Top Drill Dia 50mm Reviews

Utoolmart Chucking Reamer 3/4\

Specifications: Cutting dia.: 3mm / 0.12".
accuracy: H7. Tungsten carbide tool is hardened to 50HRC, good for general purpose applications.
Uncoated Tool: Features just the base substrate without any additional treatment or coatings. Heat treated and quenched for stable performance, suitable for wide ranges of applications.
Round Shank: Can be used with a wide variety of tool holding systems. Good for use in through or blind holes and used for light cut, repair work, removing stock.
Features: Straight flute tool allows chips to collect in the flutes when cutting, well suited for applications in shallow cuts. Tungsten carbide reamer is with high hardness and strong wear resistance for long service life.
Application: Designed for accurate reaming in stainless steel, alloy steel and other metal materials, used on equipment including screw machines, turret lathes, drill presses and machining centers.

Check Stock

Tuanie Lnanqing-Seal Washer E-Type Circlips Carbon Steel M1.5 M2 M2.5 M3 M3.5 M4 M5 M6 Retaining Lock Washers for Shafts 65 Manganese Steel, Firmly and Durable (Inner Diameter : M6)

Price For: Each Prongs: - Clearance Dia. Free O.D.: - Height: - Item: Standard Retaining Ring Radial Wall: - Tensile Strength (PSI): 150, 000 Type: Internal Material: Stainless Steel Finish: Plain For Bore Dia.: 20mm Free O.D.: 21.50mm Thickness: 1mm Thickness Tolerance: -0.060mm Fits Groove Dia.: 21.00mm Groove Dia. Tolerance: +0.13mm.
Fits Groove Width: 1.10mm Fits Groove Depth: 0.50mm Clearance Dia. (Expanded): - Hole Dia.: 2mm Tensile Strength (PSI): 150, 000 Rockwell Hardness: RC47-51 Meets/Exceeds: DIN472 Country of Origin (subject to change): United States.

Check Stock

Metric M42 8% Cobalt Twist Drill Bits Set for Stainless Steel and Hard Metal (1mm-10mm/19pcs)

Premium M42 8% Cobalt Steel ,68-70 HRC (Rockwell Hardness Scale) ,Usually Give the Best Heat,Wear and Chip Resistance and Long Tool Life..
3 Steps Desigh for Cutting through Stainless Steel,Hard Metals,Aluminum,Plastic..
This Cobalt Drill Bit is Typically Capable of Running Three to Five Times Faster.Despite the Higher Price,the Cost Per Hole When Using Cobalt Drill Bit Will be the Lowest,Since It Can Produce So Many More Holes..
The Sufficiently Sharp Bit Edge Can Cut the Metal Material into Long Strips of Iron Chips rather than Slowly Grinding Throng the Material with a Blunt Drill Bit..
19Pcs 135 Degree Split Point Drill Bits Includes :1mm(length:3.4cm) 1.5mm 2mm 2.5mm 3mm 3.5mm 4mm 4.5mm 5mm(length:8.5cm) 5.5mm 6mm(length:9cm) 6.5mm 7mm 7.5mm 8mm(length:11.5cm) 8.5mm 9mm 9.5mm 10mm(length:13cm) [DIA 0.5mm Increments] ..

Check Stock

K Kwokker Tungsten Carbide Burr Set 1/8 Shank Diamond Files HRA85 Rotary Tool Accessory Kit, Drill Chucks Accessories for Dremel Rotary Drill Air Die Grinder for Metal Polishing, Wood Carving

√ [1/8" Shank 1/4" Cutting Dia Carbide Rotary Burr Set] K Kwokker 10Pcs Carbide Die Grinder Bits. Shank dia: 3mm(1/8"), Cutting dia: 6mm(1/4"), fits dremel tool accessories and most small rotary tools. 10 different types of carving kit drill bits, meet your different needs..
√ [Hardness HRA85, Very Well Made And Tough As Nails, Nice Tungsten Carbide] Carbide burr set made of heat-treated durable carbide that lasts long working life, packed with nice plastic case for safety storage and protection..
√ [Safe And Efficient, Like a Hot Knife Thru Butter] VERY IMPORTANT: SINGLE-SLOT Tungsten carbide burrs drill bits, BEST FOR: Metal, cast iron, cast steel, carbon steel, alloy steel, stainless steel and so on.
GOOD FOR: wood, marble, jade, ceramic, glass etc. NOT FOR: EPOXY. PLEASE USE ROTARY BURR SET ON THE CORRECT MATERIAL TO AVOID DAMAGE TO THE PRODUCT DUE TO INCORRECT USE..
√ [This Is a Essential Rotary Burr Set] Grinding head for air die grinder. NOTE: When using the wood carving bits, make sure that the burr handle is fully inserted into the chuck and tightly clamped. Eye masks and gloves are reco....

