ANLEON S2R Receiver 561-568MHz
- Radio frequency： 561-568MHz. 6 selectable UHF channels.
- Use any number of Receivers on the same frequency.
- Dynamic expansion circuitry for high S/N ratio.
Top Dynamic Receivers Reviews
ANLEON S2/receiver 561-568Mhz
- Dynamic expansion circuitry for high S/N ratio.
- Complex anti-interference circuit for using 6 sets at the same time without mutual.
- It can be expanded by adding an unlimited number of additional receivers.
ANLEON S2 Receiver (1 Receiver)
- Dynamic expansion circuitry for high S/N ratio.
- Complex anti-interference circuit for using 6 sets at the same time without mutual.
- It can be expanded by adding an unlimited number of additional receivers.
Klipsch Reference R-112SW Subwoofer, Black
- 12-inch spun copper Cerametallic woofer. All-digital amplifier delivers 600 watts of dynamic power.
- Front-firing slot port with exclusive internal flare technology.
- L/R line-level/LFE RCA inputs for compatibility with most receivers. Brushed black polymer veneer cabinet with satin painted plinth.
- For a simple wireless connection, add an optional Klipsch WA-2 Wireless Subwoofer Kit.
Taidacent AD8015 Wideband/Differential Output Transimpedance Amplifier Module Single-Ended to Differential 240M Bandwidth 155Mbps Data Rate
- The AD8015 is a wide bandwidth, single supply transimpedance amplifier optimized for use in a fiber optic receiver circuit. It is a complete, single chip solution for converting photodiode current into a differential voltage output..
- The 240 MHz bandwidth enables AD8015 application in FDDI receivers and SONET/SDH receivers with data rates up to 155 Mbps. This high bandwidth supports data rates beyond 300 Mbps. The differential outputs drive ECL directly, or can drive a comparator/ fiber optic post amplifier..
- In addition to fiber optic applications, this low cost, silicon alternative to GaAs-based transimpedance amplifiers is ideal for systems requiring a wide dynamic range preamplifier or singleended to differential conversion..
- Application: Fiber Receiver: SONET/SDH, FDDI, Fibre Channel Stable High Capacitance Detector.
Klipsch RP-280F Floorstanding Speaker - Ebony (Each)
- ...ough to fill any small to medium sized room.
- Product 2: CREATE A FULL-FLEDGED 5.1 HOME THEATER SETUP with the complete range of T-series speakers from Polk with two T50 Tower Speakers, one T30 Center Channel, two T15 Bookshelf speakers and a subwoofer.
- Product 2: Polk speakers are COMPATIBLE WITH MOST HOME THEATER AV RECEIVERS giving you many setup arrangement options - in single or multi-room with 2.0, 2.1, 3.1 systems or an immersive 5.1, 7.1 or 9.1 setup.
Kenwood Excelon DMX957XR 6.8 Touch Panel Digital Multimedia Receiver Bluetooth HD Radio| High Definition | Apple CarPlay Android Auto | Plus Kenwood CMOS-740HD 1280x720p High Definition Rear Camera
- Apple CarPlay is a safer way to use your iPhone in the car. Simply talk to Siri or touch the receiver’s display to get directions from Apple Maps,....
- Android Auto was designed with safety in mind, helping you to minimize distractions and stay focused on the road. KENWOOD’s multimedia receivers....
- To enable a smarter driving experience, receivers featuring 4 camera inputs allow for the utmost in convenience, flexibility, and safety. With 4....
- High Definition View - Displaying the image in true 1280 x 720 (720P) High Definition..
- High Dynamic Range - HDR helps to reduce “blown out highlights” and “crushed blacks” and ensure clear images in challenging environments,....
Dpg-200 Vacuum Transducer with
- -10dBm LO Power Consumption: Provides +24dBm third order intercept point, can achieve -10dBm LO power consumption, without high power LO drivers, there are no corresponding shielding and isolation problems, can improve system performance and reduce costs.
- Single Power Supply: The mixer module is designed to be powered by a single power supply, and the RF, IF and LO ports have DC isolation capacitors for easy use.
- 10.3dB SSB Noise Figure at 70MHz: With the output amplifier and optimal source impedance of this mixer module, the SSB noise figure is 10.3dB at 70MHz. There is no insertion loss, no external duplexer, and no passive termination.
