Top Elbow Tee Reducer Flange Reviews

(30) 1/2\ Brass PEX Fittings 10 Each Elbow TEE Coupler Reducer Lead Free Crimp Cinch PEX GUY

  • Manufactured to ASTM Standard F1807 and CSA B137.5 for use with any SDR-9 PEX tube. COMPATIBLE with ONLY Crimp or Cinch Type rings and/or connectors. NOT Compatible with: -Expander Fitting System, Uponor/Wirsbo Expander System.
  • Lead free brass. Great for any potable water and radiant heating application..
Check Stock

53pcs Cable Clamps Assortment Kit, 304 Stainless Steel Rubber Cushion Pipe Clamps in 6 Sizes 1/2'' 1'' 1.25'' 1.5'' 1.75'' 2''

  • The New Pipe Alignment Clamp with Quick-Acting Screw is a fast, accurate fit-up clamp with a rugged frame for use in the shop, or at the job site..
  • Get a well-balanced hold on the Pipe Alignment Clamp with the two wide Grip Plates while pressing the Quick-Acting Button. The threaded screw smoothly glides up and down for fast jaw opening and clamp removal after welding..
  • The long life clamp is made of double-walled powder coated steel. Align pipe for joining pipe to elbow, pipe to tee, or pipe to flange..
Check Stock

BLACKHORSE-RACING 3' Vband 90 Degree Elbow Adapter Flange Kit to T4 Turbo 304 Stainless Steel Cast

  • ▲ 304 Stainless Steel Cast and Machined Adapter, with Tight Radius. Works for Many Turbo Applications. Vband Flange Allows Rotation of the Turbo At Any Angle. Flange Is Threaded with 4 M10x1.5 Holes.
  • ▲ Cast Turbo Elbow Adapter + Vband Flange and Clamp Kit, One Pair. T4 to 3" V-Band.
  • ▲ Flange Is Threaded with 4 M10x1.5 Holes, T4 Turbo Flange (to Turbo Side).
  • ▲ 3" Vband Flange (to Header/Manifold Side).
  • ▲ Thanks for your encouraging review and feedback! It really increases our service level and passion of work! Incase you meet problem with our products, please contact us first before you give feedback and review. We will assure you will get the best solution and service..
Check Stock

Aquaiaw Wall Supply Elbow with Flange Solid Brass Electroplate Matte Black Wall Union W/Handshower Holder Tapered 1/2 NPT Female Inlet Square Wall Supply Elbow W/Hand Shower bracket G1/2 Outlet

  • 1. Surface finishing is Electroplate Matte Black..
  • 2. Aquaiaw wall supply elbow with O-ring flange, is all made of heavy-duty solid brass. Flange is also made of heavy-duty solid brass. This product is....
  • 3. For compliance with your in-wall pipes, water supply inlet is 1/2 NPT female connection. The O-Ring flange could move forward and backward by about....
  • 4. Water outlet is G1/2 male connction for shower hose. Aquaiaw wall supply elbow is integrated with holder for handheld shower head..
  • 5. Square wall union with bracket for handheld shower head. Any inquiry, please send Message to us on Amazon..
Check Stock

Aquaiaw Wall Supply Elbow with O-Ring Flange Tapered 1/2 NPT Female Inlet Solid Brass Wall Union W/Handshower Holder Round Wall Supply Elbow W/Hand Shower bracket Polished Chrome G1/2 Outlet

  • 1. Aquaiaw wall supply elbow with O-ring flange, is all made of heavy-duty solid brass. Flange is also made of heavy-duty solid brass. This product is....
  • 2. For compliance with your in-wall pipes, water supply inlet is 1/2 NPT female connection. The O-Ring flange could move forward and backward by about....
  • 3. Water outlet is G1/2 male connction for shower hose. Aquaiaw wall supply elbow is integrated with holder for hand shower..
  • 4. Polished chrome surface finishing. Round wall union with bracket for handheld shower head. Any requiry, please send Message to us on Amazon..
Check Stock

Moen 1026 AMC Kitchen Products Garbage Disposal Drain Elbow & Gasket Replacement Part, N/A

  • Replacement Garbage Disposal 1-1/2" Diameter Drain Elbow And Gasket Kit.
  • Fits All Moen, Waste King And Whirl Away Garbage Disposals.
  • Installation Kit Includes Drain Elbow With Gasket, Flange And Two Screws.
  • Backed by Moen's One Year Limited Warranty.
Check Stock

Aquaiaw Wall Supply Elbow with Flange Tapered 1/2 NPT Female Inlet Solid Brass Wall Union with Handshower Holder Square Wall Supply Elbow with Hand Shower bracket PVD Brushed Nickel G1/2 Outlet

  • 1. Aquaiaw wall supply elbow with flange, is all made of heavy-duty solid brass. Flange is also made of heavy-duty solid brass. This product is called....
  • 2. For compliance with your in-wall pipes, water supply inlet is 1/2 NPT female connection..
  • 3. Water outlet is G1/2 male connction for shower hose. Aquaiaw wall supply elbow is integrated with holder for hand shower..
  • 4. Brushed nickel surface finishing. Square wall union with bracket for handheld shower head. Any requiry, please send Message to us on Amazon..
Check Stock

