Top Drop Down Lid Hinge Reviews

Douper Lid Stay 105 Degree Open with Soft Close, Lid Support for Toy Box and Upward Top-Opening Flap Doors (Pack of 2)

  • LID STAY SLOW CLOSING - Lid stay support built-in hydraulic dampening device. Doors and lids will come down slowly and softly which eliminates slamming doors or smashed fingers..
  • CONDITIONS OF USE - Per lid stay hinge can support the range of door weight 3-10 lbs, Door Height Range18-19 inch. Weight support will be doubled by using 2 lid supports (6lbs-20lbs).
  • COMPACT DESIGN OF LID STAY HINGE - The compact design allows for installation in tight fit areas. Douper lid hinge supports opening the lid at a maximum angle of 105 degrees.
  • 2-WAY INSTALLATION – Douper hinges can be installed on Top opening or Upward opening doors. Each lid hinge can be used for right or left hand mounting..
  • ONLY TAKES 10 MINUTES TO COMPLETE THE INSTALLATION by following the install placement measurement card and installation video..
Check Stock

Douper Lid Stay 105 Degree Open with Soft Close, Lid Support for Toy Box and Upward Top-Opening Flap Doors (Pack of 1)

  • LID STAY SLOW CLOSING - Lid stay support built-in hydraulic dampening device. Doors and lids will come down slowly and softly which eliminates slamming doors or smashed fingers..
  • CONDITIONS OF USE - Per lid stay hinge can support the range of door weight 3-10 lbs, Door Height Range18-19 inch. Weight support will be doubled by using 2 lid supports (6lbs-20lbs).
  • COMPACT DESIGN OF LID STAY HINGE - The compact design allows for installation in tight fit areas. Douper lid hinge supports opening the lid at a maximum angle of 105 degrees.
  • 2-WAY INSTALLATION – Douper hinges can be installed on Top opening or Upward opening doors. Each lid hinge can be used for right or left hand mounting..
  • ONLY TAKES 10 MINUTES TO COMPLETE THE INSTALLATION by following the install placement measurement card and installation video..
Check Stock

EAGO R-336SEAT Replacement Soft Closing Toilet Seat for TB336 , White

  • This seat is compatible with the following brands and models: EAGO TB336, Fresca FTL2336, Ariel TB336M.
  • Includes soft closing toilet seat & lid only.
  • The soft drop seat has an innovative hinge system that will gently guide the toilet seat down without a sound, eliminating the loud noise of a slamming toilet seat.
  • Modern elongated shape and lightweight plastic materiel.
  • Toilet part only. Toilet sold separately.
Check Stock

RUYUFE Lid Stay 105 Degree Open with Soft Close Lid Support for Toy Box and Upward Top-Opening Flap Doors Easy to Install

  • STURDY LID STAY WITH SOFT CLOSE-- The Lid stay hinge is made of nickel plated steel and plastic, and per lid-stay support the range of door weight....
  • LID STAY SLOW CLOSING -- Lid stay support built-in hydraulic dampening device. Doors and lids will come down slowly and softly which eliminates....
  • KEEP LID HINGE STAY OPENING, WIDE USAGE -- Never worry again about having to prop the lid open. This lid support will hold the lid open until you are....
  • COMPACT DESIGN OF LID STAY HINGE -- The compact design allows for installation in tight fit areas. The lid hinges supports opening the lid at a....
  • EASY TO INSTALL LID SUPPORT-- Updated manual can be downloaded in Amazon page.Easy to follow installation instructions ensure a perfect install the....
Check Stock

MIAO JIN Lid Stay Lid Support 105 Degree Open with Soft Close Cabinet Hinges for Toy Box and Upward Top-Opening Flap Doors Easy Close Hinges

  • Material: The Lid stay hinge is made of nickel plated steel and plastic, and per lid-stay support the range of door weight 6-10 lbs, Height 18-19....
  • Lid stay slow closing：Lid stay support built-in hydraulic dampening device. Doors and lids will come down slowly and softly which eliminates....
  • Keep lid hinge stay opening：Never worry again about having to prop the lid open. This lid support will hold the lid open until you are ready to....
  • The compact design allows for installation in tight fit areas. The lid hinges supports opening the lid at a maximum Angle of 105 degree. Each hinge....
  • Package include: Each package has 1 Pack ..
Check Stock

RUYUFE Lid Stay 105 Degree with Soft Close, Lid Hinge with Soft-Down for Door Cabinet Kitchen

