Top Drill Bit For Hard Metal Reviews

13 PCS Metric M35 Cobalt Steel Twist Drill Bit Set HSS Extremely Heat Resistant with Straight Shank to Cut Through Hard Metals Like A Hot Knife Through Butter,Such as Stainless Steel,Titanium Alloy

✅ Faster Cutting and Longer Life— Our Twist Drill Bit HSS are Manufactured from M35 cobalt steel, with molybdenum and cobalt added to creates a hardened alloy, measuring Rockwell hardness up to 67, for much faster cutting and extra longer life span, with up to 12 times when compared with an average HSS drill bit..
✅ No Center Punch Is Needed—The 135° Quick-Cut points are self-centering and penetrate quickly with less pressure. Twist drill bit kit Will not "walk" or "wander".
✅ Extremely Heat Resistant — twist drill bits Must be used and operated at 1500 RPM or greater for maximum efficiency. Straight shank allows for firmly holding and accurate centering, fit for standard drill chucks and regular round collet chucks.
✅ Metal Cutting — Drilling Steel, Stainless Steel, Hard Metal and Iron.Particularly successful in cutting through hard metals such as hard metal ,stainless steel and cast iron, although they can be used for softer materials, too.
✅ Easy Usage And Store —The set includes 13pcs of M35 cobalt steel twist drill bits: 1.5mm, 2mm, 2.5mm, 3mm, 3.2mm, 3.5mm, 4mm, 4.5mm, 4.8mm, 5mm, 5.5mm, 6mm, 6.5mm,13Pcs Packed in a Plastic Bag For Easy Usage And Store.

Check Stock

4 inch Deep Hole Saw Carbide, 2.36” Cutting Depth for Multiple Material Hardy Plank MDF Wall Tile 10X More cuts 5X More Faster

1, The Carbide Tipped Teeth hardness HRC overs 80. It’s more hard, more shape, longer life. Up to 10X times more Cuts than standard bi-metal hole saw drilling for Hardy plank. Up to 5X times more Speed than standard bi-metal hole saw drilling for Hardy plank..
2, The big slot design is to remove the plug easily. Up to 5 times Faster than standard hole saw..
3, Max cutting depth:2.36 “( 60mm) . Replaced the following drill bits: Spade bit, Forstner bit, Auger bit, bi-metal hole saw..
4, Ideal drilling for multiple materials: Hardy Plank, Hard wood（not with nail), Drywall, MDF, Fiberglass, Wall Tile, Air Brick, Plasterboard. Cutting material MOHS hardness ：Not up to 6 . For use in standard rotary drills. Not for use in Hammer mode..
5，This carbide hole saw cutter includes: 4”(102mm) carbide tipped hole saw , 1 of 0.34”(8.6mm) hex shank arbor, 1 of Ø1/4”x4.3”(110mm) silver HSS pilot drill bit for wood. 1 of Ø1/4”x4.3”(110mm) carbide tipped pilot drill bit for hardy plank, stone, wood..

Check Stock

wesleydrill 11/16\ Reduced-Shank Drill Bit 1/2 Inch Shank Silver and Deming Industrial Drill Bit Fit for Home DIY and General Building/Engineering/Woodworking

[Specifications and packaging]: 1 Pc reduced-shank drill bit and 1 pc plastic tube.Include Size:11/16"..
[Fitment]: Hss drill bit set for metal/ wood/ plastic. Suitable for home DIY, and general building/engineering/woodworking use..
[Material]: Metal drill bit used high speed steel M2 black and gold, resists corrosion, ensures outstanding durability, sharpness and capability, reduces the friction and runs cooler..
[Advantage]: Industrial drill bit increases cutting speed with self-centering and prevents walking, clears chips and particles faster. The split point tip can increase the wear resistance..
[Special Design 135-Degree]: Cobalt drill bit 135-degree penetrates hard material without a pilot hole and produces small chips to reduce clogging..

