Top Durable Puller Tool Reviews

OEMTOOLS 27059 Pilot Bearing Puller Attachment, Pilot Bearing and Bushing Removal, Fits 5/8” x 18” or 3/4” x 16” Threaded Rods , Black

  • EASY TO USE: The slide hammer bearing puller can be used in four steps: Insert the pilot bearing puller, turn the attachment housing expanding both jaws against the pilot bearing, attach a slide hammer, and use the slide hammer to remove the bearing.
  • SAVE MONEY: Getting a pilot bearing replaced in an auto shop could cost you up to $650.
  • You can save hundreds of dollars by using this one pilot puller.
  • VARIETY OF USES: Not only can this pilot bearing tool be used as a bearing puller, but it can also be used as a bushing tool on starters and generators.
  • This pilot bearing removal tool will also fit any 5/8” x 18” or 3/4” x 16” threaded rods.
  • DURABLE: Made from steel, this bearing and bushing removal tool can withstand years of regular pilot bearing jobs.
  • This blind hole bearing puller is built to last.
  • DIMENSIONS: This pilot bearing remover is easy to store anywhere at just 10.4" x 3.4" x 1.3". The blind bearing puller is also easy to wield, weighing in at just 13.6 ounces, making it a great pilot tool.
Check Stock

Compression Sleeve Puller Tool Remove Nut & Ferrule Of Pipe 03943, Sleeve Remover For 1/2” Compression Fittings Only, Corroded & Frozen Supply Stops, Plumbing Tools Compression Ring Removal Tool

  • ...stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. No damage to the copper. Makes removing a nut and ferrule simple, and makes plumbing work simple..
  • 【Work On Corroded & Frozen】Fully machined body and screw, this ferrule puller is durable, corrosion resistant & wear resistant. Even such as the existing supply stops are severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe..
  • 【Easy & Fast Remove】1.Remove the old compression fitting or the old angle stop. 2.Put the nut of pipe to the golden threaded mouth of the puller tool to tighten the screw 3.Make sure the ferrule puller is properly aligned with the pipe, and then you are able to remove the nut and ferrule with maybe 10 turns of the handle. 4.The puller tool will automatically pull compression nut and ferrule..
  • 【Great Compression Sleeve Puller Tool】We love and take pride in our angle stop puller and we back this ferrule blaster up with lifetime service. Have the confidence that this compression ring removal tool will last, if there are any issues of this plumbing tools, just contact us and we will make it right..
Check Stock

DMDMBSR Weed Puller Tool, Stand Up Weed Puller Long Handle Removable Steel Tube and Non-Slip 4 Claw Iron Head Design

  • Weed Puller Tool, Stand Up Weed Puller Long Handle Removable Steel Tube and Non-Slip 4 Claw Iron Head Design.
Check Stock

KELEN Power Steering Pump Pulley Puller, Power Steering Pulley Puller/Installer, 12Pcs Power Steering Pulley Remover and Installer Set for Water Pump, Vacuum Pump Pulley Puller

  • Power steering pulley puller and installer kit is used for removing and installing pressed-on alternator ,power steering pump and other pulleys..
  • The pulley puller and installer kit is compatible with Late GM, Ford & Chrysler Engines,includes special adapters for GM 3.2 Quad 4 engines and Ford Modular engines..
  • Power steering pump pully puller is made of high carbon steel, long lasting and durable construction for a long service life.The power steering pulley remover and installer set is a must have kit for professional and home DIY mechanics..
  • The power steering pulley puller/installer equipped with a plastic carrying case, keep all tools well organized, allows for convenient storage and transportation..
  • We also know the power steering pump pully puller as power steering pulley puller tool,power steering pulley puller set,power steering pump pulley puller tool,power steering pulley remover installer,power steering pump pulley puller/installer,power steering pulley puller kit,power steering puller kit,pulley puller installer kit,pulley installer kit,pulley installer remover,power steering pump puller,and so on..
Check Stock

