Top Double Column Vertical Lathe Reviews

Slik Quick Release Plate for SBH-100DQ SBH-120DQ

  • SLIK A. M. T. alloy offers an exceptional strength-to-weight ratio more than 40% greater than similar tripods..
  • The easiest to use leg lock Lift lever to unlock, push lever to lock.
  • Releasing the Center Column Locking Collar frees movement of the Center Column, in both vertical and horizontal directions, which means you can work faster.
  • Choice of three different leg angles for quick set up on inclined or uneven ground.
Check Stock

TARION Tripod Extension Arm Horizontal Centre Column Boom 12.6 Extender 360° Rotatable Aluminum Alloy Swivel Lock with Counterweight Sandbag for Overhead Photography and Filming

  • This Tripod Horizontal Extension Arm includes a counter weight sandbag(empty) for a better playload and balance (Attention: Tripod not included).
  • This tripod boom arm supports 360° panorama shots and 180° vertical adjustment to be a small jib arm..
  • The playload of this tripod column is up to 17.6LB.
  • The tripod boom arm is equipped with professional 1/4'' and 3/8'' screw ballhead base, compatible with most tripods heads, tripod base with 3/8" screw....
  • This 12.6in long center column will be used as an extra center column to increase the shooting height.
Check Stock

Vanguard Alta Pro 263AB 100 Aluminum Tripod with SBH-100 Ball Head for Sony Nikon Canon DSLR Cameras Black

  • 26mm 3 section aluminum alloy legs adjust to 25, 50, and 80-degree angles to enable extreme low angle photography. Quick flip leg locks and rubber feet with retractable spikes.
  • Smooth fluid-like SBH-100 ball head rotates 360 degrees and includes quick release plate QS-39 and bubble levels.
  • The MACC (multi-angle central column) system allows you to move the central column from 0 to 180 degrees in various vertical and horizontal positions.
  • The Instant Swivel Stop-n-Lock (ISSL) system securely repositions the central column in one simple movement. Premium magnesium die-cast canopy, removable accessory hook, and anti-shock ring.
  • Specifications: Folded height: 28.2", Extended height: 68.2", Weight: 5.4 pounds. Max. load capacity: 15.4 pounds.
Check Stock

Mini Vertical Milling Slide Mounted on Z Type Caste Iron Angle Plate -Direct Fit for Mini Lathes

  • Small Vertical Milling Slide for Bench Small Lathes Suitable for Bench Lathes upto 150 mm Swing.
  • Base Dimension :50 x 55 mm * Sliding Table :90 x 50 mm * Vertical Travel 40 mm.
  • Tee- Slot width 9.5 mm Maximum *Jaw Opening : 70 mm * Adjustable Vice Jaws & Brass Gib.
  • Supplied with a Z type Angle Plate. Precision ground from all sides/ faces for perpendicularity/ squareness..
  • One base side of the Caste iron has 2 x Counter drills with suitable stud bolts to clamp the slide and the other has a continuous slot to fasten it through the lathe's toolpost stud. Check all pictures carefully.
Check Stock

Ultimate Woodturner's T-shirt with Lathe Chisel Gouge Skew

  • Do you enjoy wood turning everything from wood pens to wooden bowls on your lathe? Show your love for your craft, and your lathe, tools and the beautiful wood projects you create by wearing this funny t-shirt. Every woodturner, from a penturner to a spindle or bowl turner, would like this t-shirt as a gift. Design shows a lathe, chisel, gouge, skew, parting tool and the word TURN in a circle around the design. An industrial metal millwright tradesman in his machine shop would like this tee shirt.
  • Lots of shirt sizes for: men, women, adults, teens, tweens, youth. Available in several Tshirt Colors. Great gift for family, friends, boyfriend, girlfriend, co-workers, hobbyist, crafter. Funny gift for men, women, teens. Good for all gift giving occasions: Birthday, Father's Day, Mother's Day, Graduation. Wear at home, to work, in your workshop, or the gym..
  • Lightweight, Classic fit, Double-needle sleeve and bottom hem.
Check Stock

Vanguard Alta Pro 263AB 100 Aluminum Tripod with SBH-100 Ball Head for Sony Nikon Canon DSLR Cameras Black & QS-39 Quick Release Plate

