Top Dual Motor Driver Reviews

8PCS L298N Motor Drive Controller Board Dual H Bridge DC Robot Stepper Motor Compatible with Ardu-ino Electric Projects, Smart Car Robot

  • Dual-channel H-bridge driver working mode creates higher working efficiency,L298N as main chip, Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors..
  • The L298N driver module, using L298N chip can directly drive two 3-30V DC motor, and provides a 5V output interface, you can chip circuitry to 5V power supply, support 3.3VMCU control, you can easily control the DC motor speed and direction, you can also control the 2-phase stepper motor, smart car essential..
  • Terminal driver part of the supply area VMS: +5V ~ +35V.
  • Drive part of the peak current Io: 2A / Bridge.
  • Logical part of the terminal power supply range Vss :4.5-5 .5V.
  • Logical part of the operating current range: 0 ~ 36mA.
  • The control signal input voltage range: 4.5-5.5V low 0V high.
  • To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage.
  • High working power to 46v, large current can reach 3A MAX and continue current is 2A, power to 25w..
  • Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability, large capacity filter capacitance,afterflow protection diode, more stable and reliable..
Check Stock

4 Axis Stepper Motor Nema 23 Dual Shaft 425oz-in 112mm+CW5045 Driver 4.5A 256 Microstep+5 Axis Breakut Board+400W 36V Power Supply CNC Controller Kit for CNC Router Engraver Milling Machine

  • ♞【Stepper Motor】4pcs 23HS2430B nema23 stepper motor.
  • ♞【Stepper Motor Driver】4pcs CW5045 driver, current: 1.3A-4.5A.
  • Driver microstep: 1 (1.8°), 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128, 1/256, 1/5,....
  • ♞【Control Board】1pcs 5 Axis breakout boad with cables,this breakout board needs to be connected to the parallel port and USB port of the....
  • ♞【Power supply】1pcs 400W,36V/9.7A switching power supply.
  • ♞【Application】This cnc kit are widely used in engraving machine, printer, medical equipment, embroidery machine, stage lighting, textile....
Check Stock

DC Motor Driver, DROK L298 Dual H Bridge Motor Speed Controller DC 6.5V-27V 7A PWM Motor Regulator Board 12V 24V Electric Motor Control Module Industrial 160W with Optocoupler Isolation

  • DROK DC motor driver input voltage range is DC 6.5V-27V, can be input DC 12V or 24V, rated output current of each port is 7A, total output power is 160W..
  • STRONG DRIVE: the motor controller board adopts dual H bridge, can drive two DC motors at the same time..
  • FORWARD and REVSERSELY ROTATE: the IN1, IN2/IN3, IN4 port can control forward or reverse motor rotation..
  • PWM SPEED CONTROL: enable signal terminal (ENA) input PWM can regulate speed, PWM frequency range 0-10KHZ..
  • UNDER VOLTAGE PROTECTION: the motor driver module is with under voltage protection to prevent instantaneous large current from damaging the module..
Check Stock

HiLetgo 5pcs L9110S DC Motor Drive Module Stepper Motor Drive Controller Board 2.5-12V H-Bridge Can Drive Dual DC Motor at The Same time or 4 Wire 2 Phase Stepper Motor

  • HiLetgo L9110S H-bridge DC Stepper Motor Driver Controller Board.
Check Stock

Aideepen 5pcs Dual H-Bridge DC Stepper 1.5A 2 Way DC Motor Driver Module Replace Stepper L298N for Smart Car Power

  • Use of imported original chip, built-in low on-resistance MOS switch.
  • Dual H-bridge motor driver, can drive two DC motors or a 4-wire two-phase stepper motor.
  • Dual 1.5A * 2, the peak current to be 2.5A, built-in thermal protection circuit, do not be afraid motor stall burned, automatic recovery after the temperature dropped.
  • Minimal heat, no heat sink, small size, low power consumption, is ideal for battery powered.
  • Small size, light weight, low standby current, is the ideal choice for your car model.
Check Stock

4 Axis CNC Nema23 Stepper Motor Dual Shaft 425oz-in 3A+FMD2740C Driver 40V 4A+400W 36V Power Supply+USB CNC Breakut Board Controller Kit For CNC Router

  • ♞【Product】4 Axis nema23 stepper motor driver usbcnc controller kit.
  • Wirings: "A+"=Red / "A-"=Green / "B+"=Yellow / "B-"=Blue.
  • ♞【Driver】FMD2740C driver Voltage: DC12-50V.
  • Current: rated maximum output reaches: 4A.
  • Subdivision precision 2 8 16 32 64 128 10 20 optional.
  • ♞【4 Axis USBCNC Breakout Board】USB port,only support USB CNC Software,not fit for Mach3 software.Our parcel include a CD,it include the user manual and USBCNC software.
  • ♞【400W 36V 11A DC Switching power supply】Please flip the side input voltage selector switch,Input: AC110V-120V or AC220V-240V.
  • 【Computer system 】Support Win XP/7/8/10,if you can not get the activation code on Win 10,pls let us know,we will help you to solve it..
Check Stock

SVS PB-1000 Pro Ported Subwoofer (Black Ash)

