Top Ejector Manufacturer Reviews

1102RP Replacement Pump for S1101 & S1102

Replacement pump for the S1101 and S1102 PowerFlush Sewage Ejector Add-on Bathroom System.
Includes 90 Day Manufacturer's Limited Warranty.

20% Thinner Wall Construction - Faster Cutting due to less material being removed for the same size hole. Duel Alternating Tooth Geometry - More aggressive cutting as well as increased chip ejection. Cuts up to 15% faster..
Proprietary Steel and 3 Hardness Zones - Makes the bit less susceptible to breakage. 3/4" Weldon Shank - Fits most small magnetic drill presses. One Centering pin size for all 2" depth cutters. Ejector pin sold separately..

GREAT PERFORMANCE - 1 hp, max. flow rate is 910 gallons per hour @ 40 psi, 1-1/4 in. suction and 1 in. discharge and drive ports..
AUTOMATIC OPERATION - Pressure switch is pre-set at 30-50 psi for automatic operation..
DUAL VOLTAGE - 115V/230V motor, factory set for 230V with the quick change voltage selection switch inside motor cover box..
DURABLE - Rugged cast iron pump body for durability and dedicated priming port for volute filling, and includes ejector kit..
WORRY FREE – 2 year manufacturer's warranty..

...d Materials】: Stainless Steel, not easy to bend,not rust,very sturdy and durable.will not damage at the original paints.You need not to repaint the surface of the vehicle.
【Diverse Design】:Sharp, Flat & Round Ends.
diameter: 4mm-6mm, Length: 26cm-57cm，Note: The size of this set is as shown in the figure. The ejector pin is thinner than other ejector pins and is suitable for small dents. And it can withstand a limited weight.If you need to repair large dents, please choose a large ejector set. For example, the A and B models of the ejector set..
【Can Be Widey Use】: Our Paintless Dent Repair Tool is suitable for the sheet metal processing of automobile, refrigerator, Motorcycle Body and washing machine Body etc.

GREAT PERFORMANCE – 3/4 hp, max. flow rate is 720 gallons per hour @ 40 psi, 1-1/4 in. suction and 1 in. discharge and drive ports..
AUTOMATIC OPERATION - Pressure switch is pre-set at 30-50 psi for automatic operation..
DUAL VOLTAGE - 115V/230V motor, factory set for 230V with the quick change voltage selection switch inside motor cover box..
DURABLE - Rugged cast iron pump body for durability and dedicated priming port for volute filling, and includes ejector kit..
WORRY FREE – 2 year manufacturer's warranty..

GREAT PERFORMANCE – 1/2 hp, max. flow rate is 310 gallons per hour @ 40 psi, 1-1/4 in. suction and 1 in. discharge and drive ports..
AUTOMATIC OPERATION - Pressure switch is pre-set at 30-50 psi for automatic operation..
DUAL VOLTAGE - 115V/230V motor, factory set for 230V with the quick change voltage selection switch inside motor cover box..
DURABLE - Rugged cast iron pump body for durability and dedicated priming port for volute filling, and includes ejector kit..
WORRY FREE – 2 year manufacturer's warranty..

Ejector system keeps toast warm until the ejector lever is pushed up.
Extra-wide, 28-mm slots accommodate a variety of bread products.
Award-winning ProHeat elements increase toasting efficiency and element longevity.
adjustable rear foot.This toaster is fitted with heavy duty elements made from the finest quality clear mica, and 80/20 nickel chrome.
Switch-system controls the degree of browning.

Cast iron 3/4 HP convertible well jet pump made in the USA using a Majority of US Content – includes pump, motor, pressure regulator body, flow control screw and pressure switch (order ejector and pressure gauge separately).
Designed for use with single pipe shallow wells with suction lifts from 0' to 25 feet AND dual pipe deep wells with suction lifts up to 110 feet (See capacity charts for specific performance and ejector models).
115/230 dual voltage continuous duty uni-frame 56 motor (NEMA J adaptable) with capacitor start provides maximum starting torque and thermal overload protects against overheating.
Sturdy cast iron construction includes ejector for easy serviceability, pressure switch, special priming port for easy priming, carbon/ceramic mechanical shaft seal, and easy access drain plug for winterizing.
100% factory tested and covered by Star Water Systems 2-year limited warranty.

Award-winning ProHeat elements increase toasting efficiency and element longevity. Dimensions (inch): 10.2 x 8.2 x 8.6 and Slot width is 1.1 inch.
Ejector system keeps toast warm until the ejector lever is pushed up.
adjustable rear foot. Switch-system controls the degree of browning.
Slot size: 28mm wide x 140mm high x 120mm long (front to back), Materials: Cast aluminium ends, stainless steel body.
Defrost setting gently warms frozen bread ready for toasting. Bagel setting to warm on one side and toast the other. High lift mechanism to remove small items easily.

Kit facilitates aspiration of liquids from various lab containers when used with the Gilson Safe Aspiration Station (sold separately).
Comes with a handle, tubing set, holder, stainless-steel needle adapter, tip adapter, tip adapter with tip ejector, eight-needle stainless-steel adapter, and eight-tip adapter with tip ejector.
Tip adapters and ejectors are compatible with Diamond DL10, D200, DFL10, DF30, DF100, and DF200 pipette tips.

360°swivel and quick disconnect, suitable for disposable saliva ejector universal tip..
Fit all standard saliva ejector hose ends, mainly used for dental surgery..
Made of premium silicone material , which will not hurt your mouth..
Including 10pcs of the package, meeting your different needs..
Widely used in hospital and dental clinic, durable and reliable..

There are some faker seller sold our soil sampler now. Pls check and recongnize our brand LAKAGO and store HOMIER Store..
One-piece, lightweight, robust soil sampling equipment Made with high-quality 304 stainless steel.
With Ejector and Foot Pedal ,easy to use. Ship from USA,Fast on time develiey.
Shorten Length: 40in,Extending Length: 50in,Ejector Length: 10in,Foot Pedal Length: 3.9in,Drill Diameter: 1.5in,Grip Length: 12in.
Works best on soil that is neither hardened nor dried.

Dent Puller Repair Tool Washers Continuous Ejector needs to be used with welding gun..
It is easy to install and use. Fill the gasket and connect the welding torch to use..
Made of high-quality aluminum alloy, very durable..
Package? 1Pc Continuous ejector Washers Tools, 20Pcs Washers..