Belinlen 10 Pack Plastic Cylinders and Beakers Set, Including 5 Pack Clear Plastic Graduated Cylinders (10, 25, 50, 100, 250ml) and 5 Pack Plastic Beakers Set (50, 100, 250, 500, 1000ml)

  • Package Contains: 16 Pack Cylinders and Beakers Set. (5 sizes clear plastic cylinders, 5 sizes transparent plastic beakers, 5 Transfer Pipettes and 1 Test Tube Brushes)..
  • Size detail: plastic cylinders set- including 10, 25, 50, 100, 250ml, and plastic measuring cups-including 50, 100, 250, 500, 1000ml. Transfer Pipettes: 3ml..
  • Material: made of food grade thickened pp plastic, more resistant to corrosion, non toxic, durable and safe to use..
  • Special design of clear graduated lines on both cylinders and beakers which help you easily measure liquids while transferring them..
  • These cylinders and beakers sets are perfect for homeschool science experiments, students or tearchers doing chemical experiments in the lab, also great for kids Halloween costume. Nice not having glass to worry about breaking..
Check Stock

OFF ROAD BOAR Traction Boards with Jack Lift Base Recovery Traction Tracks Tire Ladder for Sand Snow Mud with Bag

  • [Suit Various Environments] The latest 4th generation of traction boards can prevent your car from getting stuck, providing emergency traction for....
  • [Excellent Performance] The traction track has 52 cylinders and 40 raised anchors to keep your tires from spinning so that you can get out of trouble....
  • [Loading Capacity] The traction mat use strong nylon material with good durability and toughness. The sand boards offer up to 10 tons of load....
  • [Easy to Carry] The size of the recovery board is 44 x 13 x 4.5 inches (L x W x H). With a black bag, you can put it in the corner of the trunk or on....
  • [Off-road Helper] Double slope design, only need to put the sand boards under your off-road vehicle tires, you can help your off-road vehicle to....
Check Stock

Coleman Propane 16 Oz Camping Cylinder 12 Pk

  • This product is hazardous/flammable and not returnable.
  • Pre-filled propane cylinders with quality steel construction, a stable base and reliable valves provide safe and easy-to-use operation. Cylinders are....
Check Stock

WORTHINGTON 310805 16.4 Oz Propane Cylinder Disposable

  • This product is hazardous/flammable and not returnable.
  • Pre-filled propane cylinders with quality steel construction, a stable base and reliable valves provide safe and easy-to-use operation. Cylinders are....
Check Stock

American Standard 83140-00.000 Piston Assembly

  • This is a set of standard 88mm Slip In Type 1 pistons and cylinders. This kit requires no machine work and will slide right in to any 1500 or 1600cc air cooled VW engine making it a 1679cc..
  • Kit includes: 4 Cylinders, 4 Pistons, A set Piston Rings, and 4 wrist pins and clips..
  • Cylinders: Cast Iron. Pistons: Hypereutectic.
Check Stock

ABN Brake Cylinder Hone – 1-1/8in 3 Stone Piston Honing Tool Cylinder Bore Hone with 3/4in to 2-1/2in Honing Range

  • ...SIER: Remove carbon, rust, and heat glaze deposits from your caliper and piston cylinder walls with the ABN | 1-1/8 Inch Cylinder Bore Honing Tool Small Engine Cylinder Hone Kit.
  • Compatible with your electric drills, simply lubricate with brake fluid and run at low speeds moving up and down the sides of your engine cylinders.
  • BUILT TO LAST: Constructed of premium metal materials provide this brake caliper hone tool with maximum strength, durability, and longevity.
  • The flexible shaft and spread-control tension nut allow faster cutting and maneuverability.
  • 3 stone design makes insertion easy by self-centering.
  • Stone sleeves add strength and protect your abrasive stones when not in use.
  • PERFECT SIZE FOR YOUR NEEDS: Rigid honing tools for a drill features 3 carbide stones that help you remove glaze build up on your brake cylinders.
  • 220 medium grit stones measure at 1-1/8 by 3/16 by 1/8 inches (2.8 by .5 by .3cm).
  • Square ends of stones make this small brake hone tool ideal for step-cut and blind-end cylinders.
  • ADJUSTABLE RANGE: Easily adjust the range and pressure placed against your cylinders for well-controlled tension and maximum effectiveness in creating a smoother, cleaner surface.
  • Spring and knurled adjusting nut increase tension and lock the drill hon....
Check Stock

Locksport 8 Place Practice Station with Set and Full Set of Practice Locks

  • Typical uses include lock repair, maintenance and adjustment.
  • This product includes 5 sample KIK cylinders and 3 sample mortise cylinders..
  • Acrylic plastic construction means light-weight, durable, easy to store..
  • Each of the 8 ports features its own nylon threaded tightening screw.
Check Stock