Top Electrical Knockout Punch Reviews

Morris 22382 Plastic Knockout Plug, 5/16-Inch, Black, 10-Pack

  • Plastic Knockout Plugs - Snap-In - Our Plastic Knockout Plugs - Snap-In are low-cost and easy to use..
  • Plastic Knockout Plugs - Snap-In plugs electrical knockouts with finger tip pressure.
  • Snap-In winged protrusion for Positive Lock.
  • Less costly & safer than steel snap-in blanks.
Check Stock

Morris 22398 Plastic Knockout Plug, 1-1/2-Inch, Black, 10-Pack

  • Plastic Knockout Plugs - Snap-In - Our Plastic Knockout Plugs - Snap-In are low-cost and easy to use..
  • Plastic Knockout Plugs - Snap-In plugs electrical knockouts with finger tip pressure.
  • Snap-In winged protrusion for Positive Lock.
  • Less costly & safer than steel snap-in blanks.
Check Stock

VEVOR 15 Ton Hydraulic Knockout Punch Kit, 1/2" to 4" Conduit Hole Cutter Set, KO Tool Kits W/Puncher 10 Piece, Metal Sheet Driver Tools, for Aluminum, Brass, Stainless Steel, Fiberglass and Plastic

  • Efficient Hydraulic 15T: Get the job done faster and more efficiently with our powerhouse hydraulic mechanism pump! The hydraulic mechanism pump produces 15T strong pressure, providing high punching accuracy and fast punching speed. Compared with standard wrenches, our knockout punch set is more labor-saving and efficient, ideal for completing big projects. The ram's angle can flexibly change to meet your various punching needs. It is also perfect for use in narrow places..
  • Built to Last: Made from a sturdy combination of 40 Cr steel and 45# steel, you can trust in its strength, sturdiness, and longevity. The stable construction is suitable for heavy-duty and frequent punching works. With laser-engraved alignment marks, positioning is a breeze, and precision is guaranteed. Store and transport the kit with ease thanks to its compact, lightweight design and durable carrying case. It's about time you knew where your tools were! No more missing parts!.
  • Comfort at its finest: Punch with ease and comfort using our user-friendly knockout set! The innovative slug splitting dies make slug removal a breeze, leaving....
Check Stock

ANBULL Hydraulic Knockout Punch Set Max 6T with 6 Dies Metric from 16mm to 32mm (Φ5/8\ to Φ1-1/4\), Hydraulic Metal Hole Punch W/Tool Case

  • 【Labor-Saving Hydraulic】: The maximum pressure of the ANBULL hydraulic knockout punch driver can reach 6 tons. It can easily open holes on the thickest 2.5mm iron plate and the thickest 1.5mm stainless steel plate..
  • 【Integrally Formed】: Integrally formed so the hydraulic knockout punch driver does not leak oil..
Check Stock

The Hillman Group 58179 2-1/2-Inch Hole Nylon Knock Out Seal, Black, 2-Pack

  • The knockout seal is ideal for electrical assemblies and can be used for covering knockout holes in electrical boxes.
  • The nylon knock-out seal features tool-free installation that can be placed easily by hand.
  • The seal features a high quality nylon that offers sturdy, reliable performance and corrosion resistance.
  • The gray color is designed to replicate the look of finished steel.
  • Comes with two seals, featuring a 2" trade size and fits a 2-1/2" diameter hole.
Check Stock

306C Pro/Tran 30-Amp 6-Circuit 2 Manual Transfer Switch

  • ...ace of 6.1*4.1*3.1 inches allows you to wire more neatly.
  • the heat dissipation effect is better, and it has a longer service life. The front panel can be removed, making installation more portable. And the 1.2-inch combination hole with 4 areas (left, right, bottom, rear) can be directly connected to the switch and electrical panel from multiple directions.
  • 100% satisfactory service: This product is an upgraded model developed by us in accordance with market needs. Its performance, material, life, safety and other aspects are optimized、upgrade by our professional engineers, and we provide customers with 18 Month’s high-quality after-sales service.
  • if you have any questions, please feel free to contact us.
  • Important❗❗We are committed to providing safer power transmission and make it comply with ETL standards, so we have set a more solid knockout to ensure that it is not easy to be penetrated to improve safety. It is necessary to use professional tools to penetrate (such as bi-metal hole saw/knockout punch).
  • If you encounter any problems, please feel free to contact us!.
  • ❗❗If you damage the 30 Amp generator plug because you can’t get through the Knockout, you can try to contact us first (email or through the seller’s contact tool), we will....
Check Stock

HORUSDY 28-Piece Heavy Duty Punch and Chisel Set Including Taper Punch Cold Chisels Pin Punch Center Punch