60:1 Worm Gear Speed Reducer Reduction Gearbox Ratio Gear Box

  • Input Bore Size: 11mm Input Flange Model: NEMA23.
  • Output Bore Size: 14mm Application: Matched with Servo/Stepper Motor.
Check Stock

Planetary Gearbox Reducer Stepper Speed Reducer High Torque for Nema34 Stepper Motor Ratio 4:1

  • Planetary Reducer for NEMA34 (Flange=86mm) Stepper Motor.
  • Advantages Longevity, high precision, low noise.
Check Stock

NDS 422G 4' Pop Up Drainage Emitter with Elbow, 4 Inch, Color may vary

  • Works with a complete drainage system to release collected stormwater runoff and standing water to a discharge point before it causes costly property damage. Provides collected water a point of release at water-safe areas downstream and away from structures, erosion-prone landscapes, and poor drainage areas.
  • Elbow connects to 4 in. sewer and drain pipe, no fitting necessary.
  • connects to other pipe types using appropriate adapters. Releases collected water up to 40 GPM. Supports pedestrian traffic including lawn tractors, when properly installed.
  • Pop-Up Drainage Emitter comes with elbow securely attached for an easier install. Outside flange prevents grass from growing over the cover.
  • Cap, or cover, pops up as high as 1 in. once water pressure builds.
  • closes as flow diminishes. Small weep hole in elbow drains out any water in the pipe to prevent stagnation or freezing in cold weather.
Check Stock

1/2\ Floor Flange, Home TZH Malleable iron Pipe Fittings for Industrial vintage style, Flanges with Threaded Hole for DIY Project /Furniture/ Shelving Decoration (10 Pack)

  • 3/4 INCH PIPE ELBOW – TEN PACK: Our Brooklyn Pipe cast iron fittings 10 pack elbow pipes are made with from superior steel with 100% durability and strength and provides you with great flange elbow fittings at a very affordable price..
  • PERFECT FOR DIY: Whether you’re looking to build a pipe shelf, pipe towel rack, pipe lamp, our malleable 90 degree elbow industrial fitting is up to the task. These fittings are for decor and DIY projects only, they are not rated to carry gas or water..
  • RAW IRON: Our 3/4 inch black malleable iron pipe fittings are raw and unfinished iron. This means that you will need to seal or paint the flanges for your project. When handling raw iron, it’s normal for your hands to get dirty. You’ve probably seen iron workers in movies, they don’t come home clean!.
  • ONE CONVENIENT PACK: Our 3/4 90 degree elbow threaded flanges fittings pipes give you 100% super convenient benefits than other bands because our Brooklyn Pipe elbow is designed to be compatible with your all project parts.
  • UNLEASH YOUR CREATIVITY: We inspect and pack each pipe fitting and we offer a LIFETIME warranty on our products, just give us a call or send an e-mail. Now, with our black pipes bring the rustic, industrial style into your home, office or any inte....
Check Stock

Exhaust Header Manifold For Chevrolet LS1 LS6 LSX V8 Turbo+2 x Elbows T3 T4 To V Band 3.0

  • Huge 1 3/4" Stainless Primary Tubes (true 1 3/4 unlike the others listing the same header by multiple companies with multiple sizes).
  • 7/16" Thick Flanges 3" V-Band Collectors, CNC Mandrel Bent Pipes for Excellent Flow, 4 to 1 Header Design to Create a Compact Package for Universal.
  • T3 : hole to hole 45*86mm/T4 : hole to hole 70*83mm/V band Flange 80mm ID 93mm OD.Cast Turbo Elbow Adapter T3 T4 to 3" V-Band SS304.
  • 304 Stainless Steel Cast and Machined Adapter, with Tight Radius. Works for Many Turbo Applications. V band Flange Allows Rotation of the Turbo At Any Angle. Flange Is Threaded with 4 M10x1.5 Holes.
  • Application : Small Block V8 LS1/LS2/LS3/LS6 LSX 4.8L, 5.3L, 5.7L, 6.0L, 6.2L.
Check Stock

Yuanshikj Industrial (6Pc 3.9\x5.9\) Black Pipe Shelf Brackets Double Flange Bracket Iron Metal Fittings DIY Shelves Vintage Furniture Wall Mounted Heavy Duty Decorative Rustic Shelving Bracket

  • SIZE: Flange 、elbow、 Pipe Diameter 3/4".
  • (Including flange and elbow) ；The Width is customizable depends on yourself mind.
  • Applicable sites: Each purchase will include all of the parts needed (pipes and fittings) to complete this open pipe shelf system.You can use it “DIY” your's bookshelf、kitchen shelf、bathroom shelf、flowers shelf、and so,add extra space；.
  • Easy to Assemble: easy to put together, assembled the entire unit.
  • leveled and screwed in the top- then worked way down, leveled then screwed into the wall, all around. The unit is steady. Definitely need wall anchors though..
  • Quality Control Standards: strictly control standards .There was a LOT of precise measuring to make sure that all of the screws lined up with the studs and all of the pipes were flush and level..
  • NOTICE:This item just include pipe shelf hardware, planks not included , can be it spaced more or less depending on thickness of shelf boards and preference of spacing (size of shelf unit). Shelf brackets can hold 80 pounds if properly fastened into wood wall framing..
Check Stock