Check Stock

uxcell Flexible Extension Screwdriver Bit Holder Magnetic Extention Hex Shaft Screw Drill Connection Tip,6.7-inch Flex Shaft,1/4''-Hexagon Drill

Features -- Total Size: 170x13mm/6.7 x 0.51-inch(L*Max. Dia.).
Size -- Connection hex shank drill site size (6.35mm) (1/4) 0.25-inch.
Connecting parts of the batch Hex size (6.35mm) (1/4) 0.25-inch..
Material -- This flexible shaft is made of carbon steel and plastic which make it practical and durable..
Widely compatible -- This extension shaft is for Small wrench, cordless screwdriver, low speed DC hand drill, pneumatic screwdriver, torque drill, electric screwdriver..
Widely used -- Bends,twist and turns to use drill into tight and confined spaces. Suitable for ordinary hand drill and electric drill with perfect performance. Applied to hardware maintenance and repair, including computer chassis, electrical cabinets, furniture, electrical appliances, etc..

Check Stock

HAYEAR Hevey Diameter Dia 50mm Adjustable Monocular Gear Zoom Video Microscope Stand Part Holder Support Ring 25mm

Will Fit Scope Heads with Diameter of 50mm.
Easy Large-Sized Focusing Knobs on Both Sides of Focusing Holder..

Check Stock

Sadlak Industries M14 Aluminum Scope Mount

The aluminum edition is machined from CNC from a density of ½ aircraft quality aluminum (6061), treated using heat. The material which is denser as....
Extra Big Wrench For gas cylinders created abroad, we provide an edition which is extra big, just in an aluminum thickness of ½ and olive drab color..
Drill Set for Cleaning The drill set for cleaning consists of drill 180 dia No. 15 and .323 dia Letter ‘P’ for rubbing off carbon deposits from....
Plug Cleaning Drill for Gas Cylinder (Dia .316 Letter ‘O’ Drill) Following extraction of the gas plug by utilizing Gas Cylinder Wrench from Sadlak....

Check Stock

Rannb 90mm/3.5' Hole Saw for Cutting Wood Plywood Laminated PVC Board

⭐【Material】Features heat treated carbon steel alloy hole saw blade, non-binding clean edge design.The blade is sharp with high hardness..
⭐【Dimension】Cutting Dia: 90mm /3.5".
⭐【Application】This Hole Saw Drill Bit is designed for wood / plastic cutting.
It can effectively and economically cuts a wide variety of materials including aluminum, iron and wood..
⭐【Convenience】The spring on the drill bit is nice because it automatically pushes the disc out of the saw immediately after completing the hole..
⭐【Package Content】1pcs x Shank + 1pcs x Hole Saw + 3pcs x Pilot Drill Bit + 1pcs x Small L Wrench.

Check Stock

Geevorks Spotting Drill Bit M42 HSS High Speed Steel Drill Bit Set,7PCS 90 Degree Drilling Chamfering Tool - 3 4 5 6 8 10 12mm

7PCS Spotting drills with 90 degree angle..
Drill Dia: 3mm / 4mm / 5mm / 6mm / 8mm / 10mm / 12mm..
M42 High speed steel drill bit,high temperature and abrasion resistance, long service life..
Positioning and chamfering can be finished by one time..
The holes made by these drills are not easy to cause edge breakage..

Check Stock

ASNOMY 12PCS TCT Hole Saw Kit for Hard Metal, 5/8\-2-1/8\ Inch Tungsten Carbide Tipped Hole Cutter Set for Stainless Steel, Hole Saw Set for Metal,Steel, Iron, Wood, Plastic

...ted carbide Tooth, ensuring its high hardness, rust proof, sturdy and durable；.
【Imperial Size】Cutting diameter：5/8"(16mm)，3/4"(19mm), 7/8"(22mm), 1"(25.5mm),1-1/8"(29mm), 1-1/4"(32mm), 1-3/8"(35mm), 1-3/4"(45mm), 2"(51mm), 2-1/8"(54mm), Cutting Length: 25mm(1Inch), Shank Dia.: 10mm(2/5 Inch) , perfect for drilling Hard Metal.
【Unique Three-blade Design】 This TCT hole Saw teeth designed with Three-blade, Include outer blade, middle blade, and inner blade, making it sharper and more efficient, ideal for cutting hard metals.
【Multipurpose Tools】This Hole saw set apply to Bench drill, magnetic drill, gun drill, drill percussion and so on. Perfect for hard metal, stainless steel plate, square tube, iron, cast iron, wood, F.R.P and other general sheet metal；Note: Cannot be used for concrete, tiles and stone..
【High precision and Easy to Use】TCT Carbide Steel teeth for fast cutting of clean, round holes. Suitable for hand held electric drill, stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine.
【Package】Include 10pc T.C.T Hole Saw set and 2pcs Extra Titanium-Plated Pilot Drill bit, 2pcs hex wrenches, All the drills are packed in an exquisite Storage box, and each bit is also oiled (Prevent rust), ....

