Top Dynamic Focus Laser Engraver Reviews

xTool D1 36w Higher Accuracy Laser Engraver with Material Box, 5w-7.5w Laser Cutter and Engraver Machine, Support LightBurn, Laser Engraver for Wood and Metal, Vinyl, Acrylic, Paper(17'x15.98')

【Finer Details by 0.08*0.08mm Ultra-fine Compression Spot】xTools D1 is the Best DIY laser cutter and engraver machine for beginners/business starter/ hobbyists/designers/home-makers/professionals. It adopts the latest high power 5-7.5W laser module with 0.08mm ultra-fine compressed spot, cutting speed up to 10000mm/min, can cut 8mm wood board and 3mm acrylic in one pass, directly engrave uncoated stainless steel.
【Higher Accuracy Cutter and Engraver Machine】The all-steel wheel and shaft and synchronous belt enable motion accuracy of up to 0.01 mm and repeatable positioning accuracy of less than 0.02 mm, allowing the xTool D1 laser engraving machine to engrave and cut all details of design drawings 1-to-1 with high silence throughout. It maintains a perfect engraving effect even after long times use.
【All in One Kit】These xTool D1 kit comes with the xTool D1 laser cutter and engraver machine, rotary attachment and laser material Box. With a rotary attachment, xTool D1 can engrave diameter cylinders as small as 3mm. The laser material box include 10 kinds of popular materials, including metal, wood, rubber, etc. You can start your creation quickly with xTool D1 Rotary attachment and Materail kit.
【Wide Compatibility and Multiple Connection W....

Check Stock

Tool Engraving Machine On Off 01 Industry Sound, Sounds, Effect, Effects [Clean]

【Double Compression Beam Technology to Achieve True 10w Output Power】A10 pro laser cutter and engraver machine, With 50W Machine Power, 10W Laser Module Output Power. Fixed Focus Compressed Spot, spot smaller and the energy more concentrated, and more refined engraving products..
【Support offline engraving】The A10 pro 50W laser engraver is equipped with a terminal control panel, which supports offline engraving, so that you can engrave anywhere, anytime without the restriction of a computer..
【Perfectly compatible system】The laser engraving machine can be compatible with LaserGRBL (free, support Windows) or LightBurn (paid, support Windows, Mac OS and Linux). Engraving file format support: SVG, NC, DXF, BMP, JPG, PNG, etc..
【Assembly is quite easy】Everything is neatly packaged and the smaller pieces are pre-separated into steps that match the instructions.Each assembly step has its own separate package of fittings used in that step. all parts are marked with steps no there is no confusions. The entire setup was about 30 minutes..
【Quality Assurance and After - Sale Service】We have a professional customer service team. We provide the customers a year warranty , parts replacement and permanent technical support. Your concerns are a....

Check Stock

SCULPFUN S9 Laser Engraver, Full-Metal CNC Laser Engraving Machine with 5.5W High Precision 0.06mm Ultra-Thin Beam Diode Laser Cutter for Wood, Leather, Acrylic, Large Engraving Area 410x420mm

【90W Effect Ultra-thin Laser Beam】Our new SCULPFUN S9 laser engraver uses the latest 5.5W laser beam shaping technology diode laser, which has an ultra-fine 0.06mm sharp laser focus. With super cutting penetration and accuracy, It can cut up to 15mm thick lightwood, 10mm black acrylic and carve ceramics, stainless steel and dark stone..
【Fast Focusing and High Accurancy】With fixed focus lens and sliding design, you only need to slide the laser and tighten the screw to complete fast focusing of SCULPFUN S9 laser engraver machine. The X and Y-axis contain precise scale lines, which is convenient for you to measure the size of engraving objects..
【Security and Protection Designs】The laser filter cover of SCULPFUN S9 laser engraving machine filters 98% of the uv light, allows you to watch the engraving without wearing goggles and prevents your pet from grabing the laser spot. There is a power switch on the machine for emergency power off. The A4 size steel pad can well protect your table from laser damage..
【Sturdy and Easy to Assemble】The all-metal structure design makes the desktop SCULPFUN S9 laser cutter more solid, steady and durable. There are reserved fixing holes on the the four feet and the body for fixing the machine and the data c....