ABN 8in 3-Jaw Gear Puller – Removal Tool for Slide Gears, Pulley, and Flywheel

  • [Durable 3 Jaw Puller Tool]: Use the ABN 8-Inch Small Gear Puller 3 Jaw Small Engine Flywheel Puller to remove most shift-fitted parts with ease.
  • 3 prong gear puller evenly distributes pulling force to protect your gears.
  • [Damage-Free Removal]: Manual bearing puller removes slide gears, pulleys, bearings, bushings, and flywheels without causing damage to your application.
  • [Multi-Position Design]: Universal pulley puller tool has reversible jaws that switch from inside to outside grip in short or long reach lengths for maximum versatility.
  • Reach measures in 4 lengths from 6.25-inches to 8-inches (15.9 to 20.3cm).
  • [Built to Last]: Forged and hardened steel provide maximum strength and longevity to the gear puller sets.
  • Slim puller jaws allow for easy gripping and access to tight spaces while the steel center bolt and acme-thread offer smooth operation.
  • [Works with your Existing Tools]: 9.5-inch (241.3mm) tall hex head screw fits any 19mm hand wrench, ratchet, or combination spanner for gear and bearing removal.
Check Stock

Compression Sleeve Puller Tool Remove Ferrule & Nut Of Pipe, Ferrule Puller For 1/2” Copper Water Compression Sleeve & 1/2-Inch Copper Tubing, Plumbing Tools Compression Ring Removal Tool

  • ...mpression sleeve from the pipe. Make sure the ferrule puller is properly aligned with the pipe, and then you are able to remove the nut and ferrule with maybe 10 turns of the handle. Easy and fast solve the problem of compression valves failing with small leaks. Fully machined body and screw, this ferrule puller is durable, corrosion resistant & wear resistant..
  • 【2 Ways To Remove】Remove the old compression fitting or the old angle stop.WAY 1: ONLY REMOVE THE FERRULE—Let the ferrule in between the red notched end of the tool (notched clamping ferrule). WAY 2: BOTH REMOVE THE COMPRESSION NUT AND FERRULE—Place red notched end of tool behind compression nut. And then both way1 or way2 all need to: Engage the silver head end in tubing. Hold tool firmly while turning the t-bar handle, the puller tool will automatically pull compression nut and ferrule..
  • 【Gteat Compression Sleeve Puller Tool】We love and take pride in our angle stop puller and we back this ferrule blaster up with lifetime service. Have the confidence that this compression ring removal tool will last, if there are any issues of this plumbing tools, just contact us and we will make it right..
Check Stock

DASBET 16PCS Blind Inner Bearing Puller Hole Remover Extractor Set Slide Hammer Tool Kit

  • ...ening the nut to slowly pull the bearing out of place..
  • 【Usage】This slide bearing removal tool is designed to quickly finish the job without damaging the removed parts or the tool. This small bearing puller tool is ideal for professionals and do-it-yourselfers..
  • 【Sturdy Construction】: Constructed of a strong, durable carbon steel, the bearing extractor tool is sure to pull even the toughest wheel bearing and bushings from tight positions. This blind bearing puller set has a long steel rod and a T-bar handle. The flared ends of the shop hammer weight provides a sturdy grip. The forged hardened steel and rust-proof finish help to increase pulling strength and force while also providing longevity for the tool..
  • 【Easy Storage】Comes in a blow molded case for safe & easy transport and storage..
Check Stock

GXL Carrier Pinion Bearing Puller for Dana 30, 40, 60, 70, Ford 9'' inch Clamshell Design.

  • Double heat treated for extreme strength.
  • Bearing Puller with durable steel and Works with impact Gun for easy and safe use..
  • Small(yellow) and Medium(Black) Clamshells with Bearing Puller Tool Stand and One Screw Assembly..
Check Stock

Shankly Harmonic Balancer Puller, Crankshaft Pulley Removal Tool or Harmonic Pulley Puller Tool, Steering Wheel Puller Kit with Heavy-Duty Case for Pulley Puller and Installer Kit

  • ✅ HARMONIC BALANCER PULLER SET: This pulley puller, and other tools are designed to handle a variety of jobs, giving the user multiple uses for a single toolset and allowing for the easy and simple removal of steering wheels and crankshaft pulleys.
  • ✅ TIME SAVER: This gear puller tool or harmonic puller eliminates the need for a technician to go through the time-consuming process of first removing the radiator before being able to remove the pulley.
  • ✅ STRONG JAW DESIGN: This harmonic balancer puller jaw design or (tools flywheel puller tool set) provides greater durability, clevis pins allow jaws to be quickly removed and installed, allowing the user to finish the job quickly and effectively.
  • ✅ IDEAL FOR TIGHT SPACES: Shankly's pully puller tool or gear puller is designed to extract damper pulleys in tight engine compartments, the compact design provides more room to work than many harmonic balancer puller tool.
  • ✅ HEAVY-DUTY CASE: This harmonic balancer puller/installer set or puller set sits neatly in a tidy blow molded case with a built-in handle and slide latches making it simple and easy to move and store this tool.
Check Stock