  • 325 Watts RMS and 820+ Watts Peak Power Sledge STA-325D Amplifier combines massive high current output of discrete MOSFETs with Class D efficiency. Boasting vanishingly low distortion the unique design unleashes nearly limitless on-demand power while maintaining driver control.
  • High-Excursion 12-inch SVS Subwoofer Driver features dual ferrite magnet motor assembly with long-throw parabolic surround for extreme excursion that delivers massive output with finesse and accuracy even at the most intense listening levels.
  • 50MHz Analog Devices Audio DSP renders pinpoint accurate frequency response through advanced in-room tuning and powerful controls while letting the subwoofer take control of a space with room-filling bass.
  • Groundbreaking SVS Subwoofer DSP Smartphone App is the easiest way ever to control volume manage custom presets and fine tune performance in your system.
  • Acoustically Tuned Dual Port Cabinet Design allows for maximum airflow without distortion enhancing the quantity and quality of bass output at all drive levels.
Check Stock

6 Pack Mini L298N DC Motor Driver, MELIFE MX1508 Mini Dual Channel 1.5A 1.5A 2 Way PWM Speed Controller Dual H-Bridge Replace Stepper

  • Motor drive module is ideal for use in battery-powered smart car, toy cars, robots..
  • Dual H-bridge motor driver, can drive two DC motors or a 4-wire two-phase stepper motor..
  • Supply voltage 2V -- 10V, can drive two DC motors or a 4-wire 2-phase stepper motors ,can achieve forward rotation or reverse rotation, it is possible to adjust the rotation speed..
  • Dual 1.5A * 2, the peak current to be 2.5A, built-in thermal protection circuit, do not be afraid motor stall burned, automatic recovery after the temperature dropped..
  • Use of imported original chip, built-in low on-resistance MOS switch, minimal heat, no heat sink, small size, low power consumption, is ideal for battery powered..
Check Stock

RATTMMOTOR 400W Blushless CNC Air Cooled Spindle Motor ER8 12000RPM + 600W Blushless Spindle Motor Driver LCD Panel without Hall + 55mm Clamp Mount for CNC Router Milling Machine

  • 【Brussless Spindle Motor】Power: 400W.
  • Note: Please see clearly that this spindle motor output shaft is with ER8 collet,and output shaft is complete shaft, can't be exchanged to ER11, ER16....
  • 【Brussless Spindle Motor Driver】Maximum driver power: 600W.
  • Maximum driver motor running speed: 12000R/Min.
  • Brushless spindle driver（Model Name: NVBDL）is specialized for the ecomomic engraving machine,it matchs with the brushless DC motor. With the....
  • The users can take down the panel from the main driver and install it on the controller cabinet.By the panel,you can set the parameter,control motor....
Check Stock

SVS PC-2000 Pro 12\ Ported Cylinder Subwoofer (Piano Black)

  • Dual ferrite magnet motor assembly weighing nearly over 15 lbs generates massive amounts of magnetics to produce extreme driver excursion without losing control.
  • Lightweight and rigid aluminum vented cone with composite fiber dustcap creates room-energizing SPLs while maintaining control even at the highest drive levels.
  • Long-throw parabolic surround using proprietary injection molding allows extreme excursion for bass you can feel while preserving drive unit longevity.
  • Aluminum pole piece extension improves thermal management properties for exceptional heat dissipation.
  • Dual layer voice coil design maximizes linearity and accuracy at full excursion while minimizing distortion and power compression.
Check Stock

SVS SB-1000 Pro Sealed Subwoofers - Pair (Black Ash)

  • Fiber composite cone with exceptional stiffness-to-mass ratio moves massive amounts of air while starting and stopping on a dime with crisp precision.
  • Proprietary injection-molded extreme-excursion surround ensures flawless pistonic motion for pinpoint control and accuracy without distortion at the highest drive levels.
  • Dual ferrite magnet motor assembly with extended aluminum polepiece produces effortless on-demand driving-force for subtle and over-the-top bass thrills.
  • Powder-coated FEA optimized driver basket provides maximum rigidity tensile strength and thermal energy transference.
  • Dual-layer voice coil design enhances linearity and fidelity at full excursion while minimizing distortion and power compression.
Check Stock

Seizmik UTV Universal Windshield Wiper Kit

  • Fits Any Hard Coated Polycarbonate Windshield.
  • Equipped with dual, independently adjustable jets, 110º of wiper range motion to cover the entire driver's side of the windshield.
  • Two-speed motor with an automatic park feature allows you to position the blade up and out of the way when turned off.
  • DO NOT attempt to install in glass or acrylic.
Check Stock

DEWALT 20V MAX Hammer Drill and Oscillating Tool, Power Tool Combo Kit, Cordless, 1/2 inch, 2 Batteries and Charger Included (DCK224C2)

  • WORK IN TIGHT SPACES: Hammer Drill/Driver is compact front to back at less than 7 in..
  • LIGHTWEIGHT DESIGN: Hammer Drill/Driver weighs only 2-1/2 lbs..
  • UNIVERSAL USE: Includes universal accessory adapter for use with most oscillating tool accessory brands.
  • ULTIMATE SPEED AND APPLICATION CONTROL with Oscillating Multi-Tool"s Dual-Gripvariable speed trigger.
  • OPTIMUM RUNTIME AND PERFORMANCE: Both tools include an efficient brushless motor.
Check Stock