Top Dual Arm Hot Shoe Flashes Reviews

Neewer 16 Channel Wireless Remote FM Flash Speedlite Radio Trigger with 2.5mm PC Receiver for Flash Units with Universal Hot Shoe

  • This flash trigger device is control discreteness for camera to trigger hot shoe flashgun synchronously. It's made up of two parts named signal transmitter and receiver. Work through wireless wireless remote signal controlling.
  • The transmitter is consisting of advanced designed circuit and component,and works through sending encoded signal. It comes with 2.5mm sync port,which permits the camera without hot shoe using this flash trigger.
  • This flash trigger can work with all camera with stand hot shoe mount and those cameras with 2.5mm mm port.(but not work with Sony flashes).
  • Very low voltage working make sure that high level of safety and no damage to camera.
  • It is very useful when you want to trigger 2 flashes at one time.
Check Stock

Pixel TF-322 Flash Hot Shoe Sync Adapter with Extra PC Sync Port Dedicated for Nikon DSLR & Flashgun

  • Pixel TF-322 Hot Shoe Converter for Nikon, Easy to install - just slide into your camera's hot shoe. This adapter can be used to connect third party flash via standard hot shoe or PC sync cord socket..
  • Work with most flash guns in auto mode or manual mode ，Only supports the i-TTL mode of Nikon's original flash..
  • The Pixel Hot Shoe Adapter would be a great addition to your studio.Easy to use and would be perfect for any of your photography need..
  • This hot shoe adapter is perfect to mount a flash that does not have a sync connector for connection to a PC sync cord. It will allow those cameras to trigger external flashes by using the sync cord..
  • Pixel TF322 hot shoe adapter fits all Standard ISO 518-2006 hot shoe flashgun including the SB-900, SB-800, SB-600, SB-80DX, SB-50DX, SB-30, SB-29/29s, SB-28/28DX, SB-27 etc. Not suitable for devices with sync voltage of more than 6 volts.
Check Stock

Zeetain Dual Speedlite Tripod Mount Bracket,1/4\ Dual Camera Mount Flash Extension Bar,8\ Dual Tripod Bracket for Camera,LED Video Light,DSLR Camera,Flash Light(2 Pack)

  • Length of this dual bracket :8.2x 1.1 x 0.11 inches/21 x 3 x 0.3 centimeters；Made of aluminum alloy,precisely match the finish of cameras..
  • Designed with 1/4 inches and 3/8 inches screw hole.
  • Also comes with 2 pieces of 1/4 inches adapter screws New design: it supports 2 cameras or flashes with hot shoe mount adapter at the same time Equipped with non-slip rubber pad, improving the anti-shake effects..
  • Single Dimensions:8.2x 1.1 x 0.11 inches/21 x 3 x 0.3 centimeters,Maximum loading capacity:3 kilograms,2.25 ounces/ 63 grams weight.
  • Great portability, easy to bring with you in any situation£»Note: Without Hot Shoe Socket£¬Flash and light stand are not included.
Check Stock

ChromLives Cold Shoe Bracket Extension Bar, Hot Shoe Extension, Microphone Mount with 1/4'' Tripod Screw Compatible with Mirrorless Camera Vlogging Sony A6400 6300 6500 6000 Zhiyun 4 DJI Osmo Pocket

  • Length of this dual bracket :8.2x 1.1 x 0.11 inches/21 x 3 x 0.3 centimeters；Made of aluminum alloy,precisely match the finish of cameras..
  • Designed with 1/4 inches and 3/8 inches screw hole.
  • Also comes with 2 pieces of 1/4 inches adapter screws New design: it supports 2 cameras or flashes with hot shoe mount adapter at the same time Equipped with non-slip rubber pad, improving the anti-shake effects..
  • Single Dimensions:8.2x 1.1 x 0.11 inches/21 x 3 x 0.3 centimeters,Maximum loading capacity:3 kilograms,2.25 ounces/ 63 grams weight.
  • great portability, easy to bring with you in any situation£»Note: Without Hot Shoe Socket£¬Flash and light stand are not included.
Check Stock

Neewer 16 Channels Wireless Radio Flash Speedlite Studio Trigger Set, Including (1) Transmitter and (4) Receivers, Fit for Canon Nikon Pentax Olympus Panasonic DSLR Cameras (CT-16)

