Top Double Head Bolt Reviews

String Trimmer/Weedwacker TAP 'N Go Cutting for W25SBK Weed-Eater

  • Replaces Part Number: 537419211, 537419202, 596585805, 537419215.
  • Double Line For Mowing and Thinning, M10 x 1.25mm LHF Bolt Adapter Size.
  • The Nylon Line is Automatically Adjusted By Tapping The Weed Eater Head Against The Ground.
  • Fits For Poulan Weed Eater MX557, P4500, PP125 (Type 1, 2), PP136E (Type 1, 2), PPB200E (Type 1, 2), PPB32SST (Type 1, 2), PPB350 Gas Trimmers.
Check Stock

Backyard Discovery 10 Foot Wave Slide, Easy One Piece Installation, Yellow

  • 10' (118" actual length) Wave slide is compatible with deck heights of 53 to 60 inches high.
  • Age Range: 3 to 10 - Supports up to 250lbs.
  • Super deep wave slide (actual depth is 10") ensures children remain safe while sliding.
  • Mounting lumber not included - Recommended 5/8 x 1 3/8 x 20 3/8 inches.
  • Mounting hardware not included - Recommended rounded head 5/16” bolt with flat washers and a locking nut (Truss head, Carriage bolt, Pan head bolt would all work.).
  • Strong one piece construction with 3 bolt installation.
  • Limited Lifetime Warranty against cracking and fading.
  • Engineered to meet or exceed ASTM standards (code F1148-19) for intended use in private residential settings. Warranty is applicable for intended use only..
  • Assembled dimensions-118" x 23.5" x 18" - Shipping dimensions -118” x 17” x 26”.
Check Stock

Backyard Discovery 10 Foot Wave Slide, Easy One Piece Installation, Green

  • Compatible with deck heights of 53 to 60 inches.
  • Mounting lumber not included - Required 5/8 x 3/8 x 20 3/8 inches.
  • Mounting hardware not included - Rounded Head 5/16” Bolt x 1 ¼” long with flat washers and a locking nut (Truss head, Carriage bolt, Pan head bolt would all work. ).
  • One-piece construction for easy assembly.
  • Shipping dimensions -118” x 17” x 26”.
  • Limited Lifetime against cracking and fading.
  • Engineered to meet or exceed ASTM standards (code F1148-19) for intended use in private residential settings. is applicable for intended use only..
Check Stock

Rexka 15 pcs Fender Liner Bumper Cover Splash Shield Wheelhouse Liner Bolt Screw Compatible with GM 11570498 Chevrolet Camaro Colorado Corvette Cruze Equinox Silverado Malibu Traverse Cadillac Buick

  • Other Names:Wheelhouse Liner Bolt, Bumper Cover Bolt, Guide Bracket Bolt, Bumper Filler Bolt, Lower Cover Bolt, Flare Retainer, Flare Bolt, Splash Shield Bolt, Upper Cap Bolt, Lower Deflector Bolt, Lower Baffle Bolt, Bumper Cover Upper Bolt, Daytime Run Lamp Bolt, Upper Center Pillar Trim Bolt, Guide Bolt, Lower Grille Upper Bolt, Headlamp Assembly Bolt, Outer Bracket Screw, Reinforcement Bolt, Fog Lamp Assembly Bolt, Inner Grille Bolt, Side Retainer Bolt, Wheelhouse Liner Screw.
  • Other Names: Mount Bracket Bolt, Grille Assembly Upper Bolt, Corner Trim Bolt, Windshield Pillar Trim Bolt, Impact Bar Bolt, Bumper Cover Retainer, Side Impact Bag Bolt, Bumper Cover Lower Bolt, Side Cover Bolt, Center Duct Bolt, Lower Bracket Bolt, Tailpipe Extension Bolt, Absorber Bolt, Inlet Duct Bolt, Console Assembly Bolt, Upper Grille Bolt, Step Pad Bolt, Bracket Bolt, Grille Assembly Bolt, Vent Grille Bolt, Lower Absorber Bolt, Lower Support Bolt,Outer Brace Screw, Bumper Cover Screw,.
  • Replaces GM 11570498 ,Black Finish 4.2 - 1.41 x 20mm, 7mm Indented Hex Head, Loose Washer.
Check Stock

