Top Duralux Marine Paint Reviews

DURALUX Camouflage Paint - Duckboat Drab, 1 Gallon, Camouflage Marine Paint for Boats, ATVs, Hunting Blinds & More, Adheres to Steel, Metal, Wood, Fiberglass & Aluminum

  • CAMOUFLAGE MARINE PAINT: Get a long-lasting, ultra-low luster finish on your boat, tree stand or hunting blind with Duralux Duckboat Drab Camouflage Paint..
  • LONG-LASTING FINISH: This structure and boat paint stands up to saltwater, oil, gasoline, and the discoloration effects of harbor gasses for a long-lasting finish..
  • FOR A VARIETY OF APPLICATIONS: This oil alkyd-based camo paint adheres to steel, metal, wood, aluminum and fiberglass. It's perfect for boats, tree stands, hunting blinds, ATVs and trailers..
  • EASY TO USE: Apply 2 thin coats of Duralux Marine Paint on a prepared surface with a brush, roller, or airless sprayer. Do not paint in direct sunlight and allow each coat to dry overnight. Packaged in a 1-gallon container..
  • FOR ON-SHORE AND OFF-SHORE APPLICATIONS Duralux Marine Coatings offers a complete line of high-performance enamels, spar varnish and other coatings in a variety of colors..
Check Stock

Duralux Camouflage Paint - Duckboat Drab, 1 Quart, Camouflage Marine Paint for Boats, ATVs, Hunting Blinds & More, Adheres to Steel, Metal, Wood, Fiberglass & Aluminum

  • CAMOUFLAGE MARINE PAINT: Get a long-lasting, ultra-low luster finish on your boat, tree stand or hunting blind with Duralux Duckboat Drab Camouflage Paint..
  • LONG-LASTING FINISH: This structure and boat paint stands up to saltwater, oil, gasoline, and the discoloration effects of harbor gasses for a long-lasting finish..
  • FOR A VARIETY OF APPLICATIONS: This oil alkyd-based camo paint adheres to steel, metal, wood, aluminum and fiberglass. It's perfect for boats, tree stands, hunting blinds, ATVs and trailers..
  • EASY TO USE: Apply 2 thin coats of Duralux Marine Paint on a prepared surface with a brush, roller, or airless sprayer. Do not paint in direct sunlight and allow each coat to dry overnight. Packaged in a 1-quart container..
  • FOR ON-SHORE AND OFF-SHORE APPLICATIONS Duralux Marine Coatings offers a complete line of high-performance enamels, spar varnish and other coatings in a variety of colors..
Check Stock

DURALUX Marine Enamel, White, 1 Gallon, Topside Paint for Boats and Other Onshore or Offshore Marine Maintenance Applications, Adheres to Steel, Metal, Wood, Fiberglass & Aluminum

  • ENAMEL MARINE PAINT: Get a long-lasting, elegant white finish on your boat, bridge, or other marine structure with Duralux Marine Enamel..
  • LONG-LASTING FINISH: This marine structure and boat paint stands up to salt water, oil, gasoline, repeated washings and the discoloration effects of harbor gasses for a long-lasting finish..
  • FOR A VARIETY OF MARINE APPLICATIONS: This single-component topside enamel adheres to primed steel, metal, wood, aluminum and fiberglass – making it ideal for commercial or pleasure boats, offshore oil rigs, bridges, tanks and other structures..
Check Stock

DURALUX Marine Enamel, Cruiser Blue, 1 Gallon, Topside Paint for Boats and Other Onshore or Offshore Marine Maintenance Applications, Adheres to Steel, Metal, Wood, Fiberglass & Aluminum

  • ENAMEL MARINE PAINT: Get a long-lasting, elegant cruiser blue finish on your boat, bridge, or other marine structure with Duralux Marine Enamel..
  • LONG-LASTING FINISH: This marine structure and boat paint stands up to salt water, oil, gasoline, repeated washings and the discoloration effects of harbor gasses for a long-lasting finish..
  • FOR A VARIETY OF MARINE APPLICATIONS: This single-component topside enamel adheres to primed steel, metal, wood, aluminum and fiberglass – making it ideal for commercial or pleasure boats, offshore oil rigs, bridges, tanks and other structures..
Check Stock

Duralux Camouflage Paint - Green, 1 Gallon, Camouflage Marine Paint for Boats, ATVs, Hunting Blinds & More, Adheres to Steel, Metal, Wood, Fiberglass & Aluminum

  • CAMOUFLAGE MARINE PAINT: Get a long-lasting, ultra-low luster finish on your boat, tree stand or hunting blind with Duralux Green Camouflage Paint..
  • LONG-LASTING FINISH: This structure and boat paint stands up to saltwater, oil, gasoline, and the discoloration effects of harbor gasses for a long-lasting finish..
  • FOR A VARIETY OF APPLICATIONS: This oil alkyd-based camo paint adheres to steel, metal, wood, aluminum and fiberglass. It's perfect for boats, tree stands, hunting blinds, ATVs and trailers..
Check Stock