Check Stock

LE400PRO Laser Engraver, 50W High Accuracy Laser Engraving Machine with 400x400mm Large Working Area, 5.5-6W Laser Power Engraver and Cutter for Wood, Metal, Acrylic, Leather

: LE400 Pro laser cutter and engraver adopts spot compression laser technology, and the laser focus spot is as fine as 0.08 x 0.08 mm, which makes the engraving and cutting effect very fine. The pre-assembled parts of the machine are carefully tuned to ensure the high precision of the laser's work..
: The laser engraver machine is equipped with a laser protective cover protects your eyes without wearing goggles when you are engraving wood and metal, filter UV light for 97%. The laser protective cover adopts a humanized magnetic design, which makes the assembly easier and more convenient..
: The focal length of the laser is a fixed value, no need to adjust the focus before engraving which traditional zoom lasers can not do! And the laser power of the fixed-focus laser is more stable. What's more, the design of using the knob to control the lifting of the device makes focusing more convenient and accurate..
: Full aluminum alloy modular can typically be assembled in 20 minutes. The structure makes the machine more solid, and improves the accuracy of engraving. Also equipped with a convenient power switch for easy po....

Check Stock

Atomstack A20 pro Laser Cutter and Engraver Machine by UESUIKA, 130w Diode Laser Engraving Machine with Air Assist Kits, 20W Optical Power, Easy Assembly, Eye Protection Fixed Focus Compressed Spot

...F30 pro air assist pumps, making cutting work more precise and faster.
the package comes with a terminal control panel supports offline engraving, you can carry out engraving work anytime and anywhere without being restricted by the computer.
【Upgraded Precise Laser Engraver】The upgraded Atomstack self-developed 32-bit motherboard and built-in 256-bit color scale makes the engraving work more precise, you can engrave on mental, wood, bamboo, cardboard, plastic, leather, PCB, alumina etc.
The powerful engraver machine reduces the laser focus area to 0.08*0.1mm, which's focus spot area is 1/3 of other lasers.
the wood laser engraver can take into account precision engraving and high-energy cutting at the same time.
【Easy to Install】Everything is neatly packaged and the smaller pieces are pre-separated into steps that match the instructions.Each assembly step has its own separate package of fittings used in that step. all parts are marked with steps no there is no confusions. The entire setup is about 30 minutes.
【Operational Safety】The panoramic filter glass protective cover filters 97% of ultraviolet la....

Check Stock

LaserPecker 3(Basic) Laser Engraving Machine, Fiber Laser Engraver 1064nm Cold Red Light 0.01mm Compressed Spot, 48000mm/min High Speed Handheld Fiber Laser Marking Machine for Metal Jewelry Plastic

Fiber Laser Engraver for Metal and Plastic: LaserPecker 3 laser engraver with 1064nm fiber laser for metal and plastic materials. e.g: stainless steel, gold, silver, aluminum, titanium, copper, coated metal plate.
acrylic, plastic, etc. Can be directly engraved without any preprocessing..
Much Smaller Compression Spot: LaserPecker 3 laser engraving machine adopts a 0.01mm*0.01mm ultra-fine compression spot, achieving detailed and vivid engraving images. Present pixels with 4K level perfectly..
Ultra Fast Engraving: LaserPecker 3 fiber laser marking machine with innovative galvo technology achieves high-speed engraving at 48000mm/min. Comparable Industrial-grade engraving speed brings a subversive experience..
Easy To Focus, Quick To Start: LaserPecker 3 laser engraving machine adopts dual infrared light positioning design (When the two red light spots are coincident, the focus is correct), which can accurately locate the marking position without offset and good position.
Quickly and accurately control the lifting of electric stand, can be realised easy focus on objects of different heights..
Versatile Base, Create With Easy: With the help ot the positioning plate on the base, the position of the engraving objects can be fixed/adjusted, making batch engra....

Check Stock

Laser Engraver Cutting Module, LASER TREE 10W Output Optical Power Diode Laser Head, Double Ultra-Fine Compressed Spot Laser Cutter Module with Air Assistance, Laser Engraver for Wood and Metal, 24V

...s steel up to 300mm/s at a 45mm focus length. And laser cutter module ability to cut through 8mm thickness plywood by one pass at speed of 1.5mm/s. Excellent engraving speed & remarkable cutting ability for a better cutting/engraving experience..
AIR ASSIST & EYE PROTECTION MODES – AIR ASSIST Mode: LT-80W-AA laser engraver module is equipped with an air assist metal nozzle that can make material edges cleaner when cutting/engraving. That will greatly reduce burned marks and bring you an excellent cutting experience. (Note: Air-assisted pump not included) Mode 2: This laser module comes with a detachable eye protection cover. When engraving with this laser head, you could use this protective cover that can effectively filter blue light..
ULTRA-LONG SERVICE TIME – The main part is made of aluminum alloy to make the module structure more solid. And this laser cutter engraver module built-in fan cooling system, a fan speed of 10000 rpm, and cools efficiently to prolong service life. Original diode, high quality, lifetime up to 20,000 hours. Engraving module kit protective lens can have no fingerprints, it will affect the cutting ability, and the performance of the module decreases..
SPECIFIC PARAMETER DETAILS – Fixed focus: 45mm.

