Top Drain Plug Gasket Reviews

Kayak Drain Plug Kit Boat Scupper Plugs Thread Bung for Kayak Canoe Boat with Screws Hardware 2

  • 【High quality】: This drain plug is made of high-quality plastic, durable for long time use, rubber gasket on each plug protect hull from damage.
  • 【Outside diameter】：The Outside diameter of scupper plug is approx. 25mm / 1 inch.
  • 【Function】: Rubber gasket on each plug keep water away from infiltration and drain plugs is used to drain the water out of the inner hull of your....
  • 【Easy to install】: Simple drill holes and hard to mess up, easily install into your kayak, boat, and canoe.
  • 【Widely Application】: Scupper plugs suitable for kayak boat canoeing canoe ship drain plug.
Check Stock

(24Pcs) Oil Drain Plug Gaskets Replacement for Toyota Lexus Scion Crush Washer Seals Replaces# 9043012031 Aluminum

  • What can you get: you will receive 24 pieces oil drain plug washers in the package, regular replacement of the oil drain plug gasket can better protect your engine.
  • Wide application: this oil drain plug crush gasket washers is compatible with Toyota Prius Tundra Sienna Highlander Lexus Avalon Camry Corolla Tacoma 4Runner RAV4 Scion TC FJ Cruiser etc, fits for these brands' most part numbers.
  • Size details: the outside diameter of crush washer is 0.82 inch, inside diameter is 0.47 inch, thickness 0.07 inch, this oil drain plug gaskets washers is needed for every oil change, it helps to seal the drain plug and oil pan surfaces.
  • Warranty: For any reason, if you are not satisfied with your purchase, please contact us directly. We offer a 1-year warranty, 100% satisfaction guarantee.
Check Stock

WELWIK 2 Sets Cooler Drain Plug Replacement Triple Snap Drain Plug Cooler Plug Assembly for Coolers 1.1 Inches/ 2.8 cm Shaft Length, White

  • The cooler drain plug is equipped with a leak-proof gasket, which is tightly sealed to prevent leakage, and the cap is retained to help prevent the cap from being lost..
  • Cooler plug is made of high-quality plastic material, odorless.
  • resistant to dirt, can keep the drain hole of the cooler clean..
  • Drain cover total length 3.9 inches/10 cm, gasket diameter 0.8 inches/2 cm, nut length 1.3 inches/3.3 cm..
  • The cooler drain plug is equipped with a leak-proof gasket, which is tightly sealed to prevent leakage, and the cap is tied to help prevent the cap from being lost..
  • There are 2 drain caps, 2 nuts and 2 washers in the package. Please check whether this product is suitable for your cooler before buying..
Check Stock

2pcs Marine Replacement Nylon Drain Boat Plug & Gasket for Drain Plug

  • Boat Marine Replacement Nylon Drain Plug & Gasket For Drain Plug.
  • Plug to suit standard drain with Water tight seal Retaining legs UV Stabilized.
  • The red gasket provides a secure seal to prevent unwanted water from entering your boat.
  • Total length 54mm. Total width 24.5mm .thread width 19mm.Standard caliper measurement does not exclude the difference.
  • If you have any issues ，please feel free to contact us. 24-Hour Customer Supports..
Check Stock

Best Q M20 x 1.5MM Oil Drain Plug Thread Repair Kit Oil Pan Screws Rethread Tool

  • M20 x 1.5MM Oil Drain Plug Tap Thread Repair Kit Oil Pan Screws Rethread Tool.
  • Used to tap the damaged thread and slightly enlarge the diameter of oil drain hole, then fit a new drain plug and washer..
  • Ideal for repairing sump, gearbox and differential drain plug threads..
  • Suitable for 18mm engine oil screw after skidded and rethread by 20mm chaser then twist into 20mm screw + gasket..
  • Contents: Tap: M20*1.5 1pc, Screw: M20 6pc, Aluminum gasket: M20 6pc.
Check Stock

TENSPAL Kayak Drain Plug Kit Hull Coarse Thread Bung for Canoe Boat Set with Screws Replacement Hardware Accessories 2 PCs

  • ✔ 【PRACTICAL PRODUCT】- This Kayak Drain Plug Kit fits all kinds of canoeing, canoe, ship drain plug. Stops water infiltration and it is used to....
  • ✔【EASY TO USE】- Just install this kayak drain plug kit to the kayak boat, there are rubber gasket on each plug protect hull from damage..
  • ✔ 【PACKAGED】- This kayak drain plug kit packaging included 4 coarse thread kayak drain plug kit with 8 stainless steel screws..
  • ✔ 【SIZE FOR YOU】- Kayak drain plug kit press board size: Approx. 2.2*1.2 inches (5.6*3.1cm) , Outside diameter of scupper plug: Approx. 1 inch....
  • ✔【100% SATISFACTION GUARANTEE】- We promise 100% satisfaction guarantee and 60 days Money Back Services. Tips: Please confirm the size is....
Check Stock

Honoson 3 Sets Cooler Drain Plug Cooler Plug Replacement Triple Snap Drain Plug Cooler Plug Assembly for Coolers 1.1 Inches/ 2.9 cm Shaft Length, White