  • Product 1: 26mm 3 section aluminum alloy legs adjust to 25, 50, and 80-degree angles to enable extreme low angle photography. Quick flip leg locks and....
  • Product 1: Smooth fluid-like SBH-100 ball head rotates 360 degrees and includes quick release plate QS-39 and bubble levels.
  • Product 1: The MACC (multi-angle central column) system allows you to move the central column from 0 to 180 degrees in various vertical and horizontal....
  • Product 1: The Instant Swivel Stop-n-Lock (ISSL) system securely repositions the central column in one simple movement. Premium magnesium die-cast....
  • Product 2: Quick release plate for select/specific Vanguard tripods and heads only.
Check Stock

DayMinder Weekly Appointment Book / Planner 2016, 8 x 11 Inch Page Size, Burgundy (G520-14)

  • Weekly appointment book / planner has 12 month date range from January – December with Julian dates.
  • One week per two page spread is column style, with one vertical column for each day to keep you on track.
  • past, current and two future month calendar blocks are shown across the top for date reference.
  • Quarter-hourly appointment times are listed from 7:00 a.m. - 9:45 p.m. Monday – Friday and 7:00 a.m. - 6:45 p.m. on Saturday. Sundays are untimed for leisure..
Check Stock

iCOVER 40 inch Electric Smoker Cover-600D Heavy Duty Canvas Waterproof BBQ Smoker Grill Cover for Char-Broil Dyna-Glo Masterbuilt Pit Boss Smoker Square Patio Fire Column Cover

  • 【Sized for Most Vertical Electric Smokers】22″(width)x22″(depth)x40″(height), this 30inch smoker cover is compatible with most vertical electric smokers. Fits Char-broil vertical electric smokers up to 22″ wide like models 14202002, 14202004, 15202043.
  • Fits char-broil digital electric smoker 725 square inch (standard and deluxe) and Smoke Hollow 26142E 26-INCH Electric Smoker.
  • Fits Dyna-Glo smoker models DGU505BAE, DGU505BAE-D & DGU732BDE & DGU732BDE-D, DGU732SDE & DGU7321SDE-D..
  • 【Fits Masterbuilt/ Pit Boss Smoker/Fire Fit】 This vertical smoker cover fits Masterbuilt 20078715 electric digital smoker front controller, Masterbuilt 20070910 30-inch electric digital smoker, top controller, Masterbuilt smoke hollow PS40B propane smoker；Fit Pit Boss 2 and 3 series digital electric smoker,PBV2D1,PBV3D1.
  • Fits pit boss 2 series analog electric smoker,PBV2A1.
  • Fits Square Patio Fire Column, outdoor square fire pit.
  • Propane column fire pit cover, outdoor square fire place cover.
  • 【600D Heavy Duty Oxford Fabric】Made of 600D Heavy duty oxford polyester with water resistant PVC coating, water repellent and anti-UV finish, easy to withstand tearing, fading, wetting and cold cracking, keeping your grill protected fro....
Check Stock

CXOYLL Z011A 4-Jaw Chuck for Mini Lathe, Self Centering Mini Lathe Chuck with L-Shaped Wrench, Zinc Alloy Chuck Clamp Accessory Inner Clamping Diameter 1.8-56mm (Silver)

  • 【Z011A 4-Jaw Chuck, FourJaw Mini Lathe Chuck】- 1. 4-jaw design, compact size, easy to use. The Mini lathe tools 4 Jaw Chuck has a large clamping range. Outer diameter about 12 mm-65 mm, Inner diameter: about 1.8mm-56mm..
  • 【Woodworking Accessories Self-centering 4 Jaw Lathe Chuck】- The self-centering lathe part contains a delicate oblique angle gear and pinion gears. They contribute to precise processing progress. Widely used for woodworking lathe..
  • 【Scope Applications of the Zinc Alloy Mini Lathe Chuck】- The 4 Jaw design Lathe Chuck is made of high quality zinc alloy material, wear-resistant, strong and durable. Mainly used for mini metal lathe. Since the changeover and setting time is cut, your lathe can work with higher efficiency..
  • 【Practical Lathe Accessories Self Centering Mini Chuck】- The lathe chuck has an automatic centering function, so it does not need to be repeatedly calibrated during installation. It only needs to be installed in the correct order, which is simple, fast, and convenient..
  • 【Package included】- 1 x Lathe Chuck, 1 x L-shaped Wrench.
  • The 4 Jaw lathe chuck is widely applied to Mini metal lathes for the general turning of shafts and some more delicate materials. It would be the perfect choice for your lathe machin....
Check Stock

Adjustable Double Bearing Live Center Revolving Center DIY Parts for Mini Lathe Machine Woodworking Tool

