Top Double Orifice Air Valve Reviews

Ellbest 1/2" Electric Solenoid Valve 2W-160-15 AC110V Brass Valve NC Normally Closed Valve for Water, Air, Gas

  • High quality electric solenoid valve, for water, air or oil.
  • Durable brass construction and a high quality copper solenoid are made to last..
  • This valve is N/C (normally closed), meaning it is closed when power isn't supplied..
  • It's applicable in many fields: Irrigation controls (garden, farm,etc.), liquid controls ( pipeline, artificial river etc. and air controls ( lab, factory, etc.).
Check Stock

OBPFY OBPSFY Car Air Conditioning Orifice Tube Removal Tool，A/C Orifice Tube Remover/installerr

  • ?Orifice Tube Remover? x Car air conditioning orifice tube removal tool,for remove and install orifice tubes,auger for removing broken Orifice tubes,simply turn into Orifice tube for grip, Use the nut to apply even and steady pressure so you don’t damage the small plastic ears on the orifice tube,then remove Orifice tube.Professional tools will make replacement and maintenance easier.Fits many GM..
  • ?Material? x Orifice Tube Removal Tool is made of high quality metal,sturdy and durable, can be used for a long time..
  • ?Easy to use? x This tools slides in and locks on to tabs on the orifice with a slight twist,then able to pull / rotate the old orifice until it could get out.It saves time trying to weasel a pair of needle nose pliers into a small area to pull out the old orifice tube.No worries about snapping off the end with pliers..
  • ?Tip? x Sometimes you have to add a little bit of heat on the pipe to make the other fees to loosen up a little bit because otherwise sometimes for the brakes and it's going to be more hot to take it out so it's better to apply some heat the heat down and then start pulling..
  • ?Package? x 1 X Car Air Conditioning Orifice Tube Removal Tool.
Check Stock

Compatible/Replacement Part for a Ford - 302-071 - Chrome Steel Valve Cover Set w/Compatible/Replacement Part for a Ford Racing Logo

  • This is an Officially Licensed Ford Product.
  • TPMS Compliant, including inner "O" ring seal ensuring a clean valve orifice to maintain consistent tire pressure.
Check Stock

munirater 150DB Train Air Horn Kit, 4 Trumpet Loud Train Horns Kit with 120 PSI 12V Air Compressor Air Horn Compressor Tank for Trucks, Cars, Van Boats, Most 12V Vehicles

  • This product requires an Onboard Air System (Tank and Compressor).
  • Dual Trumpet (In-line) Stainless Steel Train Air Horn.
  • 12V Heavy Duty Electric Air Valve (Solenoid) with Larger Air Orifice.
Check Stock

mistcooling 250 PSI Misting Pump

  • 250 psi pump quiet operation 35Db solenoid valve – Controls flow of water in the pump in built filter – helps protect your misting nozzles built in water by pass self-priming.
  • Nickel-plated brass button series With stainless-steel Orifice Standard 10/24-inch thread 0. 012-inch Orifice Rust-resistant fixed impeller pin 0. 014 GPM Flow per Nozzle.
  • Maximum inlet pressure: 100 psi Minimum inlet pressure: self- priming. Maximum outlet pressure: 250 psi (depends on line length and numbers of nozzles) maximum flow: 0. 9 GPM full load Amps. 110V AC: 0. 7 amps 12V DC: 4. 0 amps Voltage: 110V-220V AC/ 12V DC (refer manufacturing label on the pump) noise level: 40 dB. Maximum fluid temperature: for room temperature/ cold water applications only.
  • Max pressure 250 psi Available in 110 V, 220 V & 12 VDC Durable Rust Proof Enclosure Thermal Safety Switch Oil-less Pumps may generate heat, motor manufacturer have installed built-in thermal safety switch to improve the longevity of pumps Standard pump inlet: 3/8-inch push lock Fitting. Standard Pump outlet: ¼ inch Push-lock fitting. Max pressure 250 psi 110 V AC.
  • 1. Solenoid Valve Solenoid valve controls the flow of the water in to the pump. You may leave the inlet water source on at all the time. Water will enter th....
Check Stock

GasOne Head Banjo High Pressure Propane Burner 10 in Heavy Duty

  • Includes - Burner Head, Orifice, Air Controller & 0-20 PSI adjustable High Pressure Regulator and Hose.
  • BRASS FITTING ORIFICE BLOCK - Includes Brass Fitting Orifice block & Air shutter and Spring.
  • HEAT RESISTANT - Cast Iron will not melt easily compared to aluminum construction, Has high heat tolerance.
  • HIGH HEAT OUTPUT - With 0-20 PSI Regulator it produces up to 200, 000 BTU.
Check Stock

American Standard SELECTRONIC 6065121.002 Chrome

  • BEST-IN-CLASS: The Selectronic toilet flush valve by American Standard has a self-cleaning piston design that eliminates routine maintenance and....
  • FEATURES: Toilet flush valve has an integral wiper spring cleans the refill orifice with every flush.
  • American Standard toilet parts deliver reliable....
  • FLAWLESS DESIGN: This toilet flush valve has state-of-the-art electronics that prevent ghost flushing and a fully mechanical manual override button....
  • SIZE: The American Standard Exposed Selectronic toilet flush valve is capable of meeting ADA requirements when installed under a grab-bar that is....
  • INCLUDES: American Standard toilet flush valve also includes a 8-year CR-P2 lithium battery installed.
  • has no diaphragms requiring replacement or....
Check Stock

Keenso Boat Air Valve, Durable Marine Air Valve Boat Lightweight Gas Valve Replacement for Inflatable Dinghy Kayaking Rubber Boats