  • Available in 28 different shapes and designs, including: bolt hole alignment, ball head separation, unfolding knuckle, center punch, knockout bolts and pins..
  • Product material: made of chrome vanadium steel, hardness: 54~58HRC, Heat treated chromium vanadium provides a high hardness rating that prevents rapid expansion of the head and passivation of the chisel and punch..
  • 16PC Chromium Vanadium Steel：punch and chisel set comes with 16-pc. chrome vanadium punch and chisel set, 5-pc. pin punches, 5-pc. taper punch, 3-pc. cold chisel, 2-pc. center punch and chisel punch gauge..
  • 12PC High Carbon Steel：6PC cold chisel set, 4PC pin punch set and 2PC center punch..
  • It is equipped with a special storage bag for easy carrying..
Check Stock

SWANLAKE 28PCS Heavy Duty Punch and Chisel Set,Taper Punch, Cold Chisels, Pin Punch, Center Punch

  • 1.This 28pcs punch and chisel set contain: 16pcs punch and chisel set made of chrome vanadium,12pcs punch and chisel set made of carbon steel ..
  • 2.Heat treated chromium vanadium provides a high hardness rating that prevents rapid expansion of the head and passivation of the chisel and punch..
  • 3.Available in different shapes and designs, including: bolt hole alignment, ball head separation, unfolding knuckle, center punch, knockout bolts and pins..
  • 4.Flat chisels are tempered to resist splitting and mushrooming..
  • 5.Roll-up storage pouch makes easy storage..
Check Stock

SEDY 16-Piece Punch and Chisel Set, Including Taper Punch, Cold Chisels, Pin Punch, Center Punch

  • Available in 16 different shapes and designs, including: bolt hole alignment, ball head separation, unfolding knuckle, center punch, knockout bolts and pins..
  • Product material: made of Chrome Vanadium Steel, hardness: 54~58HRC. Heat treated chromium vanadium provides a high hardness rating that prevents rapid expansion of the head and passivation of the chisel and punch..
  • 5PC Tapered punch: 3/32" x 5-1/4", 1/8" x 5-3/4", 5/32" x 6", 3/16" x 6-1/4", 1/4" x 6-3/4".
  • 5PC Punch: 3/32" x 4-1/4", 1/8" x 4-3/4", 5/32" x 5", 3/16" x 5-1/4", 1/4" × 5-3/4".
  • 3PC Cold Chisels: 3/8" x 5-1/2", 1/2" x 6", 5/8" x 6-1/2".
Check Stock

Greenlee 7646 Hydraulic Knockout Punch Driver

  • Compatibility - works with all Greenlee knockouts. Same draw studs used with Intel-PUNCH , LS50L2 and 746A ram.
  • Package dimensions:18.7"L x 5.7"W x 16.4"H.
Check Stock

HORUSDY 16-Piece Punch and Chisel Set Including Taper Punch Cold Chisels Pin Punch Center Punch

  • Available in 16 different shapes and designs, including: bolt hole alignment, ball head separation, unfolding knuckle, center punch, knockout bolts....
  • Heat treated chromium vanadium provides a high hardness rating that prevents rapid expansion of the head and passivation of the chisel and punch..
  • 5PC Tapered punch: 3/32" x 5-1/4", 1/8" x 5-3/4", 5/32" x 6", 3/16" x 6-1/4", 1 /4" x 6-3/4" and 3PC Cold Chisels: 3/8" x 5-1/2", 1/2" x 6", 5/8" x....
  • 5PC Punch: 3/32" x 4-1/4", 1/8" x 4-3/4", 5/32" x 5", 3/16" x 5-1/4", 1/4" × 5-3/4" and 2PC Center punch: 1/8" x 5", 3/16" x 6".
  • Product material: made of chrome vanadium steel, hardness: 54~58HRC.
Check Stock

SWANLAKE Punch and Chisel Set Including Taper Punch Cold Chisels Pin Punch Center Punch 16pcs

  • Available in 16 different shapes and designs, including: bolt hole alignment, ball head separation, unfolding knuckle, center punch, knockout bolts and pins..
  • Heat treated chromium vanadium provides a high hardness rating that prevents rapid expansion of the head and passivation of the chisel and punch..
  • 5PC Tapered punch: 3/32" x 5-1/4", 1/8" x 5-3/4", 5/32" x 6", 3/16" x 6-1/4", 1 /4" x 6-3/4" and 3PC Cold Chisels: 3/8" x 5-1/2", 1/2" x 6", 5/8" x 6-1/2".
  • 5PC Punch: 3/32" x 4-1/4", 1/8" x 4-3/4", 5/32" x 5", 3/16" x 5-1/4", 1/4" × 5-3/4" and 2PC Center punch: 1/8" x 5", 3/16" x 6".
  • Product material: made of chrome vanadium steel, hardness: 54~58HRC.
Check Stock

TEMCo Hydraulic Knockout Punch Driver Electrical Conduit Hole KO Tool 3/4 -16

  • Hydraulic unit provides true 13 US ton hydraulic punching force..
  • Compatible with GREENLEE and other domestic punch tooling, draw studs or arbors that use - 3/4-16 & 3/8-23 thread sizes.
  • Hydraulic unit is the same unit used for TEMCo TH0037 Knockout Punch..
Check Stock