Top Dual H bridge Circuitry Reviews

KICKER 43TC104 Comp 10" Subwoofer in Sub Box Enclosure+2-Ch. Amplifier+Amp Kit

  • ...50 @ 2 ohms or 1 x 1500 @ 4 Ohms). High-Speed MOSFET Power Supply. Studio-Grade Bipolar Output Stage Transistors. Fully Adjustable 12dB / Octave Crossover. Low Pass Filter: 50Hz - 250Hz.
  • High Pass Filter: 15Hz - 250Hz. Fully Adjustable 12dB Bass Equalizer with Differential Circuitry. 2-Ohm Stable Stereo. 4-Ohm Mono Bridgeable. Mute and Delay Soft Start System. Full IC-Controlled Protection Circuitry. RCA Preamp Line Output. ELNA Brand Audiophile Capacitors. 8 Volt Preamp Circuitry. Status Mode LED Indicator. High Level Input with Smart Auto Turn-On. Minimum THD at Rated Power: < 0.05%. Frequency Response: 10Hz - 40KHz. Damping Factor: > 200 @ 100Hz. 50 Amp Maxi Fuse.
Check Stock

8PCS L298N Motor Drive Controller Board Dual H Bridge DC Robot Stepper Motor Compatible with Ardu-ino Electric Projects, Smart Car Robot

  • Dual-channel H-bridge driver working mode creates higher working efficiency,L298N as main chip, Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors..
  • The L298N driver module, using L298N chip can directly drive two 3-30V DC motor, and provides a 5V output interface, you can chip circuitry to 5V power supply, support 3.3VMCU control, you can easily control the DC motor speed and direction, you can also control the 2-phase stepper motor, smart car essential..
  • Terminal driver part of the supply area VMS: +5V ~ +35V.
  • Drive part of the peak current Io: 2A / Bridge.
  • Logical part of the terminal power supply range Vss :4.5-5 .5V.
  • Logical part of the operating current range: 0 ~ 36mA.
  • The control signal input voltage range: 4.5-5.5V low 0V high.
  • To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage.
  • High working power to 46v, large current can reach 3A MAX and continue current is 2A, power to 25w..
  • Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability, large capacity filter capacitance,afterflow protection diode, more stable and reliable..
Check Stock

Rockville RXM-T1 1500 Watt Peak Marine/Boat 2 Channel Amplifier Stereo Amp

  • Rockville RXM-T1 1500w Peak / 370w Dyno-Certified RMS Marine/Boat 2 Channel Amplifier Stereo Amp..
  • Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc). 250 Watts (2 x 125 Watts) at 4 ohms and 1% THD+N. 370 Watts (2 x 185 Watts) at 2 ohms 003c 1% THD. 1 x 370 Watts bridged @ 4 Ohms 003c 1% THD..
  • Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc). 1500 Watts (2 x 750 @ 2 ohms or 1 x 1500 @ 4 Ohms). High-Speed MOSFET Power Supply. Studio-Grade Bipolar Output Stage Transistors. Fully Adjustable 12dB / Octave Crossover. Low Pass Filter : 50Hz - 250Hz. High Pass Filter : 15Hz - 250Hz. Fully Adjustable 12dB Bass Equalizer with Differential Circuitry. 2-Ohm Stable Stereo. 4-Ohm Mono Bridgeable..
  • Mute and Delay Soft Start System. Full IC-Controlled Protection Circuitry. RCA Preamp Line Output. ELNA Brand Audiophile Capacitors. 8 Volt Preamp Circuitry. Status Mode LED Indicator. High Level Input with Smart Auto Turn-On. Minimum THD at Rated Power: 003c 0.05%..
  • Frequency Response : 10Hz - 40KHz. Damping Factor : 003e 200 @ 100Hz. 50 Amp Maxi Fuse. Dimensions : (W x H x L) 8.6" x 2" x 13".
Check Stock

(4) Rockville 6.5\ LED Swivel Metal Marine Wakeboard Speakers+Amplifier+Amp Kit

  • ... x 200 Watts RMS) @ 2 Ohms .800 Watts (2 x 400 Watts RMS) @ 4 Ohm Bridged .500 Watts (4 x 125 Watts RMS) @ 4 Ohms. Peak Power: .1600 Watts (2 x 800 @ 2 Ohms or 1 x 1600 @ 4 Ohms). High-Speed MOSFET Power Supply. Studio-Grade Bipolar Output Stage Transistors.
  • Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. CH3 & CH4 Low Pass 50Hz - 3KHz. CH3 & CH4 High Pass 15Hz - 1KHz. CH1 & CH2 High Pass 50Hz - 300Hz, 500Hz - 3Khz (x10). Crossover Band-Pass Control. Fully Adjustable 12dB Bass Equalizer. 2 Ohm Stable Stereo. 4 Ohm Mono Bridgeable. 3 Channel Mixed-Mono Capable. Full IC-Controlled Protection Circuitry. Mute and Delay Soft Start System. High Level Input with Smart Auto Turn-On. Full IC-Controlled Protection Circuitry.
Check Stock