DURALUX Camouflage Paint - Duckboat Drab, 1 Gallon, Camouflage Marine Paint for Boats, ATVs, Hunting Blinds & More, Adheres to Steel, Metal, Wood, Fiberglass & Aluminum

  • CAMOUFLAGE MARINE PAINT: Get a long-lasting, ultra-low luster finish on your boat, tree stand or hunting blind with Duralux Duckboat Drab Camouflage Paint..
  • LONG-LASTING FINISH: This structure and boat paint stands up to saltwater, oil, gasoline, and the discoloration effects of harbor gasses for a long-lasting finish..
  • FOR A VARIETY OF APPLICATIONS: This oil alkyd-based camo paint adheres to steel, metal, wood, aluminum and fiberglass. It's perfect for boats, tree stands, hunting blinds, ATVs and trailers..
Check Stock

Dolphin Premium Marine Topside Boat Paint | Gallon | Fiberglass, Wood, Metal, Aluminum | Easy to Apply & Long Lasting (Black, Gallon)

  • ✅ MARINE TOPSIDE PAINT FOR BOATS: For use above the waterline on fiberglass, wood, metal, aluminum, gelcoat and previously painted surfaces in good condition. Choose from a variety of popular color choices..
  • ✅ EASY TO APPLY: Professional results by simply brushing, rolling or spraying. Apply 2 thin coats on a prepared surface. Don't paint in direct sunlight and allow each coat to dry overnight..
  • ✅ USED FOR VARIOUS MARINE APPLICATIONS: Commonly used on primed steel, metal, wood, aluminum and fiberglass – making it ideal for commercial or pleasure boats, bridges, tanks, offshore oil rigs and other structures..
  • ✅ HIGH GLOSS LONG-LASTING FINISH: This marine structure and boat paint is scratch & chemical resistant and stands up to salt water, oil, gasoline, repeated washings for a long-lasting finish..
  • ✅ AVAILABLE IN MANY COLORS: Our topside paint is available in a variety of colors. Dolphin Boat Paints also sells boat primer, paint thinner and boat non-slip grip paint..
Check Stock

TotalBoat Marine Topside Boat Paint Primer for Fiberglass and Wood (Gray, Quart)

  • ONE-PART MARINE PRIMER FOR BOATS provides a durable, flexible undercoat for 1-part and 2-part polyurethane and enamel marine topside paint.
  • for use above the waterline on fiberglass, wood, gelcoat and previously painted surfaces in good condition.
  • COVERS COMPLETELY IN JUST ONE COAT: High-solids primer seals the surface with 1 thin coat.
  • apply a second coat only if a higher build is needed.
  • to fill large surface imperfections use TotalBoat TotalFair epoxy fairing compound before applying Topside Primer.
  • EASY TO APPLY BY BRUSHING, ROLLING OR SPRAYING: Use a natural bristle paint brush, a 1/8 " solvent-safe foam roller, or to spray, use a 1.1mm tip.
  • boat primer is chromate-free and lead-free.
  • DRIES FAST, CURES TO A SMOOTH, HARD FINISH: Ready to sand in 60-90 minutes at 65°F.
  • marine paint primer is easy to sand, then just wipe clean and apply a topside finish such as TotalBoat Wet Edge or TotalTread marine non-skid deck paint.
  • AVAILABLE IN WHITE AND GRAY IN QUART AND GALLON SIZES. Brush/roller application - thin with TotalBoat Special Brushing Thinner 100.
  • do not apply Topside Primer thicker than recommended or it may not cure properly.
Check Stock

Louie's Backyard Cookbook: Irrisistible Island Dishes and the Best Ocean View in Key West (Roadfood Cookbook)

  • ONE-PART MARINE PRIMER FOR BOATS provides a durable, flexible undercoat for 1-part and 2-part polyurethane and enamel marine topside paint.
  • for use above the waterline on fiberglass, wood, gelcoat and previously painted surfaces in good condition.
  • COVERS COMPLETELY IN JUST ONE COAT: High-solids primer seals the surface with 1 thin coat.
  • apply a second coat only if a higher build is needed.
  • to fill large surface imperfections use TotalBoat TotalFair epoxy fairing compound before applying Topside Primer.
  • EASY TO APPLY BY BRUSHING, ROLLING OR SPRAYING: Use a natural bristle paint brush, a 1/8 " solvent-safe foam roller, or to spray, use a 1.1mm tip.
  • boat primer is chromate-free and lead-free.
  • DRIES FAST, CURES TO A SMOOTH, HARD FINISH: Ready to sand in 60-90 minutes at 65°F.
  • marine paint primer is easy to sand, then just wipe clean and apply a topside finish such as TotalBoat Wet Edge or TotalTread marine non-skid deck paint.
  • AVAILABLE IN WHITE AND GRAY IN QUART AND GALLON SIZES. Brush/roller application - thin with TotalBoat Special Brushing Thinner 100.
  • do not apply Topside Primer thicker than recommended or it may not cure properly.
Check Stock

