Top Drok Usb Multimeters Reviews

Mini USB LED Light DROK 5PCS Portable Energy Efficient Kids Child Night USB Laptop Keyboard Light 5V 100mA LED Keychain Lamp Brightest LED Lamp for Emergency Security Lighting Home Decoration

  • HANDY & PRACTICAL LED LIGHT: DROK's mini usb led light is with an ultra small size (27 x12 mm) and light weight, easy to carry. The LED lamp has two 2....
  • USER-FRIENDLY KEYCHAIN DESIGN: The night light is equipped with a hole for the keychain, can be attached to your key or a lanyard..
  • CONVENIENT USB POWERD DESIGN: This USB light has a USB connector. You can easily get light from anywhere with USB port (especially for your unused USB....
  • Wide Application: The led lamp light can be widely applied to anywhere you need an extra light, such as laptop keyboard light, night light, emergency....
  • WARM TIPS: Please note that the USB nightlight is not dimmable and will generate little heating after working for long time..
Check Stock

Timer Relay, DROK Time Delay Relay DC 5V 12V 24V Delay Controller Board Delay-off Cycle Timer 0.01s-9999mins Trigger Delay Switching Relay Module with LCD Display Support Micro USB 5V Power Supply

  • DROK timer relay operating voltage range is DC 6-30V, support micro USB 5.0 V power supply.
  • support high level trigger 3.0v-24v and low level trigger 0v-0.2v.
  • timing range is 0.01s~9999mins, can be continuously adjustable..
Check Stock

Juried Engineering Microchip MCP602-I/P MCP602 Dual Operational Amplifier Op-Amp 2.8MHZ 2.3V/us DIP-8 Breadboard-Friendly (Pack of 1)

  • DROK micro voltage converter with low voltage input range DC 4.8-35V, positive and negative dual output voltage is ±15V, rated output current is 660mA..
  • APPLICATION: the step-up regulator module is suitable for sensor, operational amplifier, audio and other devices that needs positive-negative power output..
  • SMALL MODULE HIGH EFFICIENCY: DROK boost converter is with small dimension 64x27.5x12.5mm.
  • the small module conversion rate can be up to 88%..
  • TWO MOUNT METHODS: the volt transformer module not only support row pin welding, but also lead mounting, which will be convenient for your use..
  • NOTE: please note that although the module is with short circuit protective function, it can not in long continuous short circuit, or it will be damaged..
Check Stock

DROK® DC-DC Buck Converter 3.5-30V to 0.8-29V 10A Step-down Volt Adjustable Output Voltage Regulator Module Power Supply with High Accuracy Voltmeter Red Digital Tube Display

  • DROK DC buck converter input voltage range is DC 3.5~30V, output adjustable voltage range is DC 0.8~29V, max output current is 10A, conversion rate....
  • LED Voltage Meter: the step down regulator is equipped with high accuracy voltmeter, red LED display, press the key to switch display input voltage or....
  • Metal Case: DROK volt transformer is designed with metal case, can protect the module from destroying, and the case itself is a heat sink, excellent....
  • Note: please make sure that the input voltage is higher than the output voltage at least 1V.
  • please note that this module doesn't have reversed....
  • Small Size: the switching power supply module is with compact design, dimension is 85mm*58mm*33mm(L*W*H)..
Check Stock

AstroAI TRMS 6000 Counts Digital Multimeter+ Multimeter Test Leads Kit

  • ...with removable insulation, 2 X extended range plunger mini-hooks with pass-through banana plugs, 2 X heavy duty test probes, 2 X 42” lead extensions..
  • HEAVY DUTY: It is safer to test CAT III 1000V &CAT IV 600V rated current 10A current, perfectly fitting all kinds of multimeters like digital multimeters, voltmeter, clamp meters and so on..
  • COMPATIBLE: Multimeter test leads are designed for use with any multimeter, clamp meter,voltmeter or test instrument.Universally compatible with either 0.16” banana plugs or shrouded banana plugs on all ends..
Check Stock

Buck Converter 12v to 5v, DROK 5A USB Voltage Regulator DC 9V-36V Step Down to DC 5V-5.3V 5.2V 3.5-6A Volt Transformer Power Supply Module for Phone Fast Charging

  • DROK buck converter input voltage is DC 9v-36v, output voltage is 5.2V (5V-5.3V available according to your input voltage)..
  • The step down regulator adopts synchronous rectification scheme to provide wide voltage range, large current and high efficiency..
  • Our buck voltage regulator is user-friendly, accompany with DC interface and connecting terminals, make it easier to be connected to different devices..
  • The voltage reducer is with USB interface and quick charge identifying chip, and is compatible with Android and Apple..
  • Note: Input different voltage will output different power: input DC 9-24V, output 5.2V/6A/30W.
Check Stock

Pen Type Digital Multimeter, XEAST XE7 Smart Multimeter Plug and Read, Voltage Tester with Resistance Continuity Capacitance Diode NCV Live Wire Check

