Top Drawbar Extension Springs Reviews

Heavy Duty Replacement Extension Garage Door Spring Stretch Spring 2-Pack（160 lb)

• 160 POUND WEIGHT CAPACITY :spring for 90 pound garage door using extension spring system,use a scale to weigh the door if unsure of the weight of the door..
• RESURRET YOUR OLD GARAGEDOOR:these upgraded extension garage door springs are designed to replace these rusted,worn out,dangerous springs and refresh your old garage door..
• HEAVY DUTY:these springs are made of high quality heat treated spring steel,tested to be durable and long-lasting. Rated for 15,000 cycles (a cycle is 1 open and 1 close)..
• REPLACE BOTH SPRINGS:Having a mix of a new and an old spring on the same door can be very hard to balance and will keep your door from operating correctly.So we we only sell in pairs,you can also save money by buying a pair at a time..
• ANTI-RUST:high quality material with coat for corrosion resistance ,these springs are easy to clean and not tend to rust no matter indoor or outdoor..

Ideal Security Garage Door Springs with Safety Cables, for 175 lb to 185 lb Doors, Gold (Pack of 2)

• Garage Door Spring: These springs for garage doors use a continuous radius to form the hook to increase the strength of the spring and prolongs its longevity.
• Compatibility: Designed for standard 7-foot high garage doors, our extension spring provides additional lifting power for manual and electric garage doors.
• Durable Construction: Made to last for many years, this powder-coated garage door springs set is designed to be durable.
• This garage door spring set is tested to 15,000 cycles and rated for 12,000 cycles (a cycle is 1 open and 1 close).
• Garage Spring Set Includes: This garage door springs set includes 2 springs and 2 safety cables designed to reduce the risk of damage and injury in case the springs or fastenings break.
• Specifications: Each garage door extension spring is 25 inches long when relaxed and 67 inches long when fully stretched.
• They are color-coded for easy identification.
• This gold spring is compatible with doors weighing 175-185 lb.

Draw-Tite 36065 Trailer Hitch Drawbar Kit (Class II 1-1/4\) , Black

• "fits 1-1/4"" square receiver tube openings".
• drawbar measures 10 inches long with 5 inch rise.
• fits 1-1/4 inch square receiver tube opening and has 3/4 inch ball hole.
• high strength steel construction with a black powder coat finish, resistant to adverse weather conditions and corrosion, ensures they retain their attractive appearance for years to come.
• rated at 300 lbs. tongue weight (tw) and 3,500 lbs. gross trailer weight (gtw), always consult your vehicle's owner's manual for actual weight capacities.
• Drawbar measures 10 inches long with 5 inch rise.
• Fits 1-1/4 inch square receiver tube opening and has 3/4 inch ball hole.
• High strength steel construction with a black powder coat finish, resistant to adverse weather conditions and corrosion, ensures they retain their attractive appearance for years to come.
• Rated at 300 lbs. tongue weight (TW) and 3,500 lbs. gross trailer weight (GTW), always consult your vehicle's owner's manual for actual weight capacities.

NEIKO 00239A Flexible Extension-Bar Set, 1/4-Inch and 3/8-Inch Drives, Flexible Socket Extension Bars, 2-Piece Set

• FLEX BAR EXTENSION SET: The NEIKO flex extension bars, or socket extensions, quickly loosen and tighten nuts and bolts in hard-to-reach areas. These flexible extensions are great for automotive projects that need light torque applications..
• DURABLE SPRING SHAFTS: Each piece in this 2-piece extender set features a heavy-duty chrome vanadium anvil and an anvil receiver with a mirrored chrome finish for a professional look. The tightly coiled steel springs are protected with quality PVC sleeves..
• FLEXIBLE EXTENSION BARS: Both bars in this ratchet extension set maintain excellent rotational torque transfer from ratchet to socket, and the heavy-duty steel wound springs provide total flexibility up to 45°..
• LOCKING SOCKET EXTENSIONS: The spring-loaded ball-detent design lets you lock the sockets securely in place without them dropping while in use. The square-drive radius corners reduce tool and socket wear on this extension tool set..
• SIZES INCLUDED: This 2-piece set includes an 8-inch extension flex bar with a 3/8-inch drive and a 6-inch extension flex bar with a 1/4-inch drive. Add t....

