Top E9steering Wheel Removal Reviews

ABN Steering Wheel Lock Plate Removal Tool

  • Steering Wheel Lock Plate Removal Tool. Designed to depress lock plate and remove steering wheel lock plate.
  • Designed for use on air bagged equipped vehicles.
  • Includes 9/16" x 18 and M14 x 1.55MM adapters.
  • Allows for the removal and install on steering wheel lock plate.
Check Stock

ABN Automotive Car Steering Wheel Puller Compressor Remover Set – Vehicle Steering Wheel Lock Plate Removal Tool Kit

  • EFFORTLESSLY REMOVE STEERING WHEELS: Use the ABN | Steering Wheel Removal Tool Set to apply equal pressure so you can safely remove steering wheels.
  • This universal steering wheel puller tool kit includes a steering lock plate remover in order to remove and replace the bearing in the steering column.
  • VARIOUS APPLICATIONS: For most American domestic and import cars and light trucks.
  • Remove steering wheels with or without a telescoping tilt or tilt steering columns (first remove the horn cover plate and the steering wheel nut when applicable).
  • Compresses locking plate spring to allow removal of retaining clip.
  • Allows access to turn signal switch and SIR modules on current GM vehicles.
  • Also allows you to pull old GM steering wheels to service the ignition lock cylinder for locksmith needs.
  • BUILT TO LAST: When used properly, this steering wheel puller kit will not cause any bending or spreading.
  • Each piece in this steering wheel kit is constructed from steel with various finishes for maximum strength and longevity that resists rust and corrosion.
  • We recommend putting a drop of oil (not included) on the washer that goes between the nut and the locking plate tool when compressing the steering wheel locking plate.
  • EASY STORAGE: Heavy-duty 12.6” x 2.25”....
Check Stock

Dynabrade 52712 Diameter Right Angle Depressed Center Wheel Grinder, 2-Inch 51mm

  • Depressed Center Wheel Grinder, for fast weld and stock removal, rust and scale removal, heavy deburring.
  • 2" Diameter, Right Angle, .4 hp, Rear Exhaust. 20,000 RPM.
  • Includes 90999 Depressed Center Wheel (24 grit), 2" diameter with 3/8" center hole, guard and wheel flange set also included.
Check Stock

Dynabrade 52705 Right Angle Depressed Center Wheel Grinder, 3-Inch 76mm Diameter

  • Depressed Center Wheel Grinder, for fast weld and stock removal, rust and scale removal, heavy deburring.
  • 3" Diameter, Right Angle, .4 hp, Rear Exhaust, 15,000 RPM.
  • Accepts optional 3" diameter Type 27 Reinforced Depressed Center Wheel, with 3/8" center hole (wheel width of 1/8" to 1/4").
Check Stock

Dynabrade 50302 4-Inch Right Angle Depressed Center Wheel Grinder

  • Depressed Center Wheel Grinder, for fast weld and stock removal, rust and scale removal, heavy deburring.
  • 4-Inch Diameter, Right Angle, 1 hp, Rear Exhaust, 12,000 RPM.
  • Accepts optional 4-Inch diameter Type 27 Depressed Center Wheel, with 5/8-Inch center hole (wheel width of 1/8-Inch to 1/4-Inch).
  • Package dimensions:10.25"L x 16.5"W x 3.0"H.
Check Stock

A ABIGAIL Steering Wheel Lock Plate Removal Remover Tool

  • 【High Quality】A ABIGAIL Steering Wheel Lock Plate is made made of premium quality materials which is rust and corrosion resistant. It gives the....
  • 【Function】Steering Wheel Lock Plate Removal Tool. Designed to depress lock plate and remove steering wheel lock plate. Designed for use on air....
  • 【Application】For depressing lock plates on GM and Chrysler vehicles, allows removal of round wire snap ring that retains lock plate..
  • 【Size】Reversible adapter includes 9/16"-18and M14-1.5 threads..
  • 【Service】100% satisfaction guarantee, If you have any issues with the Steering Wheel Lock Plate Remover, simply contact customer service for....
Check Stock

Kauplus Universal Hub Puller Universal Wheel Hub and Drum Puller Set

  • Adjustable sliding arms make wheel-hub removal quick, easy, and damage free wheel hub removal, won't distort wheel lugs.
  • 360 degree disc for sliding arm attachment mobility fits almost every vehicle.
  • Includes striking wrench and puller screw.
  • Durable forged constructed from alloy steel.
  • Maximum bolt circle of 7-1/2 inches (190mm).
Check Stock

