Top Easy to install Socket Reviews

ABN Spark Plug Socket Set – 6 Piece 3/8in Drive Magnetic Socket Extension Set Spark Plug Removal Tool Set

  • LONG REACHING SPARKPLUG SOCKETS: The ABN 3/8-inch drive Magnetic Socket Extension Spark Plug Extractor Set will help you install and remove deep-set spark plugs easily and quickly.
  • Set includes (1) 3/8 to 13/16-inch spark plug extension socket, (3) 3/8 to 5/8-inch swivel extension sockets, and (2) 9/16-inch socket adapters that fit your 3/8-inch square drive spark plug wrench or the included 5/8-inch extension sockets.
  • COMPATIBLE WITH YOUR VEHICLE: Fits your 3/8-inch drive spark plug wrench and ratchet tools (not included) and provides a secure grip on any 5/8-inch, 9/19-inch, or 13/16-inch diameter spark plug (not included).
  • 5/8 inch spark plug sockets offer 4.25, 6, and 11-inch (10.8, 15.2, and 27.9 cm) extension to reach deep set spark plugs while the 9/16-inch socket adapters offer an extra 2.5 inches (6.4 cm) of extension.
  • The 13/16-inch socket has a 6-inch extension.
  • SECURE GRIP ON YOUR SPARK PLUGS: Most pieces in this magnetic spark plug socket set feature a 360-degree swivel from the lengthy extension bar to provide maximum flexibility when working.
  • Knurled grip allows for a comfortable and secure hold, while magnetic socket core holds and protects spark plugs for easy removal and installation to minimize the possibility of dropping and da....
Check Stock

MOOG K750362 Stabilizer Bar Link

  • EASY TO INSTALL -- Wrench flats ensure easy installation and removal.
  • GREASEABLE SOCKET -- Inhibits corrosion and wear by allowing new lubricant to flush debris.
  • KEEPS DIRT AND WATER OUT -- Pre-installed boot shield socket components from wear-causing debris.
  • STRONG AND DURABLE -- Thick connecting rod adds strength while metal bearings and rubber preload deliver long life.
  • PREMIUM MATERIALS -- Made from premium materials for long-lasting dependability.
Check Stock

SCITOO Inner Tie Rod Installation Tool Kit with 9 Crowfoot Adapters for Most Cars

  • 【EASY INSTALLATION】- The SCITOO Installation Tool can easily and install inner tie rod, works on inner tie rods with inaccessible wrench flats.The inner tie rod can be and installed without the rack and pinion. The long socket slips over the tie rod end and the crow foot engages on the socket for easy and installation..
  • 【FEATURES】- Compatible with 1/2" drive wrench, designed for working in cramped conditions where sockets and wrenches just wont work or fit. The socket tool is forged from 45# Steel and each piece of crowfoot adapters is made of heat-treated high-quality steel for excellent strength and durability, and provide excellent protection..
  • 【PACKAGE INCLUDED】- 1x long socket tool. 9x Crowsfeet (29mm, 1-3/16inches, 1-1/4inches, 32.5mm, 1-5/16inches, 33.6mm, 1-3/8inches, 1-7/16inches, and 1-1/2inches), 1x Plastic Carrying Case..
  • 【SUITABLE】- Fits many applications on cars and light trucks. Fit for Toyota, for Nissan, for Ford, for Lincoln, for Mercury and for Chevrolet truck and SUV applications and some Cadillac Escalade, for Hummer H2, for Honda Passport and for Jeep Liberty applications..
  • 【ATTENTION】- We provide 1 year warranty for you. Before purchasing this item, please double check the product details information. If yo....
Check Stock

WYNNsky Oxygen Sensor Remover Set, Oxygen Sensor & Oil Pressure Sending Unit Master Sensor Socket Set, 7 Pieces O2 Sensor Socket Set

  • ...lowing vehicle Audi, BMW, Citroen, Mercedes, Peugeot, Renault, Skoda. These sockets feature cut-away sections allow some sockets to fit over wiring harnesses, complete with the black phosphate finish for a durable design..
  • 3/8’’ Drive × 7/8’’ ×1/2’’ Oxygen Sensor Socket/Vacuum Switch Socket removes and installs vacuum switch with a 7/8’’ hex and some oxygen sensors.
  • 3/8’’ Drive × 7/8’’ × 3-1/8‘’ oxygen sensor socket removes and installs oxygen sensors in domestic and many import vehicles. Slot in socket for wire clearance..
  • 1/2’’ Drive ×1-3/16’’ ×3-1/2’’ vacuum switch socket removes oil pressure sending units on late 80’s to mid 90’s GM models.
  • 1/2’’ Drive ×1-1/16’’ × 3-1/4’’ thermal sensor switch socket removes and installs thermal sensor switch on 1973-1977 CM vehicles.
  • 3/8’’ Drive ×1’’ and 1-1/16’’ ×3’’ remove oil pressure sending units. Deep design fits switches up to 2-5/8’’..
  • 1/2’’ drive ×7/8’’ ×2’’ heated oxygen sensor sockets slot in socket accommodates connectors on heated oxygen sensors.
  • 3/8’’ Drive × 7/8’’ ×1-1/4’’ low profile design for use in tight spaces..
  • This set includes 1-1/16 and 1 in. oil Pressure sending unit socket, 3/8 ....
Check Stock