  • LID STAY HINGE FOR DOWNWARDS OPENING DOOR--Designed for downward opening lid door ( Bureaus, buffets, wine glass cabinet) with concealed, piano or butt hinges. Doors and lids will come down slowly and softly which eliminates slamming doors or smashed fingers. Lid stay support built-in hydraulic dampening device..
  • STURDY LID STAY WITH SOFT CLOSE-- Per lid-stay support the range of door weight 6-10 lbs, Height 18-19 inch. Recommended door thickness: 20mm (25/32"). The Lid stay hinge is made of nickel plated steel and plastic..
  • KEEP LID STAY OPEN -- Never worry again about having to prop the lid open. This lid support will hold the lid open until you are ready to close. This lid stay is deal for DOWNWARDS opening doors, such as vanity lids, vertical cabinet doors and storage box, cabinetry, piano or butt hinges..
  • COMPACT DESIGN OF LID HINGE -- The compact design allows for installation in tight fit areas. The lid hinges supports opening the lid at a maximum Angle of 105 degree..
  • EASY TO INSTALL LID SUPPORT-- Easy to follow installation instructions ensure a perfect install the first time! Lid stay can be installed on the left or on the right..
Check Stock

200N Gas Struts Toy Box Hinges Soft Close Cabinet Hinges Hydraulic Lid Support Hinge Heavy Duty Lift and Up Hinge for Kitchen Cabinets Pack of 2

  • [ What You Get ] -- Package Including 2 Set heavy duty lid support hinges and mounting screws. The soft close hinges overall length is 12.6 Inch,....
  • [ Heavy Duty Lid Support Hinges ] -- These soft close toy box hinge is constructed by premium cold rolled steel and copper core, corrosion resistant....
  • [ Soft Close Stay Hinge ] -- Our Lid support hinge built in hydraulic dampening device, is excellent safety solution for heavy hinged lids, Doors and....
  • [ Widely Used Safety Close Hinge ] -- The soft down lid support can be mounted for right or left hand use, designed to support lids lowing slowly and....
  • [ 100% MONEY-BACK GUARANTEE ] -- If you have any problem about our soft close lid support hinges, please feel free to contact us, we will do our best....
Check Stock

Douper 200N Gas Struts Heavy Duty Soft Close Lid Support Hinges Automatic Slow Lowering Safety Pneumatic Lid Lifters Gas Springs Pack of 2

  • GENTLY CLOSE DESIGN — Excellent safety solution for heavy hinged lids, lids will lower slowly and gently to avoid smashing fingers.
  • HOLDS LID OPEN — These hinges will hold your lid open until you push it down. Never worry again about having to prop the lid open.
  • STRONG ENOUGH — Douper 200N heavy duty gas struts can support maximum 30lbs lid and lower gently.
  • Weight support will be doubled with 2 hinges (60lbs/ 2pcs).
  • 75°-105° OPEN ANGLE — Each lid hinge can be used for right or left hand mounting, keep the hinge installed for 75°-105° adjustable opening angles, depending on actual situation. Note: NO adjustments on placement measurements of the hinge mounted on side board..
  • WARM TIPS — Douper hinges will not applicable with the lid at width more than 50” and height over 25”. And must with a 9 inch clearance. Hinges will not work if your lid doesn’t match specified dimension and weight requirement.
Check Stock

Rockler Lid-Stay Torsion Soft Close Hinges (Pair of 2, Rustic Bronze) – 60” Pound Lid Support Hinge Soft Close Cabinet Hardware – Bronze Lid Hinge Support - Heavy Duty Hinge Hardware

  • Lid Support Hinge Heavy Duty: This torsion hinge lid support allows virtually any size lid to open smoothly, hold its position (when opened to 90 degrees, beyond that the lid will swing open), and then easily close. Use the torsion calculator to help determine your ideal lid support hinge combination..
  • Lid Stay Slow Closing: These rustic bronze lid stay torsion hinges support any size lid by simply adding more hinges & can be installed for both overlay and flush fitting lids. Doors and lids will come down slowly and softly which eliminates slamming doors or smashed fingers..
  • High Raising: These rustic bronze cabinet door supports are specially designed for safety and the design of heavy duty hinges ensure that the seat top raised position is at an over center 90-degree angle to prevent the lid from falling unexpectedly..
  • Easy Installation: Our box hinges are designed to fit 3/4" thick stock & are easy to install (instructions included). For ultra-fast and easy installation on these heavy duty industrial hinges, use our Torsion Hinge JIG IT (sold separately)..
  • Perfect Design: These soft close door hinges are the best solution for lids or flaps on furniture, cabinets, cupboards, or wooden storage boxes when a soft closing is required. hinges are available ....
Check Stock