  • Lathe Machine DIY Parts: Mini Lathe Machine Woodworking Tool is ideal for using in domestic lathe woodworking lathe miniature car tools and other tools.spur center for wood lathe.
  • High Quality: Mini Lathe Machine Woodworking Tool is made of mental material, good heat resistance, high mechanical strength and durable.mini lathe live center.
  • Adjustable: Holing depth can be regulated and adjustment.live center for wood lathe.
  • Easy To Use: High precision, high hardness, highly efficient.wood lathe.
  • Size: Compact, easy to operate. Tip height: 27mm(appr.), Tip stretchable length: 30mm(appr.), Size: (L) x (W) 10 x 4.3 cm / 3.94" x 1.69"(appr.)..
Check Stock

OrangeA K11-200 Lathe Chuck 8 Inch 3 Jaw,Self Centering Chuck Hardened Steel Jaws,Internal External Grinding for Lathe Drilling Milling Machine

  • Quality Material: The lathe chuck body is made of high-quality hardened steel, and the hardness test of the jaws and guides is HRC58-62. It has high strength and toughness, compression resistance and durability, and long service life..
  • High Precision: The wood lathe chuck jaws and three jaws are self-centering, the alignment accuracy is less than or equal to 0.002" / 0.05 mm, and no adjustment is required after installation. The high precision design of the chuck bevel gear guarantees the accuracy of the chuck operation..
  • Double Jaw Chuck Jaws: Internal jaw is a positive L-shape, and external jaw is an inverted L-shape. The clamping range of this chuck is between 0.16" / 4 mm - 7.87" / 200 mm, which is suitable for clamping a variety of industrial parts..
  • Fast Clamping Speed: The 3 jaw lathe chuck has an automatic centering function, so it does not need to be repeatedly calibrated during installation. It only needs to be installed in the correct order, which is simple, fast, and convenient..
  • High Adaptability: The accessory screws make the scroll chuck highly adaptable and can be used with the same series of jaws as the chuck. This power lathe chuck is suitable for clamping various parts such as hanging shafts, disks, equilateral triangles, etc..
Check Stock

OrangeA K11-250 Lathe Chuck 10 Inch 3 Jaw, Self Centering Chuck Milling Hardened Steel, Internal External Grinding for Lathe Drilling Milling Machine

  • Quality Material: The lathe chuck body is made of high-quality hardened steel, and the hardness test of the jaws and guides is HRC58-62. It has high strength and toughness, compression resistance and durability, and long service life..
  • High Precision: The wood lathe chuck jaws and three jaws are self-centering, the alignment accuracy is less than or equal to 0.002" / 0.05 mm, and no adjustment is required after installation. The high precision design of the chuck bevel gear guarantees the accuracy of the chuck operation..
  • Double Jaw Chuck Jaws: Internal jaw is a positive L-shape, and external jaw is an inverted L-shape. The clamping range of this chuck is between 0.24" / 6 mm - 9.84" / 250 mm, which is suitable for clamping a variety of industrial parts..
  • Fast Clamping Speed: The 3 jaw lathe chuck has an automatic centering function, so it does not need to be repeatedly calibrated during installation. It only needs to be installed in the correct order, which is simple, fast, and convenient..
  • High Adaptability: The accessory screws make the scroll chuck highly adaptable and can be used with the same series of jaws as the chuck. This power lathe chuck is suitable for clamping various parts such as hanging shafts, disks, equilateral triangles, etc..
Check Stock

SIRUI Carbon Fiber Travel Tripod Compact Lightweight Slik Tripod with B00K Head Arca Swiss Plate Load 8kg/17.6lbs Weight 2lbs Folded Height 13 Traveler 5CX

  • ... of 12.4". 3-position leg angle adjustment system can provide flexible shooting for different photography scenarios and conditions..
  • 360 Degree Ball Head and Panoramic View - With two independent control knobs, the specially designed ball-head can rotate 360° allows you to take photos at any angle in horizontal and vertical directions, making it easy to take panoramic photos and video shooting. Quick release plate with standard 1/4" screw for fast camera connection, compatible with almost all mirrorless cameras..
  • Multi Angle Shooting - The center column removable function ensures extreme low angle photography and macro shooting. When the center column attached to the tripod, twist the column lock to adjust the column for additional working heights..
  • Easy to Carry - Light-weight but durable, the portable tripod legs can be inverted and folded back 180 degrees, saving length to 12.4" compact storage size, also comes with a portable bag, which is easy to carry and pack for travel..
Check Stock