ABN Compression & Extension Spring 200 pc Assortment Set, Heavy-Duty Steel Wire – Metal Tension Springs Replacement Kit

• EFFORTLESSLY FIX THE PROBLEM: The ABN Compression & Extension Spring 200 pc Assortment Set, Heavy-Duty Steel Wire – Metal Tension Springs Replacement Kit is a selection of 200 tension-giving spring devices in 20 different sizes and styles so you do not have to waste time and money searching at the hardware store for that one spring.
• This assortment includes a wide range of small compression and extension springs for workshops and home repairs.
• VARIOUS APPLICATIONS: Replace old, rusted, busted, or missing springs with these strong steel springs in any shop or household application.
• Fix a pull-down screen in your motorhome, repair your swinging camper door, gate latch, printer, or even use as a cage spring lock – the possibilities are endless.
• PERFECT TENSION: Constructed from #75 zinc-plated steel for rust resistance, maximum strength, and ultimate longevity.
• Spring coils are both durable and flexible for the right amount of tension.
• EASY STORAGE: Transparent 8.1” x 4.1” x 1.1” inch (20.6cm x 10.4cm x 2.8cm) clear plastic carrying tray for easy transportation, safe storage, and quick organization.
• Sizing chart included for simple identification.
• 20 SIZES: Compression springs – (10) 9/32” x 1/2.

Titan Attachments Tractor Drawbar Suitcase with Weight Brackets 2\ Receiver Cat 0 3-Pt

• ... ballast box. It can help keep your tractor from tipping over by protecting the integrity of your tractors front axle. This ballast box improves traction by balancing and shifting the weight from the machines weaker front end to its sturdier rear end so that it doesnt tip over..
• 2 INCH RECEIVER BUILT IN: The tractor drawbar features brackets for hanging suitcase weights as well as a 2" receiver hitch. Simple connect your trailer or other receiver attachment to the drawbar and transport it around your property. This allows you to load multiple tools at once instead of making multiple trips..
• MADE FROM STRONG STURDY STEEL: This attachment is constructed from heavyduty 11gauge steel. Its allsteel construction ensures its durability and longlasting nature. Additionally, it is powdercoated for extra protection from rust and corrosion keeping it looking and performing like new for years to come..
• DESIGNED TO FIT CATEGORY 0 TRACTORS: The drawbar is designed to connect to tractors with a category 0 3 point hitch system. The 5/8" lower lift pins and the 5/8" top link pin are included, so you are ready to use this drawbar counter weight immediately without any down time..
• DIMENSIONS: The overall width of the cat 0 drawbar is 22" from end of pin to end of pin and h....

AP Products 010-168 20\ Gas Spring

• PROFESSIONAL GRADE LOCKING GAS SPRINGS: Made from heavy duty steel, our gas springs feature controlled pushing, lifting, and adjusting with the ability to rigidly lock in both directions to ensure zero movement.
• HIGHLY SHOCK ABSORBANT: Our locking gas springs offer protection against vibration and light side forces with minimal friction for smooth movement and feature an integrated grease chamber.
• ULTRA STRONG STEEL CONSTRUCTION: Precision crafted from heavy duty steel, our premium grade locking springs feature powder coated cylinders and CeramPro treated piston rod surfaces and are resistant to corrosion.
• ENDLESS VARIATIONS AND APPLICATIONS: We offer a wide range of styles, and our gas springs are available with fast, normal, and slow extension speeds that are great for automotive and furniture use.
• THE BEST IN THE BUSINESS: With over 100 years of experience in production we have evolved into a worldwide premium supplier of gas springs, electric linear actuators, special pneumatics, hydraulic pumps and accessories, and dampers.

