Top Double acting Cylinder Reviews

Simlug Mini Air Pneumatic Cylinder, Cdj2B10-30B 10Mm Diameter 30Mm Stroke DoubleActing Stainless Steel Pneumatic Air Cylinder

  • The pneumatic actuator, The pneumatic cylinder is a mechanical devices which use the power of compressed gas to produce a force in a reciprocating linear motion..
  • The pneumatic air cylinder, Made of high quality stainless steel, the pneumatic cylinder has long service life..
  • This is a double-acting cylinder which uses the force of air to move in both extend and retract strokes..
  • It has 10mm cylinder diameter and 30mm stroke, the pressure is 0.15Mpa~1Mpa..
  • Pneumatic cylinder is quieter, cleaner, and do not require large amounts of space for fluid storage..
Check Stock

8 Quart DC 12V Hydraulic Pump Power Supply Unit Pack Double Acting Dump Trailer Fit for Lift Unloading

  • Displacement of Hydraulic Pump: 0.825 GPM .Relief Valve Pressure: 22 MPA ( 3200 PSI Max. Relief Setting For Increased Lifting Power on A port ).
  • Double Acting Power-Up/Power-Down. Hand Held Pendant With About 15 Foot ( 4.5m) Removal Cord And Start Solenoid.
  • Application: This Hydraulic Power Unit Is Suitable For Control Of A Set Of Double-Acting Cylinder. Widely Used In Small Dump Truck, Hydraulic Winch, Etc..
  • Notice: A New Electronic Instruction Will Send To You Through Your E-mail Coming With The Order. Pls Feel Free To Contact Us When You Have Problems On Installation About That..
Check Stock

VEVOR Double Acting Hydraulic Cylinder 2'' Bore, Top Link Hydraulic Cylinder 10'' Stroke, Retracted 18\ Extended 26 Hydraulic Side Link Swivel Eye Bearing w/Check Valve for Tractors, Category 1, 2

  • High Tensile Steel Structure: This hydraulic lifting cylinder is a welded double acting cylinder. It has a high tensile honed cold drawn hydraulic tube, a polished piston rod, and sturdy threaded glands. With bearing design on base ends. Carbon steel construction ensures its longevity and features a max 6700 lbs pushing force and 4500 lbs pulling force..
  • 2"-2.5" Bore 10" Stroke Top Link: The top link cylinder is built under specific dimensions. Bore: 2"-2.5". Stroke Length: 10". Rod Size: 1". Pin Size: 0.8". With retracted min length 20" and extended max length 28". Double Pilot Check Valve Port Size: G3/8. Max Pressure: 5076PSI. Max Flow Rate: 20 L/ min. Opening Pressure: 50.76 PSI..
  • Swivel Eye Bearing Design: There is a spherical swivel eye bearing design on both ends. Due to the sturdy and flexible bearings, you can quickly fix and install the cylinder on your tractors or min excavators. Joint Bearing Width: 2". Thickness 0.8". Durable enough to hold a lot of force..
  • With Check Valve & Fully Tested: The well-assembled and thoroughly tested tractor top link hydraulic cylinders also come with a double pilot operated check valve to help hold the cylinder and prevent drift. The assembled inside sealing rings guard the high performance of sealing, accessi....
Check Stock

Enerpac ZU4408PB Universal Electric Pump with VM43M Jog Valve Basic 115V and 8 L Usable Oil Capacity

  • Electric hydraulic pump with 115V motor for powering a double-acting hydraulic cylinder or tool.
  • Four-way, three-position valve to control direction of hydraulic fluid in double-acting system.
  • Flow rate of 60 cu. in. per minute at maximum operating pressure of 10,000 psi.
Check Stock

1\ Bore X 24\ Stroke Double Acting Pneumatic Cylinder (Roughly 1\ Bore 20MM)

  • These pneumatic cylinders are what everyone uses to make Halloween Props. They are extremely versatile, and have tons of mounting options that will allow you to set up your prop in may different ways.
  • You can also use these with a 2-way or 3-way solenoid if you are using gravity/weight to push the cylinder back down. When the solenoid is triggered, air is applied through the bottom hole - forcing rod up very quickly..
  • Examples: Lid Opener Pop-up props Moving Skeletons or Zombies Door Banger Coffin Lid Banger Barrel Lid Banger Monster in a Box Trash Can Trauma Bore.
  • These double-acting cylinders extend quickly when air is applied, and snap closed quickly when Solenoid is triggered (when used with a 4-way solenoid)..
  • This is the measure of the diameter of the cylinder. Bigger bore size = more air required to open cylinder = more torque (power) to move things. With this roughly 1" BORE, you will get about 100 lbs. of force at 100 PSI of air pressure. Stroke: This is the measure of how far out the shaft of the cylinder will extend when fully extended. Air Holes: Cylinder comes with two push-in fittings that accept 1/4" airline..
Check Stock