Check Stock

ENJOYWOOD Laser Engraver, Desktop and Handheld 2 in 1 Laser Engraving Machine, Fiber Marking Machine for Metal Plastic Leather, 0.001mm/4K Engraving Accuracy, 0.01mm Compressed Laser spot.

【High Power Laser Engraver Machine】 100W whole machine electrical power, the pulse peak optical power can reach 20000W.Upgraded compressed spot technology.The ultra-fine laser focus area is reduced to 0.02mm in diameter, and the minimum markable character is about 0.06mm*0.15mm (tested with focusing film)..
【Fine Engraving】0.01mm ultra-long and ultra-fine end-pumped infrared laser enables every detail of engraving to be presented, perfectly presenting 4K-level high pixels. Precise positioning,ENJOYWOOD M4 adopts dual-infrared light positioning design, which can accurately locate the marking position without offset..
【Desktop and Handheld 2 in 1 Laser Engraver】 M4 adopts a highly integrated design, and the core components are lightweight, which brings more usage scenarios. It can be hand-held to mark on non-horizontal surfaces, walls, and facades. Start your creation anytime, anywhere..
【Industrial Galvanometer Technology】 M4 marking machine uses 1064nm wavelength infrared light ....

Check Stock

ENJOYWOOD CEL-E10 Laser Engraver, 50W Laser Engraving Cutting Machine,10-15W Laser Output Power Laser Engraving Machine,0.06 * 0.06mm Double Compressed Spot Laser Engraver for Wood and Metal Etc

Double Compression Spot Coupling Technology: laser engraver laser power is 10-15W, ultra fine compressed laser spot is reduced to 0.06*0.06mm, Other 10W Machine laser focus area is 0.06*0.08mm. The smaller the laser spot, the greater the energy of the laser. Laser could control laser beam more accurately to 0.01mm. Cutting and engrving more precision..
Fast Engraving and Cutting: The laser engraving machine burning Temperature is up to 1200℃. Engraving & cutting speed is 300% higher than that of ordinary models.Engraving speed up to 11,000mm/min.ENJOYWOOD laser engraver with 50mm focal length, Cutting depth increased by more than 20%,Other 10W Machine With 30mm focal length..
Vivid Colors Engraving: Power 10-15W optical power can oxidize the metal surface. Oxidized metals exhibit rich colors.By controlling the speed, power and line spacing you can have color laser engraving..
The New Filter Panoramic Glass Eye Protection Design: Plays a very good role in protecting your eyes, filtering 97% of the ultraviolet light, you do not need to wear goggles, you can also watch laser engraving. The emergency stop button and reset switch are more convenient and safe to use.Wide Compatibility: LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10, supp....

Check Stock

Laser Engraver,WAINLUX Z3 Portable Laser Engraving Machine 0.05mm High Precision,Auto Fixed Focus Compressed Spot, Foladable Laser Engraver for Wood and Metal,Acrylic,Leather, DIY Engraving

【Upgraded Auto Focus &Lift Design】WAINLUX Z3 Laser engraver support one touch auto focus,it will also projects a preview of your image on the surface before engraving, make your work more efficiently. It is foldable design and no need to install.Your engraving work will not be limited by place and time any more since it is compact and lightweight and portable and can be power supplied via power bank..
【Faster and Higher Accuracy Engraving】Z3 laser engraving machine with 5W laser power and 0.05mm ultra-long and finer infrared laser,the max engraving speed reach 600mm/s, bring you fast and precise engraving experience and making each engraving lifelike.The fixed engraving area is 80mm*80mm.(Note:For metal,Z3 will only work on COATED METAL).
【Bottom Hollow and Rotatable Design】 Using Z3 to get more carving modes. Both of the flat and convex side of the movable board can be placed according to your needs for carving and cutting. With unique rotatable design,Z3’s rotatable Design allows you to engrave any bevel within 180°. You can also place the Z3 directly on top of large objects for accurate marking break the height and area limitations..