Check Stock

6 Inch HSS BI Metal Hole Saw Cutter 1-1/2" Depth with Big Arbor for Wood Metal

2,Longer life: Can drill 30 holes(up to) in 0.12" low carbon steel plate..
3, Bi-metal strip is made by laser welding machine and vacuum heat treatment, providing better hardness, strength, and longer life..
4, Ideal for Wood, Plasterboard, PVC, MDF, Drywall, Aluminum, Thin Metal, Thin Stainless Steel..
5, Package: 1 of 6” 152mm hole saw bit. 1 of 0.43” hex shank large mandrel , 1 of 3.5" silver HSS pilot drill bit for wood ,soft metal. 1 of 3.5" black HSS pilot drill bit for hard metal..

Check Stock

5PCS Combination Drill Tap Bit Set Screw Tapping Hex Shank HSS Metric/Imperial Plug Drill Bits Hand Tools 1/4-20NC

★【Combination Drill Tap Bit】6Pcs Combination Drill and Tap Bit, Inculued 6-32NC, 8-32NC, 10-32NC, 10-24NC, 12-24NC, 1/4-20NC.
★【Quality Material】Made of High-speed Steel 4341, Hard, Rustproof, Solid and Durable.Bonderizing Surface protects the metal from corrosion. Improve the finish adhesion and corrosion resistance. High quality, long lasting and durable..
★【Working Efficiently】These Combination Drill Tap Bit complete hole drilling, tapping, deburring and countersinking in one operation save processing steps and time costs, improve working efficiency..
★【Perfect Design】1/4 inch Hex Shank,quick change for cordless drill. Back tapered beyond tap to prevent thread damage from over-drilling, And self-centering point, do not need assistant center drilling or center punching..
★【Widely Application】Suitable for Low Hardness Materials Such as 10-gauge wood, plastic copper, brass, aluminum, sheet metal and other soft materials. They are not suitable for drill and tap in very hard metals..

Check Stock

wesleydrill 9/16\ Reduced-Shank Drill Bit 1/2 Inch Shank Silver and Deming Industrial Drill Bit Fit for Home DIY and General Building/Engineering/Woodworking

[Specifications and Packaging]: 1 Pc reduced-shank drill bit and 1 pc plastic tube.Include Size:9/16"..
[Fitment]: Hss drill bit set for metal/ wood/ plastic.Suitable for home DIY, and general building/engineering/woodworking use..
[Material]: Metal drill bit is made of high speed steel M2 black and gold, resists corrosion, ensures outstanding durability, sharpness and capability, reduces the friction and runs cooler..
[Advantage]: Industrial drill bit Increases cutting speed with self-centering and prevents walking, clears chips and particles faster. The split point tip can increase the wear resistance..
[Special Design 135-Degree]: Cobalt drill bit 135-degree penetrates hard material without a pilot hole and produces small chips to reduce clogging..

Check Stock

10PCS 1/4 Inch carbide drill Tile Glass bit for Glass, Concrete, Marble, Plastic, Brick, Tile, Wood and Cement,etc

【HIGH HARDNESS, DURABLE】High quality Tungsten carbide, and carbide with a reinforced head that prevents bit cracking and provides a longer life,the hardness is higher than the ordinary drill bit..
【UNIQUE DESIGN】One drill bit replaces two drill bits (1 x glass & tile drill bit + 1 x Masonry drill bit), can easily drill holes on tile, concrete, brick, glass, ceramic, plastic, wood, etc.The U type slot design brings fast drilling dust remove, and 3-flats shank allows drill bit easy plug and to be held tightly..
【WIDE APPLICATIONS】Spear pointed design strong tungsten carbide tip can easily penetrate various material, suitable for masonry wall, cement wall, concrete, tile, wood, metal, stainless steel, aluminum alloy, wood, bubble brick, etc..
【10-PIECE DRILL BIT SET】The package includes 10pcs 1/4 Inch (6mm) glass and tile drill bits and a plastic storage box, easy to carry..
【NOTE】When drilling hard material (glass, porcelain floor tile, marble or granite), please use water for lubrication..