- Low Distortion and Wide Dynamic Range: AD831 is a low distortion, wide dynamic range, single chip mixer, very practical.
- Wide Application: Suitable for applications such as RF‑IF down conversion in HF and VHF receivers, second mixer in base stations, DC baseband conversion, quadrature modulation and demodulation, and Doppler shift detection in imaging.
Klipsch R-115SW Subwoofer,Brushed Black Polymer Veneer
- Low pass crossover and variabole phase control allows you to tune the subwoofer to your Klipsch speakers and to your room.
- All-digital amplifier delivers 800 watts of dynamic power.
- Front-firing slot port with exclusive internal flare technology..
- L/R line-level/LFE RCA inputs for compatibility with most receivers.
- For a simple wireless connection, add an optional Klipsch WA-2 Wireless Subwoofer Kit.
Polk Audio PSW108 Sound Floor Standing Subwoofer, 100W Black & Polk Audio T30 Shelf Mount Speaker, Black
- ...ough to fill any small to medium sized room.
- Product 2: CREATE A FULL-FLEDGED 5.1 HOME THEATER SETUP with the complete range of T-series speakers from Polk with two T50 Tower Speakers, one T30 Center Channel, two T15 Bookshelf speakers and a subwoofer.
- Product 2: Polk speakers are COMPATIBLE WITH MOST HOME THEATER AV RECEIVERS giving you many setup arrangement options - in single or multi-room with 2.0, 2.1, 3.1 systems or an immersive 5.1, 7.1 or 9.1 setup.
Polk Audio PSW108 Sound Floor Standing Subwoofer, 100W Black & Polk Audio T15 Wall Mount Speakers, Black
- ...ough to fill any small to medium sized room.
- Product 2: CREATE A FULL-FLEDGED 5.1 HOME THEATER SETUP with the complete range of T-series speakers from Polk with two T50 Tower Speakers, one T30 Center Channel, two T15 Bookshelf speakers and a subwoofer.
- Product 2: Polk speakers are COMPATIBLE WITH MOST HOME THEATER AV RECEIVERS giving you many setup arrangement options - in single or multi-room with 2.0, 2.1, 3.1 systems or an immersive 5.1, 7.1 or 9.1 setup.
2902832, Frequency transducer, F Input: 0.002Hz-20kHz, Out: V/I, Screw Conn, Mini MCR-SL-F-UI-NC
- -10dBm LO Power Consumption: Provides +24dBm third order intercept point, can achieve -10dBm LO power consumption, without high power LO drivers, there are no corresponding shielding and isolation problems, can improve system performance and reduce costs.
- Wide Application: Suitable for applications such as RF‑IF down conversion in HF and VHF receivers, second mixer in base stations, DC baseband conversion, quadrature modulation and demodulation, and Doppler detection in imaging.
- 10.3dB SSB Noise Figure at 70MHz: With the output amplifier and optimal source impedance of this mixer module, the SSB noise figure is 10.3dB at 70MHz. There is no insertion loss, no external duplexer, and no passive termination.
- Single Power Supply: The mixer module is designed to be powered by a single power supply, and the RF, IF and LO ports have DC isolation capacitors for easy use.
- Low Distortion and Wide Dynamic Range: AD831 is a low distortion, wide dynamic range, single chip mixer, very practical.
Mixer Module, 0.1‑500MHz Conversion Board High Frequency Transducer -10dBm for HF VHF Receiver for Quadrature Modulation for Base Station
- -10dBm LO Power Consumption: Provides +24dBm third order intercept point, can achieve -10dBm LO power consumption, without high power LO drivers, there are no corresponding shielding and isolation problems, can improve system performance and reduce costs.
- Wide Application: Suitable for applications such as RF‑IF down conversion in HF and VHF receivers, second mixer in base stations, DC baseband conversion, quadrature modulation and demodulation, and Doppler detection in imaging.
- Low Distortion and Wide Dynamic Range: AD831 is a low distortion, wide dynamic range, single chip mixer, very practical.
- 10.3dB SSB Noise Figure at 70MHz: With the output amplifier and optimal source impedance of this mixer module, the SSB noise figure is 10.3dB at 70MHz. There is no insertion loss, no external duplexer, and no passive termination.
- Single Power Supply: The mixer module is designed to be powered by a single power supply, and the RF, IF and LO ports have DC isolation capacitors for easy use.