Top Ductile gray Iron Reviews

Wilton 450P Multi-Purpose Bench Vise, 4-1/2' Jaw Width, 4' Jaw Opening (28844)

  • 360° ROTATING HEAD: Clamp materials at any angle..
  • QUICK SETUP: Indexed at 30° increments..
  • VERTICAL HOLDING: V-jaw easily holds round stock vertically..
  • LARGE ANVIL WORK SURFACE: For forming and shaping materials..
  • BUILT-IN PIPE JAWS: Holds 1/4" to 1-11/16" sizes..
  • ULTIMATE DURABILITY: Body and movable jaws are 30,000 PSI gray cast iron, and the base is 60,000 PSI ductile iron..
Check Stock

Wilton 1765XC Tradesman Bench Vise 6-1/2 Jaw Width 6 Jaw Opening 28842

  • ENCLOSED DESIGN: Keeps lubrication in and contaminants out, for a lifetime of smooth operation..
  • LARGE ANVIL: Designed to take a beating while forming and shaping materials..
  • STURDY CONSTRUCTION: 60,000 PSI ductile iron body is virtually indestructible, with 2X the strength of gray cast iron..
  • IDEAL POSITIONING: 360° swivel base with double lockdowns..
  • REVERSIBLE JAW INSERTS: Serrated on one side for extra grip, and smooth on the other side to prevent marring on softer surfaces..
Check Stock

Wilton 1755XC Tradesman Bench Vise, 5-1/2' Jaw Width, 5' Jaw Opening (28841)

  • ENCLOSED DESIGN: Keeps lubrication in and contaminants out, for a lifetime of smooth operation..
  • LARGE ANVIL: Designed to take a beating while forming and shaping materials..
  • STURDY CONSTRUCTION: 60,000 PSI ductile iron body is virtually indestructible, with 2X the strength of gray cast iron..
  • IDEAL POSITIONING: 360° swivel base with double lockdowns..
  • REVERSIBLE JAW INSERTS: Serrated on one side for extra grip, and smooth on the other side to prevent marring on softer surfaces..
Check Stock

Martin SDS 2 Quick Disconnect Bushing, Ductile Iron, Inch, 2\ Bore, 2.187\ OD, 1.37\ Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Ductile iron for greater strength than gray cast iron and resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

Martin SK 2 1/2 Quick Disconnect Bushing, Ductile Iron, Inch, 2.5\ Bore, 2.812\ OD, 1.93\ Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Ductile iron for greater strength than gray cast iron and resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

Yeshfit 1/8 Dia,Micro Solid Tungsten Carbide Coated Tip Twist Drill Bits for Stainless Steel,Hardened Steel CNC Metal Drilling (1/8x2, for Steel)

  • long tool life and faster cutting speeds,and used in high temperature drilling applications.
  • Suitable for carbon steel, chilled cast iron,ductile iron, gray cast iron,die steel, heat resistant alloy steel,tool steel..
Check Stock

Martin E 2 3/8 Quick Disconnect Bushing, Ductile Iron, Inch, 2.38\ Bore, 3.834\ OD, 2.62\ Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Ductile iron for greater strength than gray cast iron and resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

Martin JA 1 1/4 Quick Disconnect Bushing, Ductile Iron, Inch, 1.25\ Bore, 1.375\ OD, 1.06\ Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Ductile iron for greater strength than gray cast iron and resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

Martin J 100MM Quick Disconnect Bushing, Ductile Iron, Metric, 100 mm Bore, 130.75 mm OD, 114.3 mm Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Ductile iron for greater strength than gray cast iron and resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

Yeshfit 5/16 Dia,Micro Solid Tungsten Carbide Coated Tip Twist Drill Bits for Stainless Steel,Hardened Steel CNC Metal Drilling (5/16x2-9/16, for Steel)

  • 5/16 Blade Dia,1-3/16'' Straight Flute Length.
  • T.I.R.:003c10um(0.01mm),Made of Solid Tungsten Steel,TiAlN Coated.
  • long tool life and faster cutting speeds,and used in high temperature drilling applications.
  • Suitable for carbon steel, chilled cast iron,ductile iron, gray cast iron,die steel, heat resistant alloy steel,tool steel..
Check Stock

Martin SK 24MM Quick Disconnect Bushing, Ductile Iron, Metric, 24 mm Bore, 71.42 mm OD, 49.21 mm Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Ductile iron for greater strength than gray cast iron and resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

Franzis Porsche 911 Boxer Engine Model Kit - Porsche Museum Edition

  • BUILT TO LAST: Cast from ductile iron, this Jake's Lift Kit is 3X stronger than gray iron which gives superior strength compared to welded spindle kits.
  • MADE TO FIT: Specifically designed for Club Car DS electric models (1981-2003.5) and gas models (1996.5-2003.5) with metal dust covers on the front hubs.
  • EASY INSTALLATION: No-cut, no-weld design makes for the fastest bolt-on install possible, with easy to follow instructions included.
  • A BETTER RIDE: Designed to lengthen the wheelbase and square up the cart for added stability and can accomodate up to 20" tires.
  • MADE IN THE USA: For over 30 years, Jake’s proudly offers quality, American-made lift kits and off-roading accessories for your cart. Go ahead and take the road less traveled–we’re got your back.
Check Stock

Steel Dragon Tools® 74227 H4 Hinged Pipe Cutter 2\ - 4\ Capacity Fits REED® and RIDGID® Cutter Wheel

  • H4 will cut cast iron and ductile iron with Steel Dragon Tools H4I 03122 cutter wheels (included a.
  • H4 will cut cast iron and ductile iron with Steel Dragon Tools H4I  03122 cutter wheels.
  • Full-closed frame for maximum efficiency under minimal effort..
  • Guide fingers ensure accurate wheel alignment for even cut..
  • Steel Dragon Tools H4 will accept compatible Reed cutting wheels..
Check Stock