Dakine Tour Snowboard Bag, Black, 165cm
- Removable padded shoulder strap, dual end handles.
- Exterior zippered pocket, packs down tight for easy storage.
Top Dual Main Board Pc Reviews
Thule 3203591 EnRoute Backpack 20L Black
- Protect a 14" PC or 15" MacBook and 10" tablet in dedicated, padded slip pockets.
- Secure belongings in main compartment with flap-style opening that zips and buckles closed.
- Dual access to laptop, tablet and main compartment through top entry or side zippers.
- Quickly retrieve phone or small valuables in soft-lined pocket.
- Keep small items secure and accessible in internal mesh pockets.
Samsung DA94-02663A Main Control Board
- The Samsung DA94-02663A Main Control Board is a genuine OEM (Original Equipment Manufacturer) part designed and engineered to exact specifications.
- Replacement Samsung Refrigerator Main Control Board is a PCBA (Printed Circuit Board Assembly) manages the functions of the refrigerator such as....
- Samsung DA94-02663A Refrigerator Main Control Board is also called the Electronic Control Board or Main PCB (Power Control Board).
- High quality Samsung OEM DA94-02663A Refrigerator Main Control Board is manufactured with premium materials for durability and exact fit, be sure to....
- Repair your appliance with confidence when you choose Genuine Samsung Factory Parts & Accessories.
TESmart DisplayPort + HDMI 4x2 Dual Monitor KVM Switch for 2 PCs + 2 Monitors 2 Ports Updated 4K @ 60Hz (Black)
- 【DP + HDMI KVM Switch】 TESmart 2 ports KVM switch using only 1 set of keyboard, mouse and 2 monitors to control 2 computers, support display one computer’s main and extended desktop. ( Each PC must make 2 video connections for dual monitor setups.).
- 【2 modes of Dual Monitor KVM】 Dual monitor extended desktop (Mode 1). Switch to Mode 2 to split desktop with each PC displaying on 1 monitor simultaneously..
- 【4K@60Hz Resolution】 The Dual Monitor KVM Switch resolution up to 3840*2160@60Hz on both monitors simultaneously. EDID emulation maintains correct display information..
- 【★ A Higher Level of Keyboard and Mouse Compatibility】 Support keyboard and mouse pass-through mode (Semi-DDM USB). You can use more keyboard and mouse functions that are not supported by ordinary KVM. Supports wired, wireless, mechanical, multimedia, and gaming keyboards. No delay, zero latency keyboard and mouse switching. READ FAQ..
- 【Multiple switching methods】 Support keyboard hotkey, front panel buttons and IR signals to control this Dual Monitor KVM. (AAA battery not included. ).
Yahboom 4 Port USB 3.0 Hub for Raspberry Pi Jetson Nano ROS Robot, Compatible with USB 3.0/2.0/1.1 Driver-Free Plug&Play, Onboard External USB-A，5V (Micro-USB)，9~24V Power Port, for High-Power Device
- VL817 main control chip -- USB3.0 HUB expansion board aims to solve the problems of insufficient USB interface on the main board and insufficient power supply caused by the increase of USB peripherals.Equipped with VL817 main control chip scheme, the main control board performance is stable and the transmission is stable and safe. It uses USB3.0 communication interface and HUB chip expand 4 USB interfaces to ensure high-speed data transmission of the interface..
- 1 to 4 data extension -- The expansion efficiency of the four ports is doubled and Each USB device has an independent indicator light. Built in over current protection, short circuit protection and power reverse connection protection circuit to ensure the safe use of USB devices..
- Support wide voltage external power supply -- In addition to the USB-A standard data interface power supply, this product also supports 5V (micro-USB), 9~24V (DC interface/XH2.54 socket) wide-voltage external power supply. Even if multiple high-power peripherals are connected at the same time, the stability of power supply and signal transmission can be guaranteed..
- Support equipment -- Support ROS robot / car, Raspberry Pi / Jetson series board, PC, other boards, industrial computer, etc. Compatible with win7 / 8 / 10....
Dakine High Roller Snowboard and Gear Bag Black 165cm
- Holds 2+ boards (1 w/ bindings mounted), 1pr boots and outerwear, 360° padded board protection, End handle pairs with rolling luggage for one-handed operation, Removable boot bag.
- Removable outerwear bag, #10 YKK lockable main zipper, Durable, over-sized 9cm urethane wheels, Two exterior zippered pockets.
- Dual 1.5 (38mm) compression straps, Packs down tight for easy storage.
- 600D Recycled Polyester ripstop with water repellent finish, bluesign approved materials..
- 165cm - 13.5 x 11.5 x 70 [ 34 x 29 x 178cm ] - Fits max. 165cm board - 7.1 lgs [ 3.2 kg ] - 175cm - 13.5 x 11.5 x 74 [ 34 x 29 x 188cm ] - Fits max. 175cm board - 7.4 lbs. [ 3.3kg ].
ARGB Extension Cable Kit 24-Pin ATX Motherboard 8-Pin PCIE 8-Pin GPU Addressable with RGB Controllerfor Computer Gaming Case (24-Pin PSU+8-Pin GPU)
- With a double layer structure of 1.5cm/0.59" thickness, the neon colored lines require sufficient chassis space for installation..
- 24 copper wires are connected to the power supply line at one end, which not only satisfies the light effect of the PC case, but also maintains the stability of power supply..
- Luminous wire for 24-P main board, the bottom layer is silver reflective extension wire, the copper conductor is AWG18, and the upper layer is the light-emitting device plus 12×1.5φ optical fiber cable..