  • Cooler size: the drain cap is 3.9 inches/ 10 cm in total length, and the gasket is 0.8 inch/ 2 cm in diameter and 1.1 inch/ 2.9 cm shaft length, and the nut is 1.3 inches/ 3.2 cm in total length.
  • Please check whether this product is suitable for your cooler before purchasing.
  • Note: please confirm whether the shaft length is suitable before purchasing.
  • Quality material: the cooler plug is made of quality plastic material, which is odorless, safe and reliable.
  • It is dirt resistant and can keep the drain hole of your cooler clean.
  • Leak-proof design: the cooler drain plug is equipped with a leak-proof gasket, which seals tight to prevent leakage and the tethered cap helps to avoid cap loss.
  • Easy to install: the replacement triple snap drain plug is simple to use, with no other tools required.
  • You just need to pass the plug through the cooler and tighten it with a nut and a washer.
  • You will get: there are 3 pieces of drain caps, 3 pieces of nuts and 3 pieces of gaskets in the package.
  • The size is proper and the quantity is enough for you and your family to use.
Check Stock

Cooler Drain Plug Replacement Kit, 1.5 " Shaft Length, for 50 58 & 82 Qt Xtreme Coolers, Cooler Parts, Replacement Quality Durable Standard Drain Plug Assembly. Drain Plug Compatible with Most Cooler.

  • QUALITY RAW MATERIALS - Cooler Drain Plug Replacement Kit Made of Quality ABS Plastic, Strong and Durable, Not Easy to Corrode..
  • COMPATIBLE MODELS - Cooler drain plug Compatible with Coleman 50 58 and 82 Quart Xtreme Coolers. You Need to Double Check the Cooler Drain Plug Hole Size and Cooler Wall Thickness As This is Not a Generic Cooler Drain Plug..
  • PACKAGE INCLUDES - 1.5 " Shaft Length Drain Spout x1, Drain Cap, x1, Gasket x1, Reusable Packaging x1..
  • EASY AND FAST INSTALLATION - You Can Easily Replace the Damaged Cooler Drain Plug. the Cooler Drain Plug Replacement Kit Contains the Parts You Need to Replace, Which Are Convenient and Quick and Can Also Be Stored As a Spare..
  • QUALITY AFTERSALES - With Fast Response and Quality Customer Service, We Are Committed to Providing Each Customer with a Practical Cooler Drain Plug Replacement Kit. if You Have Any Questions, Please Feel Free to Contact Us..
Check Stock

Ozark Trail and Cooler Drain Plug Assembly

  • Includes: Drain Plug, Drain Plug Gasket, Drain Cap, & Tether.
  • Only Fits: Ozark Trail 52QT and 73QT Coolers..
  • Does Not Fit Ozark Trail 35QT or 45QT Wheeled Coolers.
  • Does Not Fit New Style Ozark Trail Coolers - See Pictures.
  • Outside Thread Diameter 2.25", Overall Diameter 2.75".
Check Stock

Dorman 090-038CD Oil Drain Plug Standard M12-1.25, Head Size 14Mm Compatible with Select Models

  • Important function: The important function of the magnetic drain plug is to attract and help remove the fine metal particles in the crankcase oil, allowing the oil to flow through the engine more easily. High-performance racing cars and street engines rely on these as additional safeguards..
  • Strong protection: The high-strength magnet of the drain valve plug prevents harmful metal scraps from entering the engine. These plugs have a very powerful magnet that can help collect these debris directly from the oil during operation..
  • Engine and oil pan protection: The sealing and anti-vibration mechanism of the engine drain plug can reduce the risk of engine damage due to catastrophic oil loss due to the loss of the drain plug..
  • Easy to install: Our oil drain plug requires no installation tools and can be installed in a few seconds. Before installation, please put the gasket in the groove to prevent the drain pipe from loosening..
  • Applicable models: The replacement of the oil drain plug is perfectly suitable for Ford F150 Raptor, and for Ford Mustang 2015-2019, 14*1.5 models..
Check Stock

50 Pieces Aluminum Engine Oil Crush Washers Drain Plug Gaskets Compatible with Part 94109-14000 Fits Civic Accord CR-V/CRV and More

  • Package contents: includes 50 pieces good quality aluminum oil drain plug washers.
  • Apply to: this oil crush washer, drain plug gasket is a compatible replacement for your Honda OEM washer or gasket.
  • Quality materials: our washers are made of good quality materials, and constructed to strict quality standards, ensuring proper fit with the drain....
  • Size: outside diameter: 22 mm/ 0.86 inch, inner diameter: 14 mm/ 0.55 inch, thickness: 2 mm/ 0.08 inch.
  • Note: guaranteed properly fit, please refer to product details and description for vehicle fitment information.
Check Stock

Igloo Cooler Replacement Standard Triple Snap Drain Plug (2pk)

  • Approx 13/16" in diameter at the threaded portion.
  • Triple snap (push-to-close) tethered cap. Includes: 2 drain plugs with push-to-close cap and nut with gasket & washer..
  • Easy installation: Place plug through cooler, screw down gasketed nut.
  • Triple-snap cap seals tight to prevent leaks, tethered cap helps prevent cap loss.
  • DOUBLE CHECK your cooler's drain plug hole size and cooler wall thickness. This is NOT a universal drain plug for Igloo coolers, as there are other sizes available..
Check Stock

X AUTOHAUX 10pcs M11 Black Oil Drain Plug Gaskets Replacement for GM 12616850 3536966

  • [Specification] This is for you to replace your worn out or broken oil drain plug gasket. Direct replacement gaskets. Proper fit with the drain plug ensures a tight seal..
  • [Fitment]Replace part number: 323513 5066453 F5TZ6734BA..
  • [Widely Applications] Durable during use. Constructed from material. Fine workmanship..
  • [Feature] Easy installation. Direct replacement to better match your car..
  • [Package Include] 10 x Oil Drain Plug Gaskets.
Check Stock