Polk Audio MM 1242 SVC 12 1260 Watt Car/Marine Subwoofer Sub+Amplifier+Amp Kit

  • ...50 @ 2 ohms or 1 x 1500 @ 4 Ohms). High-Speed MOSFET Power Supply. Studio-Grade Bipolar Output Stage Transistors. Fully Adjustable 12dB / Octave Crossover. Low Pass Filter: 50Hz - 250Hz.
  • High Pass Filter: 15Hz - 250Hz. Fully Adjustable 12dB Bass Equalizer with Differential Circuitry. 2-Ohm Stable Stereo. 4-Ohm Mono Bridgeable. Mute and Delay Soft Start System. Full IC-Controlled Protection Circuitry. RCA Preamp Line Output. ELNA Brand Audiophile Capacitors. 8 Volt Preamp Circuitry. Status Mode LED Indicator. High Level Input with Smart Auto Turn-On. Minimum THD at Rated Power: < 0.05%. Frequency Response: 10Hz - 40KHz. Damping Factor: > 200 @ 100Hz. 50 Amp Maxi Fuse.
Check Stock

(2)Rockville RSG12 12 3Way 1000 Watt 8Ohm Passive DJ PA Speaker +Stands +Cables

  • ... 400 Watts x 4 Channel. 4 Ohm: 260 Watts x 4 Channel. 4 Ohm Bridged: 800 Watts x 2 Channel. (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc).
  • 25 Amp x 2 ATC Fuse, Frequency Response: 10Hz - 50KHz, Bluetooth On Mode LED Indicator, Status Mode LED Indicator, 8 Volt Preamp Circuitry, RCA Line Output, Bluetooth On and Off Mode Switch, 2CH/4CH Input Mode Switch, Mute and Delay Soft Start System, Adjustable Input Level Control, Fully Adjustable 12dB Bass Equalizer, Full IC-Controlled Protection Circuitry, Fully Adjustable 12dB / Octave Crossover with Differential Circuitry, Studio-Grade Bipolar Output Stage Transistors..
Check Stock

Gemini GPA-4800 4000W Professional DJ Power Amplifier

  • Rockville RPA9 3000 Watt peak 2 channel professional/DJ rack mount amplifier. 2U rack space.
  • Bridged and stereo output switch makes this perfect for (2) subwoofer, (2) speakers, or (4) speakers.
  • Built in Crossover switch allows make this perfect for speakers, monitors, or subwoofers.
  • Channel a & B clipping LED indicators. Channel a & B separate level controls.
  • Power, Signal, overload, clipping, and protection LED indicators on front of amp.
  • Heavy duty rack mount ears with handles. Built-in dual high velocity quiet cooling fans.
  • Maximum headroom for 4-ohm and 8-Ohm speakers. Level controls for precise setting and matching of sensitivity.
  • Computer controlled ice protection circuitry against speaker short circuit, Thermal over load, DC over load. User serviceable fuse (5A, 250V).
  • Frequency response: 20Hz to 20kHz 102dB. Power Requirements: 120V/ 50-60Hz. Weight: 17.19 lbs. Dimensions: 18.97" X 13.97" X 3.54".
Check Stock

SereneLife PAMP1000 - Digital Stereo Power Amplifier- Dual Channel Amp Design, Built-in Circuitry Protection, Stereo/Bridged Mode Selector, Auto System Activation & Compatible for External Devices

  • ...home. It allows you to deliver high quality sound & power for the ultimate sound experience.
  • PRODUCT HIGHLIGHTS: Dual Channel Amp Design with A/B Speaker selector. Auto Signal Sensing Power On. Dual Auto-Switching Inputs. Independent level & balance controls. Rotary knob volume and balance controls & it has Built-in Circuitry Protection.
  • COMPATIBLE FOR EXTERNAL DEVICES: This amp features RCA stereo inputs compatible w/ wide variety of external devices (TVs, computers, smartphones, tablets, MP3/CD players, etc.). Speaker terminal binding posts allow you to connect speakers in stereo.
  • Power On/Off Switch & LED Indicator - Auto Input Switching - Bridgeable Output - Dimensions: 16.5''W x 2.36''H x 8.2''D.
  • Speaker A/B Channel Selectors & LED Indicators - 2 Stereo Line Inputs - Replaceable Fuse.
  • Balance Control - 1 Stereo Line Output - Unswitched 200W Max AC Outlet.
  • Volume Control - Stereo/Bridged Mode Selector - 110/220 Voltage Selector.
  • Auto On Switch - Speaker A/B Binding Post Terminals - Detachable Power AC Input.
Check Stock

DS18 GEN-X2000.4 Car Audio Amplifier 4-Channel Class A/B 2000 Watts Max Multichannel Amp - Bass Remote Knob Included - Lightweight Design - High Efficiency Rate