  • ⛵【High Compatibility】-- This boat air valve adapter has high compatibility. Fits most paddleboards, canoes, rubber boats, assault boats, flushing pools, floating rows, inflatable beds, dinghy, kayak, etc.
  • ⛵【Easy to Operate】-- The boat air valve brings you more convenience to air inflation, simple and effective, saving time and effort.
  • ⛵【Specifications】-- Condition: 100% brand new, Item type: Safety Valves, Material: plastic, Diameter: Approx. 5.5cm/2.2in, Height: Approx. 4.2cm/1.7in, Inner diameter: Approx. 3.4cm/1.3in, Weight: Approx. 66g.
  • ⛵【Double Protection】-- Adopting double sealing protection design, this boat gas valve replacement provides excellent air leakage performance, necessary accessories for kayak enthusiast.
  • ⛵【Durable & Sturdy】-- Made of premium plastic material, our marine air valve is sturdy with high durability, wear-resistant with long service life, will be great replacement for your boat gas valve.
Check Stock

Pargro Quick Drain Blocks, 4\ x 4\

  • Valve Open Cycle: 0.5 to 10 Seconds, Valve Close Cycle: 0.5 to 45 Minutes.
Check Stock

Ashford Traveller Spinning Wheel Double Drive/Unfinished

  • Double drive model. Can be used in single drive (scotch tension) mode. Double treadle with polyurethane hinges for effortless treadling. Compact castle design. Portable and easy to move. Ball bearing drive wheel axle..
  • Easily adapt the wheel to your specific spinning needs with add-on kits..
  • Includes: 4 standard double drive bobbins, threading hook, learn to spin booklet, and built-in Lazy Kate..
  • Double drive ratios 6, 8, 10.5:1 (13:1 bobbin lead) . Orifice: 3/8 inch (1 cm). Orifice Height: 31 3/4 inches (80.5cm). Wheel diameter 18 inches (16cm). Weight: 15 lb (7kg)..
  • Made from solid New Zealand Silver Beech. Unfinished natural wood. Assemble required..
Check Stock

Boxing Speed Bag Latex Heavy-Duty Replacement Glue in Bladder for Boxing Double End Speed Bags of XS

  • HI QUALITY BLADDER - Extra-durable heavy-duty latex replacement bladder for your Double End Bag..
  • EASY TO REPLACE - Two ways to do this. Unlace your double end bag or double double end bag, peel the older bladder out. Option 1: Insert the new bladder valve stem thru the hole. Lace up your double end bag and fill with air. Option 2: We prefer this option, put glue on the lip, push the valve stem thru and hold it tight so the glue sticks to the bag, hold tight for a few minutes. Lace up your double end bag and fill with air..
  • Gluing will reduce any chance of the valve pushing back into the bag when the bag is low on air. DURABLE – Very durable. When filled optimally the bladder will conform to the shape of your bag and offer the quick rebounds when striking. This latex heavy duty bladder is constructed to prevent air loss..
  • SUPER LIGHTWEIGHT: This bladder is super lightweight and will not add to the drag on the double end bag like the plastic ones do..
  • MULTIPLE SIZES. We have sizes for all double end bags. We have bladders for 5” balls, 6” balls, 7” balls and 9” balls. NOTE: Do not over inflate..
Check Stock

KidsPark Snow Tube 47 Inch Double-Layer Thickened Snow Tubes for Sledding Heavy Duty, Super Large Inflatable Tube Sled for Boys Girls with Rope

  • ❄3 In 1 Inflatable Valve：With the 3 in 1 inflatable valve, just use an air pump to inflate and it will be ready to use.For giant inflatable you can inflate the snow tube by air pump with first layer valve fully opened and middle black valve closed. When the sledding tube is full of 80%, close the middle black valve and use the small valve to make it full..
  • ❄With Towable Rope：Our inflatable sled not only has a reinforced safety handle, but also adds ropes to make it easy to move. It is the best outdoor winter skiing toy for children and adults, perfect Christmas and birthday gift..
  • ❄Double Layer Thickening Design：Adopted a double-layer thick bottom design, which is more durable than most snow tube. There is a hole at the bottom, you don’t need to worry. This is specifically designed to discharge the air between inflation and deflation, making it more durable and not affecting the use..
  • ❄High Quality Material：Made of double-layer thickened and cold resistant PVC material, with double impermeable function. 47 inch super size design can accommodate 2-3 people..
  • ❄Easy to Carry：After deflation, it can be folded. Easy to carry and store. The package also includes a patch pack that can be quickly fixed..
Check Stock

New & Improved 2023 Sunlite Sports River Raft Inflatable, Water Float to Lounge Above Lake and River, Outdoor Water Tube Sport Fun, Recreational Use, Two Grip Handles, Cup Holder, Grab Rope

  • ULTIMATE COMFORT - With a spacious 53 inch diameter, 320 lb max weight capacity, and a headrest, the River Blazer makes lounging on the water like relaxing on your couch..
  • 2022 LATEST AIR VALVE TECH - Featuring the newest Boston valve technology, the valve has a double chamber that must be screwed clockwise to seal, completely preventing any air leaks from the valve..
  • NEW DOUBLE-SEALED SEAM - The seams along the River Blazer are folded along the edge, and then sealed. This creates a double reinforcing along the seams to prevent any air leaks along the stitching..
  • HIGH QUALITY THICK MATERIAL - Made with heavy duty PVC material, this river float is built to last. The PVC has an updated thickness (2022) and is puncture-resistant. It is BPA-Free and does not have phthalates..
  • FANTASTIC FEATURES – The River Blazer comes with two heavy-duty grip handles for maximum control. The built-in drink holder conveniently keeps your refreshment nearby. The grab rope can be used to anchor with other floats. The double stitched mesh bottom encourages air flow to keep your body cool. (Air pump not included).
Check Stock