TotalBoat Marine Topside Boat Paint Primer for Fiberglass and Wood White Gallon

  • ONE-PART MARINE PRIMER FOR BOATS provides a durable, flexible undercoat for 1-part and 2-part polyurethane and enamel marine topside paint.
  • COVERS COMPLETELY IN JUST ONE COAT: High-solids primer seals the surface with 1 thin coat.
  • apply a second coat only if a higher build is needed.
  • EASY TO APPLY BY BRUSHING, ROLLING OR SPRAYING: Use a natural bristle paint brush, a 1/8 " solvent-safe foam roller, or to spray, use a 1.1mm tip.
  • DRIES FAST, CURES TO A SMOOTH, HARD FINISH: Ready to sand in 60-90 minutes at 65°F.
  • marine paint primer is easy to sand, then just wipe clean and....
  • AVAILABLE IN WHITE AND GRAY IN QUART AND GALLON SIZES. Brush/roller application - thin with TotalBoat Special Brushing Thinner 100.
Check Stock

TotalBoat Marine Topside Boat Paint Primer for Fiberglass and Wood White Quart

  • ONE-PART MARINE PRIMER FOR BOATS provides a durable, flexible undercoat for 1-part and 2-part polyurethane and enamel marine topside paint.
  • COVERS COMPLETELY IN JUST ONE COAT: High-solids primer seals the surface with 1 thin coat.
  • apply a second coat only if a higher build is needed.
  • EASY TO APPLY BY BRUSHING, ROLLING OR SPRAYING: Use a natural bristle paint brush, a 1/8 " solvent-safe foam roller, or to spray, use a 1.1mm tip.
  • DRIES FAST, CURES TO A SMOOTH, HARD FINISH: Ready to sand in 60-90 minutes at 65°F.
  • marine paint primer is easy to sand, then just wipe clean and....
  • AVAILABLE IN WHITE AND GRAY IN QUART AND GALLON SIZES. Brush/roller application - thin with TotalBoat Special Brushing Thinner 100.
Check Stock

E/FUSING 900 Moldable Silicone Putty

  • DEVELOPED SPECIFICALLY AS A MARINE SEALANT – Stays tough and flexible for a wide range of uses above the waterline.
  • VERY VERSATILE – Works on bare and painted metal, glass, paint, fiberglass, non-oily woods, many plastics and abraded rubbers.
  • EASY TO USE – Applies right from the container and requires no mixing..
  • HELPS KEEP WATERCRAFT LOOKING SHARP – Resists temperatures and won’t turn yellow over time.
  • DESIGNED TO ENDURE MARINE ENVIRONMENTS - 3M Marine Grade Silicone Sealant is a part of a broad range of adhesive sealants uniquely formulated for the marine market. Designed for reliable sealing performance in harsh marine environments..
Check Stock

TotalBoat Underdog Marine Antifouling Bottom Paint for Fiberglass, Wood and Steel Boats (Black, Gallon)

  • ECONOMICAL ANTIFOULING BOTTOM PAINT provides excellent single-season protection.
  • copper biocide keeps barnacles and mussels from clinging to hull bottoms.
  • ideal for sailboats, power boats, fishing and work boats in all types of saltwater conditions.
  • EFFECTIVE MARINE PAINT prevents barnacles from attaching to your hull by releasing fresh biocide as water moves under the boat.
  • durable finish withstands trailering & beaching better than traditional ablative paints.
  • FOR USE ON PROPERLY PREPARED FIBERGLASS, WOOD, STEEL, AND IRON BOAT BOTTOMS.
  • because the ablative coating wears away during the season, there’s no paint buildup, which makes your bottom paint job easier next season.
  • EASY TO APPLY: Use a natural bristle brush, or a 3/16” nap or foam solvent-safe roller, or use airless or conventional spray equipment. THINNING (10%): brush/roller – TotalBoat Special Brushing Thinner 100.
  • spray equipment – TotalBoat Spray Thinner 101.
  • AVAILABLE IN GALLON SIZE IN BLACK, BLUE AND RED COLORS. Coverage: 500 sq ft per gallon.
  • this product is a marine paint intended for antifouling use on boats, applied to hulls and boat bottoms below the waterline only.
Check Stock