  • 【High Efficiency】 Single test lead design make the measurement more efficient, especially for electronic components maintenance. You no longer have to worry about the tip of the test lead moving while reading the test results..
  • 【Overload Protection】 XE7 multi-tester has anti-burn and overload protection, it prevents electrical shock.
  • it is especially suitable for beginners. When the instrument detects AC voltage, the instrument buzzer will alarm and the NCV alarm light will flash..
  • 【EBTN LCD Display】 Greatly enhance the reading experience, the lighted up numbers & letters with black background make it very easy to read, even in bright sunlight or poor light..
  • 【Multimeter Pen Type with Flashlight】 There are flashlights for you to open when you need to use this auto-ranging multimeters in a dark or low-light environment..
  • 【Easy to Carry】 Compared with other traditional multimeters, this multimeter is smaller in size and equally powerful, making it more suitable for carrying around. Comes with a storage bag for you to use together, you can store your multimeter in the bag to avert losing or scratching it..
Check Stock

AstroAI 8Pcs Multimeter Test Leads Kit,Digital Multimeter Leads with Alligator Clips and Plunger Test Mini Hooks Test Probes 1000V 10A CAT III & CAT IV 600V for Multimeter, Voltmeter, Clamp Meter

  • MULTIMETER TEST LEADS KIT: All 8 pieces with three different connectors help to test various on different occasions, including 2 X alligator clips with removable insulation, 2 X extended range plunger mini-hooks with pass-through banana plugs, 2 X heavy duty test probes, 2 X 42” lead extensions..
  • HEAVY DUTY: It is safer to test CAT III 1000V &CAT IV 600V rated current 10A current, perfectly fitting all kinds of multimeters like digital multimeters, voltmeter, clamp meters and so on..
  • COMPATIBLE: Multimeter test leads are designed for use with any multimeter, clamp meter,voltmeter or test instrument.Universally compatible with either 0.16” banana plugs or shrouded banana plugs on all ends..
  • HUMANIZED DESIGN: Removeable PVC insulation on the alligator clips protect it against dust and oxidation.Thin and sharp testing probes for easier use with very tight spaces. Longer probe tips for greater ease of use..
  • VERSATILE KIT:Soft and Durable Hand Grips, Heat,and cold-resistant test probes are silicone insulated and provides comfort and safety.All test leads complies with IEC/EN: 61010 standards..
Check Stock

KAIWEETS Soft Silicone Electrician Test Leads Kit CAT III 1000V & CAT IV 600V with Alligator Clips and Needle Probe for Fluke/AstroAI/INNOVA Multimeter Electronic Clamp Meter 9PCS

  • SECURITY LEVEL AND HEAVY DUTY - It is safe to test CAT III 1000V &CAT IV 600V rated current 10A current, perfectly fits all kinds of multimeters like clamp meters, digital multimeters, table meters..
  • UNIVERSAL COMPATIBLE - With three different connectors that can be replaced: alligator clips, needle probes and mini-hooks, makes the test leads can meet different test needs..
  • HIGH-QUALITY MATERIAL - This test leads kit is made of silicone double insulated which is durable, non-toxic, environmentally friendly, will not be stiff after 24 hours in the refrigerator.
  • with the 48" wire is perfect for any multimeter and clamp meter..
  • WIRE CORE - Composed of 105pcs 0.001mm copper wires and nylon yarn give the test leads kit excellent Tensile strength and bending resistance, low resistance, electrical conductivity, it is good helper for electricians and electronic product repairers..
  • QUALITY - We use high-quality materials ensures that the test leads are durable, flexible, and resistant to freezing and heat. It can withstand low temperatures of -68℉, won't become stiff during the winter. Please feel free to contact us if you have any concerns. We provide 36-Month after sale service..
Check Stock

Fluke - FLUKE-IR3000FC IR3000FC Infrared Connector for Connect

  • Infrared connector for use with Fluke 189, 289, and 789 multimeters (sold separately).
  • Allows wireless data transfer to iPhone or Android smart phone (sold separately).
Check Stock

Fluke i400 400 Amp AC Current Clamp

  • Companion to a digital multimeters to measure up to 200A AC.
  • 1mA per amp output guarantees easy reading on you meter.
  • Take accurate current readings without breaking the circuit.
  • Maximum conductor diameter 20mm, CAT III 600V safety rating.
  • Companion to your DMM to measure up to 400 A AC.
Check Stock

Fluke PV350 Pressure Vacuum Module

  • Compatible with all Fluke and most popular digital multimeters.
  • Digital pressure and vacuum measurements in a single module.
  • Transducer sealed in 316 stainless steel compatible with variety of liquids and gases.
Check Stock

TPI A110 UL Ceramic Fuse 10 Amp 600V For 100 Series Digital Multimeters Pack of 2

  • For use with 100 series digital multimeters.
Check Stock