Performance Tool W5200 Tool, 200 Pc Springs

DURA-LIFT Heavy Duty Extension Garage Door Spring 2-Pack (180 lb.)

• 180 POUND WEIGHT CAPACITY - two replacement springs for a 180 pound garage door using a sectional garage door extension spring system.
• DOUBLE LOOPED ENDS FOR STRENGTH - two loops to connect pulley system extend the cycle life of the springs.
• SIMPLE INSTALLATION - install new or replace old, rusty springs quickly (professional installation recommended).
• CORROSION RESISTANT - powder coated steel coils to help slow rusting process over spring life.
• 1-YEAR WARRANTY - springs are warranted for 1 year from purchase date.

Bansbach Easylift B-Locking Gas Spring - Hydraulic Tools & Accessories, Part Number K0A3BK2-100-310-135N, Stroke 100mm, Force 135N (30lbs)

• PREMIUM GRADE GAS SPRINGS: Made from heavy duty materials, our gas springs are built to last and can be installed and stored in any position.
• SHOCK ABSORBENT: Our gas springs offer protection against vibration and light side forces with minimal friction for smooth movement.
• BUILT TO LAST: Our powder coated cylinders and CeramPro piston rods make our professional grade gas springs resistant to corrosion.
• ENDLESS VARIATIONS: We offer a wide range of styles, and our gas springs are available with fast, normal, and slow extension speeds.
• OVER 100 YEARS EXPERIENCE: We have become a worldwide supplier of gas springs, electric linear actuators, hydraulic pumps and accessories, and dampers.

Draw-Tite 36061 Trailer Hitch Drawbar Kit (Class II 1-1/4\) , Black

• Fits 1-1/4" square receiver tube openings.
• Drawbar measures 9-3/4 inches long with a 3-1/8 inch rise.
• Fits 1-1/4 inch square receiver tube opening and has 3/4 inch ball hole.
• High strength steel construction with a black powder coat finish, resistant to adverse weather conditions and corrosion, ensures they retain their attractive appearance for years to come.
• Rated at 300 lbs. tongue weight (TW) and 3,500 lbs. gross trailer weight (GTW), always consult your vehicle's owner's manual for actual weight capacities.

Draw-Tite 36063 Trailer Hitch Drawbar Kit (Class II 1-1/4\), Black

• Fits 1-1/4" square receiver tube openings.
• Drawbar measures 11-3/4 inches long with a 3-1/8 inch rise.
• Fits 1-1/4 inch square receiver tube opening and has 3/4 inch ball hole.
• High strength steel construction with a black powder coat finish, resistant to adverse weather conditions and corrosion, ensures they retain their attractive appearance for years to come.
• Rated at 300 lbs. tongue weight (TW) and 3,500 lbs. gross trailer weight (GTW), always consult your vehicle's owner's manual for actual weight capacities.

Titan Attachments Tractor Drawbar with Suitcase Weight Brackets Green 2 Receiver Cat 0

• STABILIZE YOUR TRACTOR: Protect your tractor, using this handy ballast box. It can help keep your tractor from tipping over by protecting the....
• 2 INCH RECEIVER BUILT IN: The tractor drawbar features brackets for hanging suitcase weights as well as a 2" receiver hitch. Simple connect your....
• MADE FROM STRONG STURDY STEEL: This attachment is constructed from heavyduty 11gauge steel. Its allsteel construction ensures its durability and....
• DESIGNED TO FIT CATEGORY 0 TRACTORS: The drawbar is designed to connect to tractors with a category 0 3 point hitch system. The 5/8" lower lift pins....
• DIMENSIONS: The overall width of the cat 0 drawbar is 22" from end of pin to end of pin and has an overall height of 16". The bottom support frame is....