Top Double Flaring Tool Reviews

ABN Bubble Flare Tool & Double Flaring Kit – Tubing Bender Flare Tool & Pipe Cutter (1/8in to 5/8in / 3-16mm)

  • MAKE DOUBLE & BUBBLE FLARES: The ABN Double Flare Kit & Bubble Flaring Tool create flares for bending brake and fuel pipes, lines, braking pipe repairs, water, gas, refrigeration, and more.
  • Fixed head and angles make clean, precise flares.
  • Yoke type compressor with T-bar handle for firm grip.
  • For 3/16″, 1/4″, 5/16″, 3/8″, 1/2”, 4mm, 4.75mm, 6mm, 8mm, 10mm steel, aluminum, and copper tubing.
  • QUICK & PRECISE CUTS: Use the included small pipe cutter to cut 1/8-inch to 5/8-inch (3-16mm) steel, aluminum, and copper tubing.
  • Pull back the blade and revolve the pipe while compressing.
  • 2 rollers prevent skipping and jumping for most consistent tracking.
  • Cutting wheel life and adjustment amount for each turn of tool is directly proportionate to the hardness of material being cut.
  • BUILT TO LAST: Swivel constructed from chrome-plated alloy steel to reduce friction.
  • Yoke forged from heat-treated steel for maximum strength and longevity that resists corrosion.
  • EASY STORAGE: Heavy-duty 11.9” x 2.8” x 9.2” inch (30.2cm x 7.1cm x 23.4cm) plastic blow-molded carrying case with latches and handle for easy transportation, safe storage, and quick organization.
  • Includes double flaring and bubble flaring instruct....
Check Stock

ARES 18010 - Universal Hydraulic Flaring Tool Set - Create 45 Degree Single or Double Flares, ISO and DIN Bubble Flares, Push Connect Flares and GM Fuel Line Flares

  • INCLUDES: This Universal Hydraulic Flaring Tool Set includes one hydraulic flaring tool assembly, and all of the dies and adapters you need to create 45° Single or Double Flares, ISO/DIN Bubble Flares, Push-Connect and GM Fuel Line Flares in the following tubing sizes: 45-degree single or double flares in 3/16, 1/4, 5/16, 3/8, & 1/2-inch.
  • ISO/DIN bubble flares in 4.75, 6, 8 & 10mm.
  • Push-Connect type flares in 1/4, 5/16, 3/8, & 1/2-inch.
  • and GM style fuel line flares in 5/16 and 3/8-inch tubing..
  • DESIGN CONSIDERATIONS: This tool is designed to be used on- or off-car with a hydraulic cylinder, so you can create flares as efficiently as possible when and where you need them..
  • APPLICATIONS: This Universal Hydraulic Flaring Tool can be used to create 45-degree Single or Double Flares, ISO/DIN Bubble Flares, Push Connect-Style Flares and GM Fuel Line Flares in a wide variety of materials including steel and soft metal tubing. Whether you’re working on brake lines, transmission cooler lines, or fuel lines, this tool will help you create the flares you need quickly and easily..
  • RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance. If you have any issues with your ARES Universal Hydraulic Fla....
Check Stock

Durable Universal Hydraulic Pipe Expander Fuel Line Flaring Tool Set Dilator Scraper Cutter Hole Splint

  • Expanding & Flaring Functions: This hydraulic flare tool features 2-in-1 tube expanding and flaring functions with eight expanding dies(3/16", 1/4",....
  • Manual Hydraulic Mechanism: This flaring tool set achieves the pipe expanding and flaring with a hydraulic mechanism. The hydraulic tool is designed....
  • Pipe Cutting & Deburring: This flaring tool comes with one pipe cutter and one deburring tool, both of which are easy to use with the handwheel....
  • Durability & Portability: The flaring tool is made of durable hardened steel, which is reliable and built to last, saving your money. Besides, the....
  • Wide Application: This hydraulic flaring tool kit is suitable for expanding and flaring soft metal tubing and piping, such as copper and aluminum....
Check Stock

Wostore Flaring Tool Kit for Copper Pipe HVAC

  • The kit includes 1 flaring cone, 2 flaring bars, 5 swage fittings and 1 storage case..
  • Flaring tool apply to 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4" O.D.tubing..
  • Swage fittings are used to 3/16”, 1/4”, 5/16”, 3/8”, 1/2”, 5/8”,3/4" O.D. tubing, a rugged and durable flaring tool, swaging tool kit.
  • Versatile tool kit in a combination tubing flaring and swaging to fit all your needs..
  • This flaring kit swivel-type swaging adapters and flaring cone are made of the sturdiest steel and chromed for easy operation and precision. Plastic....
Check Stock

Eastwood Professional Brake Line Flaring Tool Kit | 45° Degree Single Double & Bubble Brake Tubing Flares | Use with Hydraulic Hose | Ideal for Stainless Steel Tube or Copper Pipe | Inc 4 Split Dies