EEIEER Weed Puller Adjustable, 40’’ Stand-up Manual Weeders with 4 Claws, Efficient Weeding Tool for Lawn Yard Garden Patio

  • ...stable Weed Puller】Our 39.4‘’(1m)stand up weeding tool is suitable for most people's height, and the handle component are adjustable from 0~90°. You can choose a most comfortable angle to work. And the adjustable folding foot plate is also suitable for the slope, which is labor saving and time-saving..
  • 【Durable & Practical】The weed removal tool is made of premium material and treated with black coat, which is durable and anti-rust. The plastic handle on the head is lighter and also provides a more comfortable feel. This weed puller combines durability and practicality, which can assure minimum fatigue..
  • 【Simple to Use】Simply push the weed puller into the roots of weeds, step on the cast steel claw and penetrates deep, then you will grab the weeds and pull them out easily. This weeder tool will remove crabgrass, thistle, plantain, clover, burdock, taproot effectively, is a perfect gift for those who loves working in the yard!.
Check Stock

BESTOOL Gimbal Bearing Puller | Mercruiser Alignment Tool | OMC Heavy Duty Bearing Puller for OMC/Mercruiser Alpha/Alpha one/Bravo

  • STURDY & DURABLE:This puller alignment tool is made of solid pieces of steel. It can be a lifetime tool that will last longer..
  • WEAR PREVENTION:This gimbal bearing tool supports proper alignment that prevents wear on the bearing, drive, and coupler..
  • ALIGNMENT CHECK:Our bearing installer puller can be used to check engine coupler alignment with the gimbal bearing and drive..
  • EASY TO USE:After assembling, the seal bellow expander tool works just as well as the one-piece tools, which can save space in this way..
  • VARIOUS APPLICATION: This GIMBAL bearing puller tool will remove bearings on Mercruisers, OMC, and Cobra Bell Housings..
Check Stock

Keyboard Lube Switch Puller Kits 4PCS Lube Station Keycap Puller Remover Mechanical Keyboard Key Switch Stem Holder Compatible Gateron Kailh MX Switches Keyboard Cleaner Clean Kits 4 Prong Tool Puller

  • ...l parts(like springs or IC). The switch extractor can be used as IC extractor or chip extractor. It can be a good gift for electronics enthusiast.
  • 【Special Design】The key cap puller in the kits is made by bending a steel wire, with strong integration and firmness. The 4 Prong Tool is made of metal, which is very durable and strong. The surface is frosted and specially added with anti-skid design. The switch puller is made of PVC and metal, which makes the holding part soft and the working area durable.
  • 【Note】Switch extractors are only available for hot swappable keyboards. Multiple use of the switch puller and incorrect use may damage or scratch your switch. There may be creases on the switch puller, which is caused by the transportation process. This is a normal phenomenon and will not affect the normal use. The lube pen is just a writing brush. It can lubricate perfectly, but its brush head is too small for cleaning.
Check Stock

Ejoyous Pneumatic Air Suction Dent Puller Vacuum Slide Hammer Auto Body Dent Puller Repair Suction Cup Tool Paintless Repair Remover Dent Repair Remover

  • ... 【Protects The Original Paint】: No need to weld or drill the car for this slide hammer paintless dent repair tool.
  • Paintless dent repair kit pulls dents out without harming the original paint, without harming your body.
  • 【High-grade And Durable Material】: The heavy pneumatic sag body dent removal tool is made of galvanized steel material, which has stronger toughness, is not easy to break, and can adapt to more different dents.
  • Rubber front, it is easy to pull the dent from the panel, the high quality of the dent repair, durable and long life.
  • 【Time And Cost Saving Repair Kit】: This dent puller kit is perfect for repairing dents on cars, trucks, vehicles, etc. The heavy air pneumatic dent puller is a professional and effective tool for shops or DIY markets.
  • Moreover, compared Repair kits can save you a lot of money, our tool kit can help you repair your car many times.
  • 【Reliable Service】: Fast delivery from the United States, you will receive the car paintless dent puller within 3-7 days.
  • If you have any questions, you can contact us at any time, we will quickly help you solve ....
Check Stock