Morinbo Lid Stay 105 Degree Open with Soft Close, Lid Support for Toy Box and Upward Top-Opening Flap Doors, Easy to Install (Pack of 1)

  • STURDY LID STAY WITH SOFT CLOSE Excellent safety solution for toy box lid and kitchen cabinets, your lids will lower slowly and gently to avoid smashing fingers. and per lid-stay support the range of door weight 3-10 lbs, Height 18-19 inch..
  • EASY TO INSTALL Comes with an exclusive original design installation card, combined with the most detailed installation video of the entire network on this page, allows you to easily complete the hinge installation..
  • LID STAY SLOW CLOSING Lid stay support built-in hydraulic dampening device. Doors and lids will come down slowly and softly which eliminates slamming doors or smashed fingers..
  • COMPACT DESIGN OF LID STAY HINGE The compact design allows for installation in tight fit areas. The lid hinges supports opening the lid at a maximum Angle of 105 degree..
  • KEEP LID HINGE STAY OPENING & WIDE USAGE Updated manual can be downloaded in Amazon page.Easy to follow installation instructions ensure a perfect install the first time! Lid stay can be installed on the left or on the right..
Check Stock

Ravaver Toy Box Hinges Soft Close, 26LBS-34LBS Heavy Duty Lid Stays 90 Degrees Open with Easy-to-Install Card, Sold in Pairs (Black)

  • GENTLE CLOSING: All-New hydraulic slow-down mechanism for improved stability and safety. The lid stay will close lid softly while holding up with sturdy support, and prevent slammed doors and smashed little fingers.
  • STRONG SUPPORT: For lid height of over 18in, handle lid weight from 13lbs to 17lbs per hinge, while 2 hinges double weight support from 26lbs to 34lbs. For lid height of over 25in, each hinge supports 7-9lbs and both hinges do 14-18lbs.
  • LOCK LID OPEN SECURELY: Hold your lid open at max 90 degrees until you are ready to push it shut. Never worry about having to prop the lid open.
  • ONLY TAKES 5 MINUTES TO GET INSTALLED by following the placement measurement card. Note: one hinge for left-hand mounting, and the other one for right-hand mounting.
  • BEFORE PURCHASING: Do not support the lid at width over 45in and height over 28in. Easy to lift and lower the top of storage chest, window seat bench, piano bench and more trunk.
Check Stock

Rockler Lid-Stay Torsion Soft Close Hinges (Pair of 2, Rustic Bronze) – 40” Pound Lid Support Hinge Soft Close Hardware for Cabinets – Bronze Lid Hinge Support - Cast-Zinc Heavy Duty Hinge Hardware

  • Lid Support Hinge Heavy Duty: This torsion hinge lid support allows virtually any size lid to open smoothly, hold its position (when opened to 90 degrees, beyond that the lid will swing open), and then easily close. Use the torsion calculator to help determine your ideal lid support hinge combination..
  • Lid Stay Slow Closing: These rustic bronze lid stay torsion hinges support any size lid by simply adding additional hinges & can be installed for both overlay and flush fitting lids. Doors and lids will come down slowly and softly which eliminates slamming doors or smashed fingers..
  • High Raising: These rustic bronze cabinet door supports are specially designed for safety and the design of these heavy duty hinges ensures that the seat top raised position is at an over-center 90-degree angle to prevent the lid from falling unexpectedly..
  • Easy Installation: Our box hinges are designed to fit 3/4" thick stock, & are super easy to install (instructions included). For ultra-fast and easy installation on these heavy duty industrial hinges, use our Torsion Hinge JIG IT (sold separately)..
  • Perfect Design: These soft close door hinges are the best solution for lids or flaps of furniture, cabinet, cupboard, or wooden storage boxes when a soft closing is required. Hin....
Check Stock

Lid Stay 105 Degree Open with Soft Close Lid Support for Toy Box and Upward Top-Opening Flap Doors Pack of 2

  • LID STAY WITH SOFT CLOSE FOR TOY BOX-- The Lid stay is made of nickel plated steel and plastic, and 2 pcs lid-stay support the range of door weight....
  • LID STAY SLOW CLOSING ---Lid stay support built-in hydraulic dampening device. Doors and lids will come down slowly and softly which eliminates....
  • KEEP LID HINGE STAY OPENING, WIDE USAGE -- Never worry again about having to prop the lid open. This lid support will hold the lid open until you are....
  • COMPACT DESIGN OF LID STAY HINGE -- The compact design allows for installation in tight fit areas. The lid hinges supports opening the lid at a....
  • EASY TO INSTALL LID SUPPORT-- Updated install instructions can be downloaded in Amazon page. Easy to follow installation instructions ensure a perfect....
Check Stock