  • Kit Includes: (1)CT-16 Wireless Transmitter, (4)CT-16 Wireless Receiver, (4)Sync Cable, (4)Convert Adapter, (1)Instruction manual.
  • Flash Trigger Transmitter: 433MHz transmit frequency secures fast response and stable transmission.
  • CT-16 Wireless Receiver: 16 channels, transmitting distance up to 98 feet/30 meters, no limits with directions or angles.
  • Fit for Most Flashes: Work with the receiver, the transmitter can trigger most sorts of camera studio flashes.
  • The transmitter is attached on the hot shoe of the camera while the receiver is plugged into the studio flash. Each receiver works with one studio flash.
  • Please Note: Camera, flash, soft umbrella, hot shoe base mount, AAA batteries for receiver are not included.
Check Stock

Neewer 16 Channels Wireless Radio Flash Speedlite Studio Trigger Set, Including (1) Transmitter and (3) Receivers, Fit for Canon Nikon Pentax Olympus Panasonic DSLR Cameras (CT-16)

  • Kit Includes: (1)CT-16 Wireless Transmitter, (3)CT-16 Wireless Receiver, (3)Sync Cable, (3)Convert Adapter, (1)Instruction manual.
  • Flash Trigger Transmitter: 433MHz transmit frequency secures fast response and stable transmission.
  • CT-16 Wireless Receiver: 16 channels, transmitting distance up to 98 feet/30 meters, no limits with directions or angles.
  • Fit for Most Flashes: Work with the receiver, the transmitter can trigger most sorts of camera studio flashes.
  • The transmitter is attached on the hot shoe of the camera while the receiver is plugged into the studio flash. Each receiver works with one studio flash.
  • Please Note: Camera, flash, soft umbrella, hot shoe base mount, AAA batteries for receiver are not included.
Check Stock

Neewer 16 Channels Wireless Radio Flash Speedlite Studio Trigger Set, Including (1) Transmitter and (2) Receivers, Fit for Canon Nikon Pentax Olympus Panasonic DSLR Cameras (CT-16)

  • KIT INCLUDES: (1)CT-16 Wireless Transmitter, (2)CT-16 Wireless Receiver, (2)Sync Cable, (2)Convert Adapter, (1)Instruction manual.
  • FLASH TRIGGER TRANSMITTER: 433MHz transmit frequency secures fast response and stable transmission.
  • CT-16 WIRELESS RECEIVER: 16 channels, transmitting distance up to 98 feet/30 meters, no limits with directions or angles.
  • FIT FOR MOST FLASHES: Work with the receiver, the transmitter can trigger most sorts of camera studio flashes.
  • The transmitter is attached on the hot shoe of the camera while the receiver is plugged into the studio flash. Each receiver works with one studio flash.
  • PLEASE NOTE: Camera, flash, soft umbrella, hot shoe base mount, AA batteries for receiver are not included.
Check Stock

Flashpoint Blast Power Pack BP-960 - (Li-Polymer, 5800mAh) Godox ProPac PB-960

  • Flashpoint Lithium Battery Pack - Shoulder Strap - AC Charger - Flashpoint 1 Year Warranty.
  • Extra large capacity swappable lithium battery.
  • Dual ports drive two flash units without sacrificing power.
  • LED battery Power Level Indicator on top.
  • Powers most pro shoe mount flashes from Canon, Nikon, Sony, Metz and Quantum Q and Treo flashes.
Check Stock

AODELAN Wireless Flash Trigger Transmitter and Receiver Set, Wireless Remote Speedlite Trigger with 3.5mm PC Receiver for Flash Units with Universal Hot Shoe

  • 8 Channels Range to 200m - AODELAN Wireless Flash Trigger Set used 2.4 GHz Frequency, 8 channels, communication range up to 650' / 200m, max flash sync speed of up to 1/250s..
  • Working for all most Speedlite and Cameras - Compatible with all most flash Units with Universal Hot Shoe (except Sony flashes) and cameras with 3.5mm port. Such as for Canon, Nikon, Yongnuo, Godox, Panasonic, Olympus, Pentax and FUJIFILM speedlite and cameras..
  • Transmitter can rotating 90° low adjustment - The transmitter's tilting joint allows it to be mounted vertically or horizontally onto your camera's hot shoe..
  • Wired and Wireless Remote Shutter- Wired and wireless shutter release functions. An included 3.5 to 3.5mm sync cable connects the trigger to a studio flash. A 3.5mm to PC plug adapter is also included for flashes with a 1/4" mono plug socket..
  • Internal antenna and LED indicators, easy to set..
Check Stock

