CD Products 1/4\ Horseshoe Shims - 150 Piece Black Shims
- Includes eight 1/8" shims and two 1/16" shims.
Top Drill Alignment Shims Reviews
Big Gator Tools V-Drill Guide, Standard Sizes 3/8' to 1/2'
- Universal & portable V-Drill guide provides perpendicular alignment of drill bits on flat, round and square cornered materials.
- Includes 9 standard drill sizes: 3/8", 25/64", 13/32", 27/64", 7/16", 29/64", 15/32", 31/64", 1/2".
- Heat treated nickel alloy steel provides durability & accuracy.
- Precision ground base provides perpendicular alignment of drill bit on flat materials.
- V-Groove aligns drill bits on round and square cornered materials.
DEOYUEND Cabinet Clamps, Cabinet Claw Cabinetry Clamps Cabinet Installation Clamps Cabinet Tools with Two Side Screws and Alignment Plate, 2 Pack, Orange
- 【Cabinet Clamps】Cabinet Clamps made of primary steel and with steel sliding T-bars and an aluminum alignment plate, the cabinet clamp’s body and the side jaw are cast steel for long-term durability and tightness..
- 【Dimensions】The cabinet clamps work on stiles from 1-1/2 inch to 2 inch thickness(each) with 4" opening capacity.
- 【Anti-slip Mat】Cabinet Face Frame Clamps Tools is equipped with 3 rubber protection pads for the clamping surface and the alignment plate to avoid damage to the cabinet during installation.Face frame stiles can be tightened, aligned, pre-drilled and fastened while the clamp remains in its original position..
- 【Movable Drill Guide Hole】The drill guide hole can be moved up and down. Both sides of the drill guide hole are laser-marked metric and inch scales, to pre-drill and drill the pilot hole more accurately and effectively..
- 【Easy to Install】 Cabinet claw can easily tighten and align the two door ....
Big Gator Tools MDG1000NP V-Drill Guide
- Universal & portable V-Drill guide provides perpendicular alignment of drill bits on flat, round or square materials.
- Includes 17 metric drill sizes: 3mm, 3.3mm, 3.5mm, 4mm, 4.2mm, 4.5mm, 5mm, 5.5mm, 6mm, 6.5mm, 6.8mm, 7mm, 7.5mm, 8mm, 8.5mm, 9mm, 9.5mm.
- Heat-treated nickel alloy steel provides durability & accuracy.
- Precision ground base provides perpendicular alignment of drill bit on flat surfaces.
Big Gator Tools BGT V-4 Pack V-Drill Guide SAE + Number Hole Sizes 4pc Kit
- Includes: (1) STD500NP, (1) STD1000DGNP, (1) STD2000DGNP & (1) SDGMINI.
- Special nickel alloyed steel heat treated for durability. Non-plated material with light oil coating to prevent rust..
- Centers the holes on pipes, dowels & outside corners. Flat side allow 90° drilling into flat surfaces-just clamp and drill.. Automatically squares up the drill with the surface. Alignment marks on both sides, to line up on center..
- Bottom surface is precision ground to ensure stability & accurate perpendicular alignment on flat surfaces. Round stock hole alignment marks on one side..
- Prevents drill bit wander. Portable, pocket-sized and housed in a handy plastic storage case w/surface ridges to prevent opening, PegBoard-Friendly. Only shipping one of each V-Drill Guides "NO" other tools or ruler included.
10 PCS Wedges and Feather Shims, 5/8 Inch Stone Splitter, Heavy Duty Stone Splitting Tools for Rocks
- HEAVY DUTY STEEL MATERIAL - Made of heat-treated premium steel, the 5/8 inch wedge and feather shims are strong, durable, impact-resistant, and have excellent strength, stable performance and long service life..
- PROFESSIONAL TOOL - Just drill a hole in the stone or rock and remove the residual powder in the hole. Then put the wedge and feather shims into the hole, and finally split the stone with a hammer. Through the pressure from the inside out, the wedges can exert amazing power to help you split the rock or stone..
- VALUE FOR MONEY - You will get 10 sets of wedge and feather shims. Each set includes a rubber ring, a central wedge and two shims. They are suitable for holes with a diameter of 5/8 inches..
- WIDE RANGE OF APPLICATIONS - The Stone Splitting Tools can be widely used to split hard stones, rocks, granite, marble, concrete and more. Note: Please take necessary protective measures before use. When the stone is about to split, please keep alert..
- MONEYBACK GUARANTEE - We promises to provide you with a refund if you find any issue with our products in 30 days, so that you can rest assured that you make the right choice. If you have any questions regarding our stone splitter, please feel free to contact us, and we will make sure to provide the best....