Scythe Mugen 5 CPU Cooler with Sealed Precision FDB Kaze Flex 120mm PWM Fan (SCMG-5100)

  • Technical Data: Model: Mugen 5 TUF Gaming Alliance Model Number: SCMG-5100TUF Ean Code: 4571225057088 Compatibility: Intel : Socket LGA775 Socket LGA1366 Socket LGA115x Socket LGA2011-v3 Socket LGA2066 AMD : Socket AM2+ Socket AM2+ Socket 3+ Socket AM4 FM1 Socket FM2+ Dimensions: 136 x 110.5 x 157.5 mm (fan included) Width, Depth, Height Weight: 950 g (with fan installed) Fan Specifications Kaze Flex 120 RGB PWM: Measurements: 120 x 120 x 27 mm Noise: from 4 .0 to 2 4.9 dBA Air flow: 16.6 to 51.17 CFM Rotation speed: 300 (±200 rpm) to 1,200 rpm (±10%) Power supply: 12V Accessories: Mounting parts for Intel and AMD sockets, fan, fan clips, thermal grease, installation manual.
Check Stock

Harmonic Balancer Socket Tool 77080 19 mm Crank Bolt Socket for Honda 3 Times Momentum Power of Standard Impact Sockets

  • GREAT COMPATIBILITY: OAL 89mm, 1/2" square drive.
  • can be used on Honda engines that use a 19mm hex pulley damper bolt or other 19mm applications..
  • SUPERIOR QUALITY: Made with heat-treated, impact quality-GB 40CR alloy steel which has longevity longer much than other ordinary steel..
  • PERFECT DESIGN: Provide more energy to removing the bolt for designed with more than 3 times the standard socket mass to direct..
  • EASY INSTALLATION: Easy to install and remove, can be perfect to install to your 19mm Hex Pulley Damper Bolt with the 19 mm Harmonic Balancer Socket..
  • SATISFACTION GUARANTEE: If you're not 100% satisfied with this Harmonic Balancer Socket Tool, simply return it for a full refund in 30 days, no....
Check Stock

Reed Tool HWB Cast Ductile Hydrant Wrench

  • Shower Valve Socket Wrench Set: The Set comes with five double end wrenches, bar handle and a bar wire holder for easy storage. The hex-shaped bodies allow for use with an adjustable wrench. There is also a hole near each end of the wrench for turning with a long screwdriver..
  • Common Size: This shower valve socket set has 5 pieces of socket with bar handle. Each 125 mm socket has been designed with different sizes helping in quick and easy wrench selection. The socket sizes are 21/32”x 27/32”, 29/32”x 31/32”, 1-1/32” x1-3/32”, 1-5/32”x1-9/32”, 1-11/32”x 1-7/16". The diameter of handle is 9mm..
  • Durable Steel Construction: Made of long lasting durable solid steel and the surface is nickel-plated. 5pcs socket set and afterburner rod are connected with a stainless steel wire..
  • Easy To Use: First, Turn off water supply. Next, Remove faucet handle cap, screw and handle, exposes valve stem and its packing nut. And then, Place correct and of wrench over valve stem onto packing nut, insert handle into opposite side of wrench. At last, Turn clockwise to tighten nut..
  • Which You Need: These plumbing socket wrench set is perfect for removing and installing tub and shower valves, fittings and nuts..
Check Stock

MOOG K3161T Ball Joint

  • PROBLEM SOLVER GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life.
  • STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength.
  • GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants.
  • KEEPS DIRT AND WATER OUT -- Pre-installed dust boot shields socket components from wear-causing contaminants.
  • EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box.
Check Stock

DEWENWILS Light Socket with Grounded Outlet Porcelain Pull Chain Light Fixture E26/E27 Base 2 Pack UL Listed