  • MULTI USE FLARING TOOL: This is an all in one brake line flaring tool kit device. Easily create precision single flare, double flare, or a bubble in your tubing. A high quality OEM style flare is essential, as nobody likes leaks especially in hydraulic, or brake lines. With the Eastwood tubing flare tool you’ll always get quality reliables results time after time!.
  • HOW TO USE: Use stainless steel, steel, or any other soft metal like copper tubing of 3/16-inch, ¼-inch, 5/16-inch, 3/8-inch and 4.75-mm diameter. Meaning this tool is multi purpose and ready to help with automotive brake lines, hydraulic lines, or even with plumbing pipes. Next simply use the rotating turret style flaring die mount to create the suitable flare for your needs..
  • EASTWOOD QUALITY: Eastwood offers solutions which combines our 4,000+ unique products with the know-how to “Do The Job Right”. With an In-house product design, development and testing and a strong track record of high-quality, innovative products. Used and trusted by top builders to beginners and also provides a Lifetime Tech Support..
  • SAFETY INFORMATION: Always wear eye protection when operating the Flaring Tool as oils, grease and metal particles may be ejected while the tool is in operation. Make sure that th....
Check Stock

Mophorn Hydraulic Flaring Tool Kit with Tube Cutter Flare Tool Kit Deburrer Fuel Line 8PCS Swage Adapter Flaring Tool Kit for 3/16 to 7/8 Inch

  • Expanding & Flaring Functions: This hydraulic flare tool features 2-in-1 tube expanding and flaring functions with eight expanding dies(3/16″, 1/4″, 5/16″, 3/8″, 1/2″, 5/8″, 3/4″, 7/8″) and one flaring cone for 5-22 mm tubes. It is compatible with a single expanding die only, but it can satisfy your needs easily and efficiently..
  • Manual Hydraulic Mechanism: This flaring tool set achieves the pipe expanding and flaring with a hydraulic mechanism. The hydraulic tool is designed with exquisite details, such as non-slip PVC handles and no-leakage oil cylinder, to serve you well. You can easily operate this tool with no fatigue..
  • Pipe Cutting & Deburring: This flaring tool comes with one pipe cutter and one deburring tool, both of which are easy to use with the handwheel design. The pipe cutter cuts the pipes quickly with a solid and sharp blade. The deburring tool is used for cleaning the interior and exterior of tubing..
  • Durability & Portability: The flaring tool is made of durable hardened steel, which is reliable and built to last, saving your money. Besides, the flaring tool kit is stored in a plastic toolbox that is not easily broken, reducing the possibility of missing parts. It is compact and easy to carry..
Check Stock

Titan 51535 3/16-Inch Double Flaring Tool

  • Set Contents: (1) 3/16-Inch Double Flaring Tool with Removable Handle, (1) Positioning Bolt, (1) Double Ended OP1/OP2 Punch, (1) Container of Die Lubricant.
  • Creates a perfect inverted 45-Degree SAE double flare with 3/16-inch steel and nickel-copper tubing. Not recommended for use on stainless steel tubing..
  • Can be used on the vehicle! Compact design can be used in tight under-car spaces allowing user to repair brake lines in place on the vehicle..
  • Handle can be removed if you prefer to use in a bench vise..
  • SAE Double Flare is an inverted 45-Degree flare typically used in automotive brake line applications. 3/16-Inch brake lines are on almost all cars and trucks making this flaring tool usable with most vehicles..
Check Stock

Bonvoisin Flaring Tool 1/4”-3/4” HVAC Single Flare Tool 45° Eccentric Tube Flaring Tool with Clutch Limit Piece for Copper Aluminum Tubing (one piece)

  • [Eccentric Type Cone] - The eccentrically mounting hardened steel flaring cone produces a rolling action for even metal flow, giving uniform flare walls without wear. Applicable tube outer diameter: Φ1/4 ", 5/16", 3/8 ", 1/2", 5/8 ", 3/4".(NOTE: It will only do single flare - not double flare!).
  • [Limit Piece & Clutch] - (1)After inserting the copper tube, the length of the flared tube can be precisely limited by the limit piece, which is more efficient and convenient than measuring by eyes only. (2)There is a clutch in the rotating handle, which will automatically disconnect when the flaring operation is completed..
  • [Ultralight] - The tubing flaring tool is made of aluminum alloy and is very light. It's less than 1kg, so you can hold it and work for a long time without getting tired..
  • [Wide Application] - The tube flaring tool is applicable to soft metal tubes such as copper tubes / aluminum tubes. Widely used in electrical products, like HVAC, air conditioners, air heaters, refrigerators, etc..
  • [Packing List] - This flare tool includes the gantry * 1, inch-type flaring clamp * 1 (without a case)..
Check Stock

Tubing Flaring Swage Tool Kit - Heavy Duty Steel Swage Tool Set for Copper Plastic Aluminum Thin Pipe With Tubing Cutter Tubing Bender & Ratchet Wrench