Carriage Bolt 18-8 Stainless Steel 1/2'-13 x 18' Qty-25

  • A carriage bolt has a domed or countersunk head and the shank is topped by a short square section under the head of the bolt..
  • The square section grips into the part being fixed, preventing the bolt from turning when the nut is tightened..
  • Carriage bolts are often used to fasten wood panels or board to masonry or to one another..
  • The square shank of the bolt allows it to lock into place when inserted into a round hole in wood or a square hole in a metal strap, the unthreaded square shank pulls into the wood creating a tight connection..
  • 18-8 Stainless steel is corrosion and rust resistant. 18-8 Stainless steel is considered the fastener industry standard..
Check Stock

Bolt Snaps Double Ended Hook Heavy Duty10 Sets of 3.5 inches, Zinc Alloy Trigger Chain Metal Clip Spring Hook Key Chain Pet Leash, Fasteners for Home Hammock for Garage Horse Feed Bucket

  • 【Package includes】10 stud buckles (3.5 inches)。.
  • 【Practical design】The double-head design makes the bolt snaps more versatile and versatile,Spring bolt ensures a safe closing and easy-to-open thumb lever。.
  • 【Wide range of uses】Designed for rope, door latch,Chain,belt buckle,seat belt,Animal leash,Diving hook clamp and suitable for harness,Home, farm, entertainment equipment,Garage, bucket hanger, hanging feeding bucket and many other unexpected uses。.
  • 【High-quality materials】The double hook is made of nickel-plated zinc alloy,Durable,Anti-rust,preservative,And can be used for a long time and reliable safety。.
  • 【Please don't overload】For safety reasons, please do not overload the work, the limit working load is 110 lbs..
Check Stock

Ives FB458 US26D Manual Flushbolt for Metal Door, Satin Chrome Finish

  • When the active door is opened, the lever can be moved to the ‘up’ position, retracting the bolt and allowing the inactive leaf to be opened.
  • When the inactive leaf is closed, the lever can be moved to the ‘down’ position, projecting the bolt into the strike and securely locking the inactive leaf.
  • Round bolt head requires only a punched hole.
  • Special design of guide and flat sided bolt tip to prevent bolt rotation.
  • Bolt throw is 3/4″ with a 7/8″ vertical adjustment.
  • Rod Length is 12″, which is measured from the center of the flush bolt body to the bolt tip.
Check Stock

Double Bolt Lock for Glass Sliding Doors - Advanced Technology to Keep Your Family Safe and Secure - High Security Lock - Virtually Burglar Proof

  • VIRTUALLY BURGLAR PROOF - Are you worried that someone might break into your house at the middle of the night or sometime of the day when nobody is home? Well that problem is no longer an issue. With its double locking action, it is virtually impossible to remove the door by lifting it off its track. The Cal Double Bolt patio door lock prevents criminals from being able to lift out sliding glass doors from their tracks..
  • NO NEED TO WASTE HOURS OF SETTING UP - The CAL Double Bolt Lock has a sleek, aesthetic, low profile design. As a result, the sliding glass door lock fits easily within the limited space available between the sliding glass door frame and the interior of the door panel. This amazingly simple device is EASY TO INSTALL and has been tested to provide over 1000 lbs of Forced Entry Load Tension. An easy step by step instructions are also included with the product..
  • DISCOVER NEW WAYS TO INCREASE CHILDREN SECURITY - With young children in the home, you know all too well how hard it is to keep an eye on them at all times. With the Cal Double Bolt child proof patio door lock installed, you can make sure that young ones do not become tempted to open the sliding glass doors on their own and expose themselves to potential danger..
Check Stock

T Track Hold Down Clamps Woodworking T Slot Clamp 20mm Dog Hole Clamp Quick Acting Aluminum Alloy

  • ...gs, fixtures and some fences that rely on a track system. Having a cam clamp on your router table fence makes is so much easier to make quick adjustments and quickly lock the fence in place..
  • The clamp body is made out of aluminum, measures approximately 1-1/2” long and each clamp has a standard 3” long hex head bolt that works with most standard sizes of t-track (depending on which size Cam Action Clamp you purchase). Be sure to get the correct size for your needs. Typically that means you should check to see what size slot or track you would like to use the clamps in..
  • The Cam Action Clamps are available in ¼” 5/16” and 3/8” hex head bolt sizes. Another nice feature of the Cam Action Clamps is that you can swap the bolts out for different situations..
  • For instance, if you have a slot requiring a T-bolt, you can switch out the ¼” hex head bolt with a ¼” T-bolt. Each cam can exert up to 400 pounds of clamp pressure depending on how you set it..
Check Stock