Check Stock

Comgrow Z1 Laser Engraver 10W Output Power, 24V Desktop 48W Laser Cutter and Engraving Machine with Eye Protection Compressed Laser Spot 0.08mm, 10000mm/min Diode Laser Cutting for Metal Wood

【DUAL Y-AXIS MOTOR】: The Y-axis of acrylic engraving machine is extremely smooth and extremely mobile. Not only provides almost unbelievable speed when engraving but also increases the stability and accuracy of the project..
【Extensive software adaptability & Multiple connection methods】：Z1 laser engraver can be compatible with various mature engraving software, LightBurn for experirenced laser user and LaserGRBL for new laser user. LaserGRBL Support Win 7 / Win 8/ Win 10/Win XP,LightBurn supports window /Mac /Linux system.And you can transfer data via Wi-Fi, USB cable, and SD card and use Z1 laser cutter and engraver machine anytime and anywhere..
【SUPPORT EXPANSION】: This device It can be upgraded with Comgrow rotary roller, perfect for engraving tumblers and cylindrical objects! It has a stable design for multiple diameters. Spacing between the two rotary axes ranges from 8mm(0.31in) to 86mm(3.9in). You can engrave angthing you want..
【quality assurance & Easy to use】The Z1 laser engraver can usually be assembled in 10-20 minutes. The new laser head comes with a focusing plate, allowing you to quickly and easily adjust the focus without any tools. In addition, we provide customers with one-year free parts replacement ....

Check Stock

Aufero Portable Laser Engraver, Mini Laser Cutter and Engraver Machine for Wood and Metal, 32-bit Motherboard LaserGRBL(LightBurn), Eye Protection Fixed-Focus, 7.1'' x 7.1'' DIY Engraving Area(LU2-2)

Pre-assembled Package: The Aufero 1 portable laser engraver comes pretty much assembled.
simply insert the laser head into its holding bracket and connect the two wires and it is going to work right out of the box.
perfect entry-level laser engraver for the beginners and hobbyists.
Advanced Firmware: Adopting advanced motherboard (32-bit MCU) for fast and precise engraving.
processes 32 instructions and supports up to 921600 baud rate.
LU2-2 fixed focus laser module has a luminous power of 1,000-1,600mw and 0.07x0.06mm focal spot, perfect for engraving high precision patterns.
Broad Compatibility: The Aufero 1 laser engraver works with mature engraving software-LaserGRBL(free), LightBurn(paid).
supports Win XP / Win 7 / Win 8 / Win 10, Mac and Linux systems.
supports BMP, JPG, PNG, JPEG, SVG file types.
works on food, MDF, paperboard, plywood, black acrylic, leather, powder-coated metal, stone, etc.
4 Safety Protection: Built with 4 protections: active position protection, exposure duration detection and limitation, laser beam safety guard and current safety control system.
full safety protection allows you to hook on your project without any worry.
Dual Eye Protection: The Aufero 1 laser engraving machine features a protective cover that effectively fil....

Check Stock

Atomstack A5 pro Laser Cutter and Engraver Machine by UESUIKA, 40w Diode Laser Engraving Machine, 5-5.5W Optical Power, Easy Assembly, Eye Protection Fixed Focus Compressed Spot

【Get a free Laser Engraving and Cutting Materials】 Please click the "Promotion Available" button ,then click "Add both to Cart".
you will get a free Laser Engraving and Cutting Materials as you order Atomstack A5 pro laser cutter.
【Reason for Choice】The A5 pro laser engraver has a large engraving range of 15.74 x 16.1inch. 5.5W Optical output power of laser. Fixed Focus Compressed Spot, higher accuracy, and more refined engraving products. It can not only engrave but also cut 1/5" of the wood and acrylic..
【Create Your Own Logo】The A5 pro 40W laser engraver for home can meet your daily needs. It can engrave on wood, bamboo, paper, plastic, leather, PCB board, aluminum oxide, non-reflective plating and lacquered metal, ceramics. You can engrave your own logo for your favorite items..
【Assembly is quite easy】Everything is neatly packaged and the smaller pieces are pre-separated into steps that match the instructions.Each assembly step has its own separate package of fittings used in that step. all parts are marked with steps no there is no confusions. The entire setup was about 30 minutes..
【Perfectly compatible system】The laser engraving machine can be compatible with LaserGRBL (free, support Windows) or LightBurn (paid, support Window....

Check Stock