Check Stock

OXMUL Step Drill Bits for Metal, 3/16 to 7/8, M2 HSS, Duty for Stainless Steel, Mild Steel, Hard Metal, Aluminum, Wood, Copper, PVC, 12-Steps. 2-Spiral-Flute. #201

[M2 HSS Coated] Made of M2-Coated HSS, this stepped Drill Bit have 5X Longer Life of Regular Drill Bit. This Step Bit drill 2X Faster for Stainless Steel, Hard Metal, Mild Steel, Galvanized Steel, Aluminum,Iron, Wood Plate, PVC and Copper. If you want to drill faster and many holes on metal, then please choose this step drill bit.
[Duty for Stainless Steel] A test. Drill in 1.3mm thick Stainless Steel square pipe. This Step Drill bit successfully drilled 12 holes. But another Titanium Step Drill only drilled 1 holes, then blunt.
[12 Steps & 2-Spiral Flute] Drills 12 different hole sizes, from 3/16", 1/4", 5/16", 3/8", 7/16",1/2", 9/16", 5/8", 11/16", 3/4" 13/16" to 7/8". 2-Spiral Flute:Clears Chips faster.
[118° Split Point Tip] Split Point tip prevents "walking," gets fast starts, and eliminates the need for pilot/starting hole.
[3/8" Tri-Flatted Shank] Fits into power tools chuck securely and eliminates slip.

Check Stock

Yougfin Step Drill Bits with Automotive Center Punch,Unibit Titanium Coated High Speed Steel Step Bit Set for Hole Drilling,50 Sizes with Aluminum Case for DIY Lovers,5+1pcs

【High Quality Material】：High-speed steel, also known as HSS, is the most common drill bit for metal applications. It incorporates an element with titanium that makes the drill bit harder than a typical HSS bit and thus suitable for sheet metal working and are ideal for cutting non-ferrous metals, plastic, wood board, etc.
【Extra Automatic Center Punch】：You know how when you try to drill into metal or hard surfaces and your drill bit "walks" no matter how much you think it's steady? Yeah, we have a tool for that. The automatic center punch has a heavy-spring action, and you simply place the tip where you want to drill, and it punches a slight indentation in the surface. Just enough so that the drill bit won't walk.
【118° Split Point】：These step drill bits have a small point angle of 118° and require less pressure when centering in the material. The point starts drilling at contact, reducing friction, pressure, and heat. The larger the point angle, the higher the contact pressure and the centering in the material requires more pressure.
【Double Flutes & Tri-Flatted】：These drill bits feature a special dual flute straight design for dependable performance and durability. And the shanks on these step drill bits have three f....

Check Stock

JCB Tools 4 Piece Multi Purpose Drill Bit Set | Carbide Tipped 5/32\

4 PIECE MULTI PURPOSE DRILL BIT SET: Whether you use these drill parts for home improvement or professional work, JCB have you covered! All the power drill essentials for precise work are included in this set to give you a home tool kit that you can rely on. Invest in this kit if you want a metal, wood, concrete, ceramics or a masonry drill bit set to add to your current collection. this is even the perfect home tool kit with case!.
HIGH QUALITY SET INCLUDES: Size of drill bits included: 4, 5, 6 and 8mm, having choice with bit sizes in ideal when engaging in different tasks. Each of these parts are designed with a precision ground flute for improved drilling performance and control, the carbide tip construction also increases durability and service life to give you a lasting drill bit set for metal and other materials..
SUITABLE FOR DRILLING A RANGE OF MATERIALS: This drill set functions incredibly on a range of materials such as wood, masonry, UPVC, ceramics, concrete and wood! Having a multi material drill bit is ideal for first apartment necessities as you never know what will need fixing next! JCB provide you with a highly robust set of drill parts so that you can get the desired results on your household or professional projects..