  • STURDY LIGHT SOCKET BASE - Made of porcelain materials, the light socket offers robust quality in use, providing a new lighting location in narrow....
  • ONE GROUNDED OUTLET - Equipped with an always-on 3 prong outlet, you can have a power place for an additional lights or appliance.
  • EASY INSTALLATION - The porcelain light socket is specially design for easy installation, saving your trouble from drilling holes, suitable for....
  • SMOOTH PULL CHAIN - Using pull chain to turn on/off the bulbs on the light socket, 90cm pull chain operates smoothly and long enough for use.
  • COMPATIBLE BULBS - E26/E27 bulb base, compatible with incandescent, CFL or LED bulbs (max. 660W), power rating: 125 VAC, 15A, INDOOR use only, UL....
Check Stock

9 Pack Pops Sticky Adhesive Replacement for Socket Mount Base, pop-tech VHB 3M Sticker Pads for Phone Collapsible Grip & Stand Back - 9pcs 35mm Double Sided Tapes & 4pcs Alcohol Prep Pads

  • The replacement kit comes with alcohol wipes to clean the surfaces before applying. If you plan to use the replacement kit over time you may need additional alcohol prep pads for cleaning solution. Make sure the mounting surface and socket mount base is cleaned completely before applying a new adhesive..
  • Easy to Install – simply re-stick your socket. Just peel off the old gel adhesive from socket and clean the back of phone and socket with alcohol wipe before using the new adhesive, then peel off the 3m adhesive pads to stick the base of socket mount and press down repeatedly for 5- 10 minutes for better connecting to the surface. 24 Hrs to use after installation for best results. Important Notes: if you find the 3m adhesive tapes hard to peel, please press back and then press again..
  • What You Get – pop-tech 9 Pack 35mm replacement stickers clear and 4 Pack alcohol prep pads. Our worry-free 18-month warranty guarantee and friendly customer service. NO-RISK PURCHASE! UNCONDITIONAL 30-DAY MONEY-BACK GUARANTEE. If you’re unsatisfied with this item for any reason, we’ll immediately refund your purchase price..
Check Stock

For Nutribullet RX Replacement Parts for Nutri Bullet 1700w RX Mushroom Head Equipment for Nutribullet Drive Socket Blender Drive Socket for Blender Juicer Mixer Base Gear Replacement Accessories

  • ✅ IDEAL REPLACEMENT - Want Mixer Blade Replacement that matches the original, the nutribullet rx drive socket is ideal replacement for Nutri bullet....
  • ✅ ADOPT QUALITY MATERIAL - The nutribullet rx replacement parts is made of high-quality metal + plastic material, durable and can service for long....
  • ✅ EASY TO INSTALL - Direct replacement for a proper fit and easy installation, and the drive socket kit for nutribullet is very easy operate and....
  • ✅ PACKING INCLUDES - 1 x Drive Socket, commercial grade replacement drive socket kit..
  • ✅ BUY WITH CONFIDENCE - We offer 3 MONTHS WARRANTY, true worry-free shopping experience. If the blender replacement parts ever fails on your blender....
Check Stock

TOPINCN Drive Socket Kit Transmission Shaft Kit for Nutri Bullet Blender RX 1700W Replacement Parts Set

  • ¡¾PERFECT FIT¡¿Commercial grade replacement drive socket kit. Great for Nutri 1700w RX..
  • ¡¾EASY TO INSTALL¡¿No other tools needed, convenient for you to use, save your replacement time , Very easy to install and operate. Suitable for....
  • ¡¾POWERFUL FUNCTION¡¿Powerful and precise drive shaft design, maintain high-speed rotation without jamming, and extract fruits and vegetables into....
  • ¡¾PREMIUM QUALITY¡¿The drive socket is made of high quality plastic and metal materials, durable, anti-corrision and can use for long time, and....
Check Stock

3 Prong Light Socket Adapter, E26 Light Bulb Outlet Adapter, Polarized Light Socket to Plug Adapter, White Light Bulb to 2/3 Prong Outlet Plug Splitter Converter for Garage Porch CCTV Camera (1 Piece)

  • 3 Prong Design Light Socket to Plug Adapter: the light socket adapter is 3 prong socket design, 3 prong socket can be applied in both 3 plug and 2 plug, a wider range of applications.
  • Additional 2 Socket Outlets: the light socket adapter splits your standard socket to 2 polarized outlet and 1 bulb socket for your convenience, good for garage, workshop, basement, porch, patio, Halloween Christmas Outdoor Lights, security cameras.
  • Electrical Ratings: E26/E27 socket outlet adapter voltage range: 0-125VAC, wattage: 1250W.
  • This light bulb adapter is not suitable for use in wet locations.
  • Stable Material: the light bulb socket adapters are made of flame retardant PBT material, heat resistant and long lasting, this light socket plug attached with US standard.
  • Easy to Install: you just need to turn off the fixture, remove the existing bulb, and screw the light socket plug adapter into the light socket.
Check Stock