- With a two layer design, lighting effects are independently from the 8-pin GPU or 24-Pin motherboard power supply cables.
- Dazzling neon lights, light flowing like a waterfall, dazzling rainbow on the front of the main board..
STLINK-V3SET Microcontrollers ST STM8 and STM32 MCU USB Swim JTAG SWD Modular Stand-Alone in-Circuit Debugger Programmer SPI I2C CAN GPIOs @XYG
- The STLINK-V3SET is a modular stand-alone debugging and programming probe for the STM8 and STM32 microcontrollers. It is composed of a main module and....
- The SWIM and JTAG/SWD interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board..
- The STLINK-V3SET also provides a Virtual COM port interface allowing the host PC to communicate with the target microcontroller through one UART, and....
- The modular architecture of STLINK-V3SET enables to extend its main features through additional modules such as the adapter board..
TL TENLOG TL-D3 V2 Independent Dual-Head 3D Printer WI-Fi Function Silent Motherboard TMC2209 Driver 400W Power Supply Support PVA TPU ABS PLA BMG extruder 11.8 x11.8 x13.8
- 【INDEPENDENT DUAL EXTRUDERS】:Our TL-D3 V2 dual extruder 3D printer has dual nozzles independent of each other, so you can print in dual....
- 【32-Bit Motherboard】: The main chip is upgraded from 8-bit to 32-bit, and the printer runs more smoothly The 32-bit motherboard supports wifi and....
- 【Print recovery】：The printer can resume printing after a power outage or material supply stops to save time and consumables. You can also print....
- 【Upgraded PEI Magnetic Board】: TENLOG upgraded PEI magnetic board, which makes the printed matter fit better and will not warp. Even the first....
- [Super cooling module]: The fans of the two nozzles can be controlled independently. The side fans of the nozzles use two blower fans to dissipate....
WORX Hydroshot Ultra WG649 40V High Pressure Hand Held Cleaner Battery and Charger Included
- [DRAWS FROM ANY FRESH WATER SOURCE] Lakes, pools, buckets, just drop in the 20-foot hose and start spraying.
- [11x MORE FORCE THAN A HOSE] That’s right, 725 psi is up to 11x more water pressure than a garden hose with a nozzle attached.
- [CHARGE TWO BATTERIES AT ONCE] On-board battery charge level indicator，dual port charger can charge 2 batteries at the same time.
- [SAME BATTERY, EXPANDABLE POWER] Worx Power Share is compatible with all Worx 20v and 40v tools, outdoor power and lifestyle products.
- [INCLUDED COMPONENTS] 1pc WA3884 20V 4A dual charger, 2pc WA3578 4Ah battery, 6m hose, Quick Connect Adapter(WA4017), High Pressure Hose (6m), Long lance(526.5mm), Multi-Spray nozzle, Hook up.
Monster Sound Effects
- ...pports motion sense only on NS(Pro version compatible with Switch & PC).
- No PC/Android motion sense aim assist. No fit for Amiibo function. Support macro function 10s (Pro version supports 10min). The sensitivity of joystick and ZR ZL analog trigger can't be adjusted..
- Dual Vibration Motor & Six Axis Gyroscope: Dual vibration motors, support rumble intensity adjustment (four-level vibration adjustment, the lowest level is no vibration). It gives you a good game immersion. With six axis gyroscope, the bluetooth controller can detect the tilt of the controller and react quickly, making switch motion-sensing games more fun..
- New Pantented Button: 50 million times of ultra-long life. Anti-stuck and anti-disconnection. Excellent conductive rubber hand feeling for long time play. The best alternative switch controller compatible with Nintendo Switch/ Switch Lite/Switch OLED, PC(Steam), Android IOS and macOS. You can enjoy a lot of games compatible with Nintendo Switch. An excellent third-party controller..
iCubeSmart 3D Led Cube Light DIY Kit with 3D Animation Editing Software Squared LED 8x8x8 Electronic Toy for Children and Teenagers Learning Activities Suit 3D8S-BLUE
- [LED CUBE KIT] This is a DIY welding package for 3D cube light, a 3D matrix made up of 512 blue square LEDs, which can display a lot of colorful....
- [SIMPLE DIY] The PCB main board in this package has been well soldered and tested, and users only need to solder the LED lamp themselves, so users are....
- [EFFECTS CAN MODIFIED] More than 20 kinds of brilliant animation effects have been built into the main board of this cube. Users can display the....
- [MAIN BOARD FUNCTION] The size of the main board PCB is 7.08*7.28inch.
- there are 4 keys on the main board to....
- [PROFESSIONAL SERVICES] iCubeSmart has been devoted to the design and production of light cube for 9 years. We have designed various sizes of led cube....
iCubeSmart 3D Led Cube Light DIY Kit with 3D Animation Editing Software Squared LED 8x8x8 Electronic Toy for Children and Teenagers Learning Activities Suit 3D8S-MULTI
- [LED CUBE KIT] This is a DIY welding package for 3D cube light, a 3D matrix made up of 512 red, green and blue square LED lamps, which can display a....
- [SIMPLE DIY] The PCB main board in this package has been well soldered and tested, and users only need to solder the LED lamp themselves, so users are....
- [EFFECTS CAN MODIFIED] More than 20 kinds of brilliant animation effects have been built into the main board of this cube. Users can display the....
- [MAIN BOARD FUNCTION] The size of the main board PCB is 18*18.5cm.
- there are 4 keys on the main board to switch....
- [PROFESSIONAL SERVICES] iCubeSmart has been devoted to the design and production of light cube for 9 years. We have designed various sizes of led cube....