Top Double Rod Cylinder Reviews

Sydien 20mm Bore 250mm Stroke Pneumatic Air Cylinder Single Rod Double Action with Y Connector and 4Pcs Pneumatic Quick Fitting

  • Package Content: 1 Pcs x Mini Pneumatic Cylinder with 1 Pcs x Y Connector & 4 Pcs x Pneumatic Quick Fitting..
  • Made of aluminum alloy and metal, thickened cylinder body, high quality sealing rod, imported grease..
  • Two screw hole connections to get the air in and out, and a rod connected to the plunger that goes in and out..
  • Cylinder is a mechanical devices which utilize the power of compressed gas to produce a force in a reciprocating linear motion..
Check Stock

VEVOR Double Acting Hydraulic Cylinder 2'' Bore, Top Link Hydraulic Cylinder 10'' Stroke, Retracted 18\ Extended 26 Hydraulic Side Link Swivel Eye Bearing w/Check Valve for Tractors, Category 1, 2

  • High Tensile Steel Structure: This hydraulic lifting cylinder is a welded double acting cylinder. It has a high tensile honed cold drawn hydraulic tube, a polished piston rod, and sturdy threaded glands. With bearing design on base ends. Carbon steel construction ensures its longevity and features a max 6700 lbs pushing force and 4500 lbs pulling force..
  • 2"-2.5" Bore 10" Stroke Top Link: The top link cylinder is built under specific dimensions. Bore: 2"-2.5". Stroke Length: 10". Rod Size: 1". Pin Size: 0.8". With retracted min length 20" and extended max length 28". Double Pilot Check Valve Port Size: G3/8. Max Pressure: 5076PSI. Max Flow Rate: 20 L/ min. Opening Pressure: 50.76 PSI..
  • Swivel Eye Bearing Design: There is a spherical swivel eye bearing design on both ends. Due to the sturdy and flexible bearings, you can quickly fix and install the cylinder on your tractors or min excavators. Joint Bearing Width: 2". Thickness 0.8". Durable enough to hold a lot of force..
  • With Check Valve & Fully Tested: The well-assembled and thoroughly tested tractor top link hydraulic cylinders also come with a double pilot operated check valve to help hold the cylinder and prevent drift. The assembled inside sealing rings guard the high performance of sealing, accessi....
Check Stock

Kit King - Case 128728A1 Aftermarket Hydraulic Cylinder Seal Kit

  • Case equipment types: backhoe loaders, landscapers, loaders, skid steer, unimog, uni loaders & more.
  • CASE Equip. Models: 1830, 1835, 1835B, 1835C, 1838, 1840, 1845, 1845B, 1845C, 1845S, 480, 480B, 480C, 480D, 480E, 580, 580B, 580C, 580D, 580 Super D, 580 Super E, 480E LL, 480LL, MB4/94 & More.
  • Typical hydraulic applications: bucket, tilt.
  • Cylinders: 118110A1, G103407, G33128, G34926 & More - Double Check Rod Size and Cylinder Numbers. Two Cylinder Sizes May Exist On Your Equipment Model.
Check Stock

A-Team Performance - GM Universal Manual Master Cylinder Rod Kit

  • GM Universal Manual Master Cylinder Rod Kit.
  • 1950-1970 GM Universal Manual Master Cylinder Rod Kit.
  • Works with power and non-power applications Includes adapters for 10 most common combinations.
  • Accommodates eyelet, clevis & bell crank configurations Universal Adjustable Push Rod.
Check Stock

Best Home Fashion 1 Inch Diameter Double Metal Decorative Window Curtain Rod with Circle Ring Finial - Capped Acrylic Cylinder Finial Double Metal Curtain Rod - 120 Gold

  • Double Metal Rod - 1” front rod diameter, ¼” back rod diameter.
  • Capped Acrylic Cylinder finials included.
  • 48” – 84” rod length, 66” – 120” rod length.
Check Stock

Baomain Pneumatic Air Cylinder SC 100 x 75 PT 1/2; Bore: 4\

  • Package Content: Cylinder + 4 PCS Fittings.
Check Stock

Maxim WSB Swivel Ball Welded Cylinder - Double Acting Hydraulic Cylinder 1.5” Bore x 12” Stroke, 0.75” Pin & 1” Rod Diameter, 19.25” Retracted, 3000 PSI, 5300 lb Column Load, SAE 6 Port Size, 10 lb

  • SPECIFICATIONS: This universal hydraulic cylinder is double-acting with a 1.5” bore, 12” stroke length, 0.75” pin and 1” rod diameter. 19.25” Retracted, 31.25” Extended. It offers a maximum working pressure of 3000 PSI, has 5300 lb column load capacity, and SAE 6 port size..
  • PRECISE PERFORMANCE: Our hydraulic cylinder delivers error-free performance in compact and mobile equipment. The heavy-duty piston seals rule out leaks for consistent performance in heavy load applications..
  • HIGHLY RELIABLE: This heavy-duty double-acting hydraulic cylinder with swivel ball mounts is superior in design compared to other hydraulic cylinders. It provides reliable performance in complex applications requiring up to 3000 PSI..
  • BUILT TO LAST: Our welded cylinder withstands high-temperature differences and is corrosion resistant. It has a compact and lightweight design and its welded barrels provide strength and stability to its form and functioning..
  • CUSTOMIZABLE: Our swivel ball hydraulic cylinder can be customized per OEM requirements. It offers 1-inch to 3 inches bore sizes and stroke lengths that can go up from 4 inches to 36 inches for greater convenience and faster action..
Check Stock