FPPO 7PCS Stainless Steel Wire Wheel Brush, Coarse Crimped Cup Brush and End Brush Kit

  • These wire wheel brushes are made of stainless steel coarse wire and will not rust.Wire Diameter 0.0118 inch..
  • 1/4" shank fits all electric cordless drills and grinders,4500 Max RPM.
  • Versatile kit & Commonly used for: Rust removal, Paint removal, Deburring sharp edges, Edge Blending etc.
  • Stainless steel wire brush set designed for easy access into narrow holes and confined areas.Different sizes and shapes for different use..
  • Package Included: 1Pcs x 1.5" wire wheel brush,1Pcs x 2" wire wheel brush,1Pcs x 2.5"wire wheel brush,1Pcs x 3"wire wheel brush.
  • 1Pcs x 2"wire Cup Brush,1Pcs x 5/8"end Brush,1Pcs x 0.4"end Brush.
Check Stock

POWERTEC 15521 Aluminum Oxide Grinding Wheel 80 Grit 8 x 1 with 5/8 Arbor

  • INCLUDES: 8” Aluminum Oxide Grinding Wheel w/ 36 grit.
  • FUNCTION: This wheel works on carbon steel and tool steel (NOT including tungsten carbide, cemented carbide & ceramic tool), making it ideal for tool grinding, smoothing blades and metal working.
  • APPLICATIONS: Works exceptionally well on tools like drills, mills or disposable tips for burring, grinding, stock removal, blending, rust removal, cleaning and finishing.
  • QUALITY SPECS: This aluminum oxide wheel measures 8 inches in diameter, 1” in thickness, comes with a 5/8” arbor hole size, and possesses a 3600 maximum RPM.
  • COMPATIBILITY: Abrasive wheel is designed to fit most 8-inch bench grinder machines.
Check Stock

Dynabrade 50303 4-1/2-Inch-5 Inch Vertical Depressed Center Wheel Grinder

  • Depressed Center Wheel Grinder, for fast weld and stock removal, rust and scale removal, heavy deburring.
  • 4-1/2-Inch- 5-Inch Diameter, Vertical, 12 hp, Side Exhaust, 12,000 RPM.
  • Accepts optional Type 27 Depressed Center Wheel in diameters of 4-1/2-Inch and 5-Inch, with 7/8-Inch center hole (wheel width of 1/8-Inch to 1/4-Inch).
  • Package dimensions:10.25"L x 8.25"W x 6.75"H.
Check Stock

DEWALT Angle Grinder Tool, 4-1/2-Inch (DWE402W) , Black

  • 11 Amp AC/DC 11,000 RPM motor designed for faster material removal and higher overload protection.
  • Dust Ejection System provides durability by ejecting damaging dust and debris particles that enter the tool through the air intake vents.
  • Quick-Change Wheel release allows tool free wheel removal without the need for a wrench.
  • One-Touch Guard allows for 360 degree rotation of the guard with a single action.
  • Matching wheel flanges allow the use of common accessories.
Check Stock

Dynabrade 50340 4-1/2-Inch-5 Inch Pistol Grip Depressed Center Wheel Grinder

  • Depressed Center Wheel Grinder, for fast weld and stock removal, rust and scale removal, heavy deburring.
  • 4-1/2-Inch- 5-Inch Diameter, Pistol Grip, 7 hp, Rear Exhaust, 11,000 RPM.
  • Accepts optional Type 27 Depressed Center Wheel in diameters of 4-1/2-Inch and 5-Inch, with 7/8-Inch center hole (Wheel width of 1/8-Inch to 1/4-Inch).
  • Package dimensions:10.0"L x 8.25"W x 6.75"H.
Check Stock

Dynabrade 52711 2\ (51mm) Dia. Right Angle Depressed Center Wheel Grinder.4 hp, 15,000 rpm, Geared, Rear Exhaust, 3/8\-24 Spindle Thread

  • Depressed Center Wheel Grinder, for fast weld and stock removal, rust and scale removal, plus heavy deburring.
  • 2" Diameter, Right Angle, .4 hp, Rear Exhaust. 15,000 RPM.
  • Includes 90999 Depressed Center Wheel (24 grit), 2" diameter with 3/8" center hole. Guard and wheel flange set also included.
  • 2" (51mm) Dia. Right Angle Depressed Center Wheel Grinder, .4 hp, 15,000 rpm, Geared, Rear Exhaust, 3/8"-24 Spindle Thread.
Check Stock