SmallRig Multi-Functional Cold Shoe Mount with Safety Release 2797

  • 【About SmallRig 2797】 SmallRig 2797 is designed for accepting shoe mount devices such as flashes, lights, microphones, etc. NOTE: This cold shoe mount only Compatible with products with cold shoe base and hot shoe without electronic contacts.
  • 【1/4”-20 Screw】The cold shoe mount secures to rigs, brackets, and cages via a 1/4”-20 screw, and mounts to ball heads, magic arms, and monitor mounts via the integrated 1/4”-20 female thread.
  • 【Safety Release Button】 Featuring safety release in one end prevents the accessory from detaching accidentally to ensure your devices safe.
  • 【Compatibility】 Fits Any cages, ball heads, or any rigs features standard 1/4”-20 female thread and 1/4”-20 screw.
  • 【Package Includes】1 x Cold Shoe Mount & 1 x Allen Wrench.
Check Stock

ChromLives Dual Flash Bracket Hot Shoe Speedlight Stand Umbrella Holder Light Stand Bracket Mount 1/4'' to 3/8'' Compatible with Studio Video DSLR Camera Canon Nikon Yongnuo

  • Light Stand Bracket, Dual Cold Shoe Mount Extension Bar with Umbrella Holder..
  • Dual Flash Shoe Bracket- With double cold shoe mount on an Extension bar. Universal cold shoe mount for most DSLR Camera Canon, Nikon and other flashes with standard shoe mount or video LED light, studio light. (Note:this adapter does not fit Sony and Minolta flash).
  • Umbrella Mount Bracket- A hole design for mounting urbrella. 180° Swivel joint allow vertical adjustment of the umbrella and flash light..
  • Light Stand Bracket- Comes with a 1/4 inch to 3/8 inch screw spigot, allow the light stand bracket to attach to a tripod or light stand..
Check Stock

MEIKE MT24II-C 2.4 Wireless Macro Twin Flash Lite for Canon EF-Mount DSLR Cameras Such as T5i T4i T3i T3 T2i T1i XSi XTi SL1 EOS ect

  • Support Mode: TTL, Manual, Muilt, HSS(higt-speed sync) and LSS (low-speed sync), Front/rear curtaion sync, S1/S2 mode.
  • Support Camera: Canon 60D 70D 80D 760D 700D 650D 600D 550D 500D 1200D 1100D 7D 6D 5DS 5D3 5D4 40D 30D 20D 10Detc.
  • Compatible Flash, Meike, Yongnuo series flashes for Canon and Canon 320EX, 430EX1 580EX, 600EX, 600EX-RT, 430EX-RT flashes, photostudio, videostudio,....
  • Usage: Macro photography (flowers, insects, dental, jewellery etc), Portraits, interior, wedding etc.
  • Flash kit includes: 1 * MK-GT620N Trigger, 2 * MK-R200 Flashes, 2 * MK-R200 Diffusers, 2 * MK-R200 Hot Shoe, 2 * MK-R200 Flash stander, 1 * Cold Shoe,....
Check Stock

Flash Hot Shoe Mount Adapter to 1/4 Thread Hole with 1/4\-20 Male to 1/4\-20 Male Tripod Screw Adapter for Flash Holder Bracket Light Stands Umbrella Holder Flash Bracket,Strong and Solid (Update)

  • Flash hot shoe to 1/4" thread (Updated Solid Metal Connection Base), Support Canon Nikon Pentax Olympus Metz Sigma Nissin Speedlite.Note: May Not Work for Sony Flash..
  • 1/4" brass nut in the bottom,work for light stands/ flash holders with 1/4" screw head..
  • Designed with cold foot, Standard hot shoe support most flash, applicable to Canon Nikon Pentax Olympus Metz Sigma Nissin Flashes.
  • Comes with 1/4"-1/4" male to male screw for your varied configuration..
  • Package Includes 1x flash hot shoe mount adapter( Updated).
  • 1x 1/4"-1/4" screw. 100% Money Back..Note: Camera, flash , umbrella holder and tripod are not included..
Check Stock