The ROP Shop | Hydraulic Cylinder 4x24 Bore x Stroke for Dirty Hand Tools 22 Ton 100171, 100950

  • The ROP Shop replacement Hydraulic Cylinder 4x24 Bore x Stroke for Dirty Hand Tools 22 Ton 100171, 100950.
  • Specs - Bore: 4". Stroke: 24". Clevis Mounting Holes Diameter: 1 1/8". Chrome Rod Diameter: 1 3/4" with 9/16" Mounting Hole. Maximum Operating Pressure: 3500 PSI. Welded Design. Double Acting. Rebuildable. Refer to images 2 & 3 for more information.
  • for/fits many of the following brands of log splitters: Tractor Supply Co (TSC), CountyLine, Huskee, MTD, Oregon, SpeeCo & SplitMaster.
  • Please be sure to verify your specs and/or part/model number to ensure correct fitment. Note: this is a new hydraulic cylinder, but may have some spots where paint is chipped off.
Check Stock

Baomain Pneumatic Air Cylinder SC 100 x 75 PT 1/2; Bore: 4\

  • Package Content: Cylinder + 4 PCS Fittings.
Check Stock

Baomain Pneumatic Air Cylinder SC 32-200 32mm Bore 200mm Stroke Screwed Piston Rod Dual Action

  • Size : 45 x 45 x 344mm / 1.8" x 1.8" x 13.5" (L*W*H).
  • Package Includes: 1 x Air Cylinder, 2 x Fittings.
Check Stock

WEN WT4030 Cross Tube Hydraulic Cylinder with 4 Bore and 30-inch Stroke, Black

  • Double-acting steel-welded design creates pressure up to 3000 PSI.
  • Features a 4-inch bore, a 30-inch stroke, and a 2-inch rod diameter.
  • SAE-8 port (3/4 inch-16UNF) connects easily to your hydraulic hose.
  • Retracted 40-inch cylinder extends out to 70 inches in length.
  • Includes a polished chrome-plated rod, and a two-year warranty.
Check Stock

WEN WT4008 Cross Tube Hydraulic Cylinder with 4 Bore and 8-inch Stroke, Black

  • Double-acting steel-welded design creates pressure up to 3000 PSI.
  • Features a 4-inch bore, a 8-inch stroke, and a 2-inch rod diameter.
  • SAE-8 port (3/4 inch-16UNF) connects easily to your hydraulic hose.
  • Retracted 18-inch cylinder extends out to 26 inches in length.
  • Includes a polished chrome-plated rod, and a two-year warranty.
Check Stock

WEN WT3508 Cross Tube Hydraulic Cylinder with 3.5 Bore and 8-inch Stroke, Black

  • Double-acting steel-welded design creates pressure up to 3000 PSI.
  • Features a 3.5-inch bore, a 8-inch stroke, and a 1.75-inch rod diameter.
  • SAE-8 port (3/4 inch-16UNF) connects easily to your hydraulic hose.
  • Retracted 18-inch cylinder extends out to 26 inches in length.
  • Includes a polished chrome-plated rod, and a two-year warranty.
Check Stock

WEN CC2512 Clevis Hydraulic Cylinder with 2.5 Bore and 12-inch Stroke, Black

  • Double-acting steel-welded design handles pressure up to 3000 psi.
  • Features a 2. 5-inch bore, a 12-inch stroke, and a 1. 5-inch rod diameter.
  • SAE-8 port (3/4 inch-16UNF) connects easily to your hydraulic hose.
  • Retracted 22. 25-inch cylinder extends out to 34. 25 inches in length.
  • Includes a 1-inch zinc-plated steel pin, a polished chrome-plated rod, and a two-year.
Check Stock

AC 250V 60uF 50/60HZ Cylinder Shaped Run Round Capacitor CBB60 for Motor Cool Heat Pump Washing Machine

  • STURDY & DURABLE -- High quality material and cylinder shape improves performance of the product and makes it durable, A capacitor is an electric component that temporarily stores an electrical charge..
  • RELIABLE ELETRICAL -- Reliable insulation performance, excellent electrical properties and safe explosion-proof devices, Round capacitor can be used to substitute oval shape one with the same MFD AND Volt specs..
  • SUPER PERFORMANCE -- Heat resisting, low leakage, low loss and low impedance, Round cylinder-shaped dual run capacitors are commonly used for air conditioning, to help in the starting of the compressor and the condenser fan motor..
  • STRONG OVERLOAD -- Current with good impact resistance, strong overload ability, A motor acts like a transformer with the run winding acting as the primary and the start winding acting as the secondary..
  • WIDE APPLICATION -- Suitable for the start-up of motors with frequency of 50Hz and 60Hz, such as washer, pump and motors, Built to the toughest standards for AC motor run capacitors..
Check Stock