  • DS18 GEN-X2000.4D has the following RMS power: at 2 Ohms 180 watts / at 4 Ohms 120 watts / Bridge Powered at 4 Ohm 300 watts - THD Distortion 0.08%.
  • Designed, Engineered, Developed, and Quality Controlled in the USA - Minimum THD at Rated Power: 98dB. Under Voltage Protection at 10V. Over Voltage Protection at 15V. Frequency Response: 20Hz - 20KHz. Fuse Rating 35A x 3.
  • High-Speed MOSFET Power Supply Optical Coupler Class "A/B" Technology. Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. Low Pass Filter: 50Hz - 500Hz. High Pass Filter: 50Hz - 500Hz. Phase Control Switch. Full IC-Controlled Protection Circuitry. Remote Dashboard Subwoofer Control. Fully Adjustable 12dB Bass Equalizer. Mute and Delay Soft Start System..
  • Molded power terminals have the highest current draw in the industry and they also look way nicer than other terminal styles. Power and Protection LED Indicator. LED Illuminated Logo. Dimensions: (L x W x H) 488 x 190 x 60 mm.
  • IN THE BOX - Amplifier, Bass Remote, Owner's Manual, & Mounting Screws..
Check Stock

Rockville D14 7000w Peak/2000w RMS Class D 2 Channel Power Amplifier Pro/DJ Amp

  • ...trols. Power, signal, clipping, and protection LED indicators on front of amp. Heavy duty rack mount ears with handles..
  • Built-in variable high velocity quiet cooling fans. Maximum headroom for 4-ohm and 8-ohm Speakers. Level controls for precise setting and matching of sensitivity. Computer controlled IC protection circuitry against speaker short circuit, thermal over load, DC over load. User serviceable fuse (20A, 250V). Frequency Response (bandwidth @ 2Vrms out, @ -3.0dB) 10 Hz – 30 Khz. THD + Noise @ 1Khz full power: .
  • Power Ratings: RMS Power Output: Stereo 8 Ohm: 2 x 700W. Stereo 4 Ohm: 2 x 1000W. Bridged 8 Ohm: 1 x 2000W. Peak Power Output: Stereo 4 Ohm: 2 x 3500W Max. Bridged 8 Ohm: 1 x 7000W Max. ​​.
  • Terminals: Input Terminals: Combo jack (XLR and ¼”) A & B inputs. Output Terminals: Banana binding post speaker output. Speakon output. XLR output to connect another amplifier or powered sub.
Check Stock

Rockville Krypton F1 1600w Peak / 400w RMS 4 Channel Amplifier Car Audio Amp

  • Rockville KRYPTON F1 1600w Peak / 400w Dyno-Certified RMS 4 Channel Amplifier Car Audio Amp..
  • Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc). 2 Ohm: 100 Watts x 4 Channels 003c1% THD+N. 4 Ohm: 70 Watts x 4 Channels 003c1% THD+N..
  • 4 Ohm Bridged: 200 Watts x 2 Channel. Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc). 2 Ohm: 400 Watts x 4 Channels. 4 Ohm: 280 Watts x 4 Channels. 4 Ohm Bridged: 800 Watts x 2 Channels..
  • All channels on the amp have crossovers so they can each be used for subs or full range speakers or tweeters or midrange speakers. All channels on the amplifier are bridgeable. Digital Voltage Display on Amp. Fully Adjustable 12dB / Octave Crossover with Differential Circuitry..
  • Adjustable Subsonic Filter: 15Hz -40Hz (This filter is on the HPF knob). Adjustable Low Pass Filter: 40Hz – 4KHz. Adjustable Band Pass Filter: 15 Hz - 4 kHz (use both the HPF and LPF filter). Adjustable High Pass (Subsonic) Filter: 15 Hz - 4 kHz. 2CH/4CH Input Mode Switch. 8 Volt Preamp Circuitry.
Check Stock

NVX VADM4 400W RMS Full Range Class D 4-Channel Car/Marine/Powersports Compact Micro Amplifier - Marine Certified

  • RMS POWER: 【4 ohms: 75W x 4 chan.】【2 ohms: 100W x 4 chan.】【4 ohms bridged: 200W x 2 chan.】.
  • COMPACT: Cutting edge Micro Class D technology allows amplifier to be extremely compact. Dimensions: 7.2"L x 3.4"W x 1.45"H.
  • MARINE CERTIFIED: Our VAD line includes a conformally coated, marine grade circuit board. This allows this amplifier to be installed in nearly any application..
  • FEATURES: LED indicator lighting | 3-way protection circuitry | Balanced Differential Inputs | Speaker-level (high-level) inputs | Selectable crossover modes.
Check Stock

(4) Rockville RMC80B 8\ 1600w Marine Boat Speakers+6-Channel Amplifier+Amp Kit

  • ... x 220 Watts RMS) @ 2 ohms. 1300 Watts (3 x 440 Watts RMS) @ 4 ohm Bridged. 780 Watts (6 x 130 Watts RMS) @ 4 ohms. Peak Power: 2600 Watts (6 x 440 @ 2 ohms or 3 x 880 @ 4 Ohms). High-Speed MOSFET Power Supply. Studio-Grade Bipolar Output Stage Transistors. Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. CH 1 - 6. Low Pass 50Hz - 250Hz. High Pass 50Hz - 250Hz. Full IC-Controlled Protection Circuitry. Fully Adjustable Bass Equalization Control.
Check Stock