1\ Bore X 24\ Stroke Double Acting Pneumatic Cylinder (Roughly 1\ Bore 20MM)

  • These pneumatic cylinders are what everyone uses to make Halloween Props. They are extremely versatile, and have tons of mounting options that will allow you to set up your prop in may different ways.
  • You can also use these with a 2-way or 3-way solenoid if you are using gravity/weight to push the cylinder back down. When the solenoid is triggered, air is applied through the bottom hole - forcing rod up very quickly..
  • Examples: Lid Opener Pop-up props Moving Skeletons or Zombies Door Banger Coffin Lid Banger Barrel Lid Banger Monster in a Box Trash Can Trauma Bore.
  • These double-acting cylinders extend quickly when air is applied, and snap closed quickly when Solenoid is triggered (when used with a 4-way solenoid)..
  • This is the measure of the diameter of the cylinder. Bigger bore size = more air required to open cylinder = more torque (power) to move things. With this roughly 1" BORE, you will get about 100 lbs. of force at 100 PSI of air pressure. Stroke: This is the measure of how far out the shaft of the cylinder will extend when fully extended. Air Holes: Cylinder comes with two push-in fittings that accept 1/4" airline..
Check Stock

Brake Adjustment Tool, Brake Booster Adjustment Tool, Brake Booster Push Rod Adjustment Tool for Adjustable Braking Distance of Brake Pedal, Suit for Most Brake Boosters with Adjustable Pins

  • ...designed a brake booster adjustment tool that works for everyone, even if you don't have the expertise also can use power brake booster pushrod pin adjustment tool quickly and easily. The brake adjustment tool's designed with a magnetic inner core, which can be firmly adsorbed on the surface of the master cylinder and booster during use. Our brake adjustment tool can improve work efficiency and saves time.
  • Brake Adjustment Tool Rejects All Safety Hazards - We designed a new master cylinder push rod length gauge is measure the depth of the master cylinder piston bore in order to adjust the length of the booster push rod pin. And two ends of the booster push rod pin adjustment tool are designed with a magnetic inner core, which can be firmly adsorbed on the surface of the master cylinder and booster during use which making your measurement and maintenance process easier.
  • High Quality That Puts Everyone's Mind at Ease - Get master cylinder push rod length gauge that no more worries about quality. Our brake booster adjustment tool kit is made of high-quality aluminum alloys, and the middle push rod is made of 304 stainless steel, and sliver phosphate coat....
Check Stock

Baomain Pneumatic Air Cylinder SC 32-200 32mm Bore 200mm Stroke Screwed Piston Rod Dual Action

  • Size : 45 x 45 x 344mm / 1.8" x 1.8" x 13.5" (L*W*H).
  • Package Includes: 1 x Air Cylinder, 2 x Fittings.
Check Stock

WEN WT4030 Cross Tube Hydraulic Cylinder with 4 Bore and 30-inch Stroke, Black

  • Double-acting steel-welded design creates pressure up to 3000 PSI.
  • Features a 4-inch bore, a 30-inch stroke, and a 2-inch rod diameter.
  • SAE-8 port (3/4 inch-16UNF) connects easily to your hydraulic hose.
  • Retracted 40-inch cylinder extends out to 70 inches in length.
  • Includes a polished chrome-plated rod, and a two-year warranty.
Check Stock

WEN WT4008 Cross Tube Hydraulic Cylinder with 4 Bore and 8-inch Stroke, Black

  • Double-acting steel-welded design creates pressure up to 3000 PSI.
  • Features a 4-inch bore, a 8-inch stroke, and a 2-inch rod diameter.
  • SAE-8 port (3/4 inch-16UNF) connects easily to your hydraulic hose.
  • Retracted 18-inch cylinder extends out to 26 inches in length.
  • Includes a polished chrome-plated rod, and a two-year warranty.
Check Stock

The ROP Shop | Hydraulic Cylinder 4x24 Bore x Stroke for Dirty Hand Tools 22 Ton 100171, 100950

  • The ROP Shop replacement Hydraulic Cylinder 4x24 Bore x Stroke for Dirty Hand Tools 22 Ton 100171, 100950.
  • Specs - Bore: 4". Stroke: 24". Clevis Mounting Holes Diameter: 1 1/8". Chrome Rod Diameter: 1 3/4" with 9/16" Mounting Hole. Maximum Operating Pressure: 3500 PSI. Welded Design. Double Acting. Rebuildable. Refer to images 2 & 3 for more information.
  • for/fits many of the following brands of log splitters: Tractor Supply Co (TSC), CountyLine, Huskee, MTD, Oregon, SpeeCo & SplitMaster.
  • Please be sure to verify your specs and/or part/model number to ensure correct fitment. Note: this is a new hydraulic cylinder, but may have some spots where paint is chipped off.
Check Stock