Check Stock

M12-1.75 x 50mm Zinc-Plated 12.9 Alloy Steel Socket Head Cap Screw 50 pk.

Price For: Each Drive Type: Hex Socket System of Measurement: Metric Dia./Thread Size: M12-1.75 Screw Style: Socket Head Cap Screw Thread Dia.: M12 Fastener Thread Type: Metric Coarse Thread Direction: Right Hand Material Grade: Class 12.9 Item: Metric Socket Head Cap Screw Vented Hole Size: Not Vented Basic Material: Steel Min. Tensile Strength: 176, 900.
Head Height: 12mm Head Dia.: 18mm Rockwell Hardness: C39 to C44 Thread Style: Fully Threaded Screw Head Type: Cylindrical Thread Length: 50mm Screw Industry Standards: DIN 912 Drive Size: 10mm Fastener Finish: Zinc Plated Length: 50mm Country of Origin (subject to change): Multiple.

Check Stock

ASNOMY 12PCS TCT Hole Saw Kit for Hard Metal, 5/8\-2-1/8\ Inch Tungsten Carbide Tipped Hole Cutter Set with Titanium-Plated Pilot Drill bit for Metal, Stainless Steel, Iron, Wood, Plastic

...ed cemented carbide Tooth, ensuring its high hardness, rust proof, sturdy and durable；.
【Size】Cutting diameter：16mm (5/8")，19mm(3/4"), 22mm(7/8"), 25.5mm(1"),29mm(1-1/8"), 32mm(1-1/4"), 35mm(1-3/8"), 45mm(1-3/4"), 51mm(2"), 54mm(2-1/8"), Cutting Length: 25mm(1Inch), Shank Dia.: 10mm(2/5 Inch) , perfect for drilling Hard Metal.
【Unique Three-blade Design】 This TCT hole Saw teeth designed with Three-blade, Include outer blade, middle blade, and inner blade, making it sharper and more efficient, ideal for cutting hard metals.
【Multipurpose Tools】This Hole saw set apply to Bench drill, magnetic drill, gun drill, drill percussion and so on. Perfect for hard metal, stainless steel plate, square tube, iron, cast iron, wood, F.R.P and other general sheet metal；Note: Cannot be used for concrete, tiles and stone..
【High precision and Easy to Use】TCT Carbide Steel teeth for fast cutting of clean, round holes. Suitable for hand held electric drill, stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine.
【Package】Include 10pc T.C.T Hole Saw set and 2pcs Extra Titanium-Plated Pilot Drill bit, 2pcs hex wrenches, All the drills are packed in an exquisite aluminum box, and each bit is also oiled (Prevent rust),....

Check Stock

Tungsten Carbide Alloy Hole Saw Cutter Kits for Metal, TcnoMreol 9pcs Hole Saw Bits Sets Hole Cutter Tool for Stainless Steel, Steel Plate, Copper, Aluminum Alloy Cast Iron 12~42 MM(24/51~1-13/20 in)

Material: Made of high quality TCT carbide alloy, strong and durable, high hardness, anti-rust. Also built tungsten steel center drill, precise positioning and very durable.
Lengthening-stem designed: These metal hole saw kits come with Lengthening-stem, total length can up to about 90mm(3-27/50”), make sure there is much longer working distance, it possible to punch holes in narrow corner..
High efficiency: Designed with center drill bits, precise positioning, hole saw made of precision ground, with sharp tough gears, wear-resistant, and chip removal easily and smoother cutting edges..
9 of kits: Diameter, 12mm(24/51”), 15mm(11/20”), 18mm(7/10””), 20mm(19/24”), 22mm(6/7”), 25mm(49/50”), 30mm(1-9/50”), 35mm(1-19/50”), 42mm(1-13/20”) hole saw kits, and 9pcs spring and Allen wrench. You can choose the most suitable size to make a hole..
Widely using: These TCT hole saw sets can use on stainless steel plate(less than 3MM(3/25”), Copper, Aluminum Alloy Cast Iron(less than 10mm(13/33”)), etc. And these hole cutter kits can working with bench drill, magnetic drill, electric hand drill, etc..

Check Stock