Big Gator Tools STD Series 3PC V-Drill Guide w/35 SAE Hole Sizes 1/8' - 5/8' 3PC Set
- Includes: (1) STD500NP, (1) STD1000DGNP & (1) STD2000DGNP Special nickel alloyed steel heat treated for durability. Non-plated material with light oil coating to prevent rust..
- Centers the holes on pipes, dowels & outside corners. Flat side allow 90° drilling into flat surfaces-just clamp and drill..
- Automatically squares up the drill with the surface. Alignment marks on both sides, to line up on center..
- Bottom surface is precision ground to ensure stability & accurate perpendicular alignment on flat surfaces. Round stock hole alignment marks on one side..
- Prevents drill bit wander. Portable, pocket-sized and housed in a handy plastic storage case w/surface ridges to prevent opening, PegBoard-Friendly..
6PCS Rock Splitting Wedges and 1PCS Rotary Hammer Drill Bit, Wedge and Feather Shims, Stone Splitter Tools for Granites, Concretes, Boulders, Volcanic Rocks, Limestone Rocks
- ...the better these wedge and feather shims will work. These versatile stone splitter can make your life simple and easy..
- 【SUITABLE SIZE】The size of the wedge and feather shims is 16 x 125mm/0.63 x 4.92 inch, the fit hole diameter of the stone splitter tool is 5/8''. The drill bit and rock stone splitter complement each other perfectly. The wedge and feather shims are the right size..
- 【CUSTOMER SERVICE】We will provide good after-sales service for customers. If there are any problems with our rock splitting wedges, please contact us. Hope our wedge and feather shims can bring you fun. Moreover, we will be appreciated it if you can share your user experience with the rock stone splitters with us and give us some advice to improve the stone splitting wedges..
6PCS Rock Splitting Wedges and 1PCS Rotary Hammer Drill Bit, Wedge and Feather Shims, Stone Splitter Tools for Granites, Concretes, Boulders, Volcanic Rocks, Limestone Rocks
- ...ders, rocks and so on. The harder the rock, the better these wedge and feather shims will work. These versatile stone splitter can make your life simple and easy..
- 【SUITABLE SIZE】The size of the wedge and feather shims is 14 x 125mm/0.55 x 4.92 inch, the fit hole diameter of the stone splitter tool is 9/16". The drill bit and rock stone splitter complement each other perfectly. The wedge and feather shims are the right size..
- 【CUSTOMER SERVICE】We will provide good after-sales service for customers. If there are any problems with our rock splitting wedges, please contact us. Hope our wedge and feather shims can bring you fun. Moreover, we will be appreciated it if you can share your user experience with the rock stone splitters with us and give us some advice to improve the stone splitting wedges..
1/4' Beadlock® Tenon Stock, (25) 1-1/2' Pieces
- So Fast, So Easy, So Accurate. The arms of self centering dowel jig jig are an always-reliable parallelogram that never fails to find dead center. Simply align the precision-machined notch on the jig's center bar with the dowel location mark on your board, hold the jig and drill..
- The second alignment feature lets you drill a series of equally spaced holes along the edge of a board. Just attach the supplied pin in the center bar, insert the pin in a hole and drill more holes..
- Attach the jig's adjustable center bar end-stop for drilling two or three precisely spaced end grain holes. This feature allows perfect alignment of face frame stiles and top and bottom rails. The handy inch scale lets you accurately set the stop..
- Adjustable width for different thick，For stock from 5/8" to a full 1” thick and more. The parallel arms open to accommodate stock up to 2.4” thick..
- High quality aluminum (drill guide) and die steel(bushing),high hardness and strength,good wear-resistant and durable to use,the drill bushings is in imperial (inch) sizes,1/4" 3/8" 5/16" ,not metric..
Spectre Performance - SPE-4480 Water Pump Pulley Shim Kit
- Use between the water pump flange and the pulley to space the pulley outwards for proper belt alignment.
- Kit includes 3-1/16 inch shims for thickness totals of 1/16 inch, 1/8 inch and 3/16 inch.
- Easy to install with no special tools or skills required.
Slotted Shim Assortment Kits - size b 3x3 assorted slotted shims
- Convenient assortment to carry to job site.
- Shims marked with thickness in decimal and metric.
- Slotted shim is the best way to solve alignment and leveling problems on motors pumps generators and.
Allstar ALL60200 Upper Control Arm Shim, (Pack of 10)
- Also available in . 125 thickness by ordering Allstar part 60201 (sold separately).
- Shims allow easy adjustment of caster/camber during front end alignment.
- Control arm shim is an upper type that is . 062 inch thick and designed for individual mounting.