Check Stock

ASNOMY Tungsten Carbide Tipped Hole Saw Drill Bit for Hard Metal, 3/4 Inch T.C.T Hole Saw Cutter with 2pcs Titanium-Plated Pilot Drill bit for Metal, Steel, Iron, Wood, Plastic

【Top Quality】Made from high quality TCT Carbide( Tungsten Carbide Tipped Cutters), High-grade Titanium-plated cemented carbide Tooth, ensuring its high hardness, rust proof, sturdy and durable；.
【Size】Cutting diameter：3/4Inch, Cutting Depth: 1Inch, Shank Dia.: 2/5 Inch(10mm) , perfect for drilling Hard Metal.
【Unique Three-blade Design】 This TCT hole Saw teeth designed with Three-blade, Include outer blade, middle blade, and inner blade, making it sharper and more efficient, ideal for cutting hard metals.
【Multipurpose Tools】This Carbide Hole saw set apply to Bench drill, magnetic drill, gun drill, drill percussion and so on. Perfect for hard metal, stainless steel plate, square tube, iron, cast iron, wood, F.R.P and other general sheet metal；Note: Cannot be used for concrete, tiles and stone..
【High precision and Easy to Use】TCT Carbide Steel teeth for fast cutting of clean, round holes. Suitable for hand held electric drill, stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine.
【Package】Include 1pc T.C.T Hole Saw Cutter and 2pcs Titanium-Plated Pilot Drill bit，each hole cutters are individually cased in plastic box and each bit is also oiled (Prevent rust)..

Check Stock

Lichamp 13PCS HSS Cobalt Drill Bits Set 1/16″ to 1/4″ with Three Flute for Hard Metal, Hardened Stainless Steel and Cast Iron

UNIQUE 3X FLUTE DESIGN – Lichamp three flute patent design drill bit clears chips and particles faster, provide you with more efficient drilling experience..
4X LIFESPAN MATERIAL – Made from industrial grade M35 high-speed steel with 5% cobalt provides hardness for wear resistance, withstands max 1100 degreeF..
MULTIPLE APPLICATION – Ideal for drilling in heavy-duty tough metal, including hard abrasive alloy metal, hardened stainless steel or cast iron..
SMOOTHLY DRILLING – 135-degree split point tip & twist design increases cutting speed with self-centering and prevents skating starts or walking..
13PCS DRILL BIT SET – Metal index case with size chart for easy bit access and identification. Includes drill bit sizes 1/16-inch to 1/4-inch in 1/64-inch increments..

Check Stock

ASNOMY Tungsten Carbide Tipped Hole Saw Drill Bit for Hard Metal, 4 Inch T.C.T Hole Saw Cutter with 2pcs Titanium-Plated Pilot Drill bit for Metal, Stainless Steel, Iron, Wood, Plastic

【Top Quality】Made from high quality TCT Carbide( Tungsten Carbide Tipped Cutters), High-grade Titanium-plated cemented carbide Tooth, ensuring its high hardness, rust proof, sturdy and durable；.
【Size】Cutting diameter：4 Inch (100mm), Cutting Depth: 1Inch, Shank Dia.: 2/5 Inch(10mm) , perfect for drilling Hard Metal.
【Unique Three-blade Design】 This TCT hole Saw teeth designed with Three-blade, Include outer blade, middle blade, and inner blade, making it sharper and more efficient, ideal for cutting hard metals.
【Multipurpose Tools】This Carbide Hole saw set apply to Bench drill, magnetic drill, gun drill, drill percussion and so on. Perfect for hard metal, stainless steel plate, square tube, iron, cast iron, wood, F.R.P and other general sheet metal；Note: Cannot be used for concrete, tiles and stone..
【High precision and Easy to Use】TCT Carbide Steel teeth for fast cutting of clean, round holes. Suitable for hand held electric drill, stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine.
【Package】Include 1pc T.C.T Hole Saw Cutter and 2pcs Titanium-Plated Pilot Drill bit，each hole cutters are individually cased in plastic box and each bit is also oiled (Prevent rust)..

Check Stock