  • Note: The picture is for reference only, the actual product shall prevail. Material:Aluminum alloy steel cutter body, surface plating..
  • Tubing Cutter: suitable for cutting pipe diameter between (3-28mm)1/8-inch to 1-1/8 Inch for Pipe Copper PVC Thin Stainless Steel Tube..
  • 3 in 1 Pipe Bender: Three sizes of tubing 1/4", 5/16" and 3/8". Bending 0-180 degree copper , aluminum ,brass,and thin stainless steel pipes in the....
  • Double Flaring Tool Kit:This flaring tool kit is an tool for pipe flaring, and it can be used to make single or double flares on copper, brass and....
  • Easy to Use:The Screw of the pipe cutters provide easy control of cutting pressure for clean cuts.Flare groove rollers make rotation simple and....
Check Stock

HVAC Flaring and Swaging Tool Kit Flares OD Soft Refrigeration Copper Tubin

  • HVAC Flaring and Swaging Tool Kit Flares OD Soft Refrigeration Copper Tubing.
  • This is a heavy duty steel Flaring and Swaging Tool Kit for flaring and Swaging copper tubing.With this Flaring and Swaging Tool Kit you can flare or....
  • Copper tubing flaring tool + copper tubing swaging kit in a combination tubing flaring./swaging kit to fit all your needs.
  • For 1/8",3/16",1/4",5/16",3/8",7/16",1/2",5/8"& 3/4" O.D. Tubing. 5 Swage Adapters For: 3-in-1 (3/16",1/4",3/8") ,5/16",1/2",5/8"& 3/4" O.D.Tubing.....
  • Swivel type Swaging adapters and flaring cone are hardened steel chrome finished for easy operation Self centering, slip-on forged steel yoke Blow....
Check Stock

Shankly Flaring Tool Set 9 Piece - Professional Grade Heavy Duty Brake Line Flaring Tool Kit and Swage Tool Flare Tool with Tubing Straightener or Cutter Not a Double Brake Flaring Tool

  • ✅ ALL-INCLUSIVE KIT: Shankly's standard flaring tool kit includes an all-inclusive professional tubing straightener or cutter, allowing the mechanic....
  • ✅ PRECISE AND CONVERTIBLE: This brake line flaring tool swivel-type swaging adapters and flaring cones are made of the strongest steel materials and....
  • ✅ MULTIFUNCTIONAL FLARE ADAPTERS: This is the only flaring tool set a mechanic will require because it includes flaring tool adapters in the....
  • ✅ FITS YOUR APPLICATION: Shankly's flaring tool or brake line tool includes five swage fittings and several useful tube sizes: 3/16”, 1/4”,....
  • ✅ SATISFACTION GUARANTEED: We stand by the word "quality" we assure you that your purchase of this heavy-duty brake line flaring tool or brake tool....
Check Stock

ARES 18019 - Double Flaring Tool Set with Extra Adapters- Use on Copper Aluminum Soft Steel Brake Line and Brass Tubing - Includes Mini Tubing Cutter and Storage Case

  • INCLUDES: This Double Flaring Tool Kit includes one 1/4-inch adapter, a 5/16-inch adapter, and a 1/2-inch adapter and two adapters in each of the....
  • QUALITY: The forged yoke is constructed from premium Heat Treated Steel, and the swivel is constructed of alloy steel with chrome plating to assist in....
  • APPLICATIONS: This versatile Double Flaring Tool kit can be used when flaring a double or a single flare in copper, aluminum, brass, magnesium, and....
  • RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance. If you have any issues with your....
  • ASPCA BUSINESS AMBASSADOR: We are proud to be part of the ASPCA Business Ambassador Program. If you have a pet, you realize they are more than a pet,....
Check Stock

VEVOR Brake Line Flaring Tool, 37 & 45 Degree Single, Double, and Bubble Flares for 3/16', 1/4', 5/16' and 3/8' Tube Size, Suitable for Soft Metal of Copper Lines

  • Four Tube Expanding Size: This brake line flaring tool includes 4 dies in the following sizes: 3/16 inch (4.75mm), 1/4 inch (6.35mm), 5/16 inch (8 mm), 3/8 inch (9.5 mm). It creates 37° and 45° single, double, and bubble brake flares in seconds. Reduce the friction on flares to ensure your vehicle operates at optimal performance..
  • Applicable Materials: This double flare brake tool is suitable for expanding copper and aluminum piping. It is an excellent tool for repairs on vehicles or taking lines off of a vehicle. Whether you're working on brake lines, transmission cooler lines, or fuel lines, our flaring tool will help you create the flares you need quickly and easily..
  • Leakproof Connection: With the turret-style design, the professional brake line flaring tool keeps all your dies ready. They are available and within immediate reach with the convenient turret carrier, greatly saving you the hassle of fumbling for small parts or losing them..
  • Vise-Mounted: The brake line flare tool is compatible with a bench-mounted vise in your workshop or on a hitch-mounted vise in the field (not intended for use under a car). The 6.3-inch (16 cm) T-handle screw clamp can hold the die and tube in place firmly without vibration. After repairing, your vehicle will be ....
Check Stock