502pc Motherboard Standoffs Screw Kit | Basic Computer Screws Set for HDD Hard Drive, Case, Fan, Power Card, Graphics, Chassis, CD-ROM, ATX Case | for DIY & Repair

  • {502 Piece Kit} The Bolt Dropper PC Screw Kit contains more of the most used screws, nuts, washers, and chassis hand twist screws than others. This way you don’t run out during your build or repair. Other kits contain only a few chassis screws for your case, but Bolt Dropper contains more than double of the next leading brand. The 530-piece kit not only contains more quantity of each but also contains a larger variety & color of fasteners to help you find the right fastener for the right job..
  • {High Quality Screws} High quality screws with deep cut drives prevent stripping and snapping as well as ensuring a secure fit. When you’re constantly upgrading and removing parts, a screw that doesn’t strip is essential. Bolt Dropper’s precision-made fasteners add a layer of confidence knowing you can add and remove them time and time again without worry of ever stripping a head or snapping a screw..
  • {Great for Computer Building & Repair} Guaranteed to fit 99% of all PC building applications. Our kit is designed to fasten all components of a computer: Hard Drives, Cooling Fans, Chassis/Cases, Main Boards, Graphics Cards, Power Supply, DVD/Blu-ray Drives, everything inside! Whether you are a professional computer repairman or a first-t....
Check Stock

3.5 Inch Double Ended Bolt Snaps Hook Zinc Alloy Metal Spring Hook for Suspension Chain Clips Fasteners, 6 Pcs

  • Quantity: 6 Pcs 3.5inch double ended bolt snap hooks, sturdy and durable, It is very necessory for us to know the working load limit 50kg /110lbs, please do not overload,we care about the safety so much..
  • High-quality Materials: Our double ended bolt snaps are made of Nickel plated steel, Double-ended design makes bolt snaps more versatile, multifunction. Spring-loaded bolts easy to on and off..
  • Practical features: Double ended bolt snap hooks, Quick & simple to install, Provide maximum strength and heavy duty steadfastness,The Double snap hook can hold the pull of 110 pounds, Can be use to attached wires, cables or dog leashes..
  • Wide Application: such as pet collars, key chain, boating, rope, chain, straps, pet leashes and many other various uses..
  • After-Sales Services: We not only provide you with quality products, but also provide you with better after-sales services. If you have any concerns, please feel free to contact us, thank you..
Check Stock

Thinkpro 26Pcs Bolt Extractor Set and Drill Bit Kit, Multi-Spline Screw Extractors, Easy Out Broken Lug Nut Extraction Socket Set for Damaged, Frozen,Studs,Rusted, Rounded-Off Bolts, Nuts & Screws

  • Solid Construction: The Screw remover kit parts are precisely machined, and made of high-hardness chrome-molybdenum steel. Reverse spiral groove design bending down to provide maximum grip force to easily remove damaged bolts, nuts, and broken screws. The drill bits is made of HHS and the head is designed with a 135° angle. which is not easily worn and has strong penetration. Surface titanium nitride coating, effective anti-corrosion and rust prevention, extending service life..
  • Reverse Spiral Screw Extractors:Reverse spiral cutting cone extractors are designed to be driven into the head of a damaged bolt if its head is no longer usable and a wrench doesn’t “bite” it. The inside edges of the extractors are designed to “cut” into the damaged bolt’s head to allow it to rotate and ultimately extract it..
  • Widely Used: All premium industrial grade bolt extractors are strictly designed. The grip is firm, not easy to fall off, and provides more torque. Have been working around striped, rusted, stuck, and beheaded parts. Suitable for power drills, flat or allen wrenches, tap adapters. Its a must have for any mechanic or even a home owner when you have to assemble something or disassemble something that has a stripped o....
Check Stock

Fel-Pro ES 72856 Cylinder Head Bolt Set

  • Meets or exceeds all original equipment specifications.
  • Application specific design to ensure a perfect fit.
  • Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts.
  • Properly torque bolts per manufactures specifications.
  • Follow recommended tightening sequence for head bolts.
  • Check bolt length for correct application needed.
  • Follow all vehicle manufacturers recommendation procedures for head bolt replacement.
Check Stock