Top Dock Rope Pulley Reviews

Pulley Wheel Stainless Steel Small Pulley Block 360 Degree Rotating Silent Cable Pully Load Bearing Mechanical Pulleys, Silver (Silver-2)

  • Material:Pulley wheel is made of high-quality stainless steel, which is strong, rust-proof, wear-resistant and corrosion-resistant.
  • Whirling:Top of pulley system 360 degrees whirl to prevent the rope from twisting, maintain a stable cable pulley block,load bearing.
  • Quiet:Rope puller smooth sliding, small high-quality nylon slot double bearing design pulley pro does not produce noise.
  • Install:Pulley hoist can be installed on wood, wall and metal, rope pulley suitable for home fitness or outdoor work.
  • Gym pulley system:Pulley attachments specially designed for home gym pulley system DIY, construction, cable hoisting etc.
Check Stock

Rope Ratchet 10025 3/8" Block and Tackle Ratchet Tie Down, Rope Hoist Pulley Hoist, with 15' Solid Braided Polypropylene Rope, 250lb Weight Capacity

  • THE BEST: The easy-to-use 3/8″ ROPE RATCHET is the answer to all your tie-down needs for work or play. Whether you need a block and tackle, ratchet tie down, rope pulley, or hoist pulley we got you covered..
  • BUILT TOUGH: The patented design and rugged construction lets you secure a wide variety of loads quickly and easily. Every ROPE RATCHET is made super tough rope so you can depend on it to work as a pulley hoist, rope puller, rope hook, or rope hoist. Every ROPE RATCHET is made super tough so you can depend on it to take all the hard work you do. Weight Capacity is 250lbs..
  • SAFE & SECURE: Your load stays secure because the rope automatically locks in place with every pull and stays locked until you release it by pushing the convenient Thumb Release Lever. Comes with 15′ Solid Braided Polyester Rope..
  • SAFE & SECURE: Your load stays secure because the rope au....
Check Stock

GM CLIMBING 29kN CE UIAA Certified Micro Pulley Slack Tender for Hitch Tending

  • GM CLIMBING Fixed Micro Pulley, rated at 29kN, CE and UIAA certified, works with ropes up to 0.47in/12mm. A functional pulley to advance hitches in Ddrt climbing systems, to tend hitch slacks on work-positioning lanyards.
  • Makes an efficient redirect in light rigging, hauling, mechanical advantage systems..
  • EASY USE! It's quick to install the rope on the micro pulley due to the fixed side plates. The oval-shaped carabiner is recommended to be used with. Pocket size allows easy operation on your palm to set up various climbing or rigging configurations..
  • 29kN strength rating! Fixed micro pulley offers full strength in lightweight of 3.05 Oz, capable of being an efficient part of your tree climbing, adjusters of work-positioning lanyards, and self-rescue pulley systems. CE and UIAA certified ensures a safe pulley for activities at height and in-depth..
  • Smooth rotation due to the sheave being mounted with self-lubricating bushing that is efficient for transporting heavy loads. Aluminum plates with chamfer rounded edging reduce wear on the textile gears, well protecting ropes sliding through..
  • A quality-made micro pulley, most seen its functions in tending hitches in climbing techniques, reducing wear when installed on the climbing harness rope bridge. Also a....
Check Stock

GM CLIMBING Pack of 2 29kN CE UIAA Certified Micro Pulley Slack Tender for Hitch Tending

  • GM CLIMBING Fixed Micro Pulley, rated at 29kN, CE and UIAA certified, works with ropes up to 0.47in/12mm. A functional pulley to advance hitches in Ddrt climbing systems, to tend hitch slacks on work-positioning lanyards.
  • Makes an efficient redirect in light rigging, hauling, mechanical advantage systems..
  • EASY USE! It's quick to install the rope on the micro pulley due to the fixed side plates. The oval-shaped carabiner is recommended to be used with. Pocket size allows easy operation on your palm to set up various climbing or rigging configurations..
  • 29kN strength rating! Fixed micro pulley offers full strength in lightweight of 3.05 Oz, capable of being an efficient part of your tree climbing, adjusters of work-positioning lanyards, and self-rescue pulley systems. CE and UIAA certified ensures a safe pulley for activities at height and in-depth..
  • Smooth rotation due to the sheave being mounted with self-lubricating bushing that is efficient for transporting heavy loads. Aluminum plates with chamfer rounded edging reduce wear on the textile gears, well protecting ropes sliding through..
  • A quality-made micro pulley, most seen its functions in tending hitches in climbing techniques, reducing wear when installed on the climbing harness rope bridge. Also a....
Check Stock

Werner Ladder Rope, Pulley, Flipper Kit

  • Werner Extension Ladder Rope, Pulley, & Flipper Kit.
  • Contains one 31-12 pulley, one AC30-2 Rope, one 29-1 flipper set.
  • Replace rope, pulley, and flippers to have your ladder work like new.
  • works with all Werner Aluminum and Fiberglass Extension ladders.
Check Stock

Groove Wheel Pulley Stainless Steel Pulley Block Super Silent Single Pulley Block for DIY Gym Equipment,Sliding Gate Detachable Duplex Bearing with Mounting Screws and Expansion Pipes U Type (1 Pack)

  • ✅【Powerful Stainless Steel Pulley Block】Each U Type Single Wheel Pulley Block has 4 mounting holes and the diameter of each hole is 7mm, which fits for 3-12 mm width flat belt. It can be mounted on various walls, wood and metal. (Equipped with 4 pcs 6*40mm self-tapping screws and 4 pcs 10*60mm yellow expansion pipes.).
  • ✅【Superior Groove Wheel】The Single Wheel Lifting Rope Pulley Block is made of high quality stainless steel, which is durable and easy to clean. The thickened steel plate enhances the bearing capacity of the Rope Pulley, which can carry up to 800 pounds..
  • ✅【Super Mute Duplex Bearing Design】The Silent Duplex Bearing can greatly reduce the friction of the cable pulley and make the cable pulley rotate smoothly and stably. You can hardly hear the sound when it works..
  • ✅【Wide Application】The Wall Mount Pulley Block is widely used for home fitness, wire rope traction, DIY attachment for home gym pulley system, inverted track, lifting blocks, ladder lift, gym equipment, rolling gate sliding gate and other outdoor works..
  • ✅【Easy Installation】The pulley is designed for easy installation. You just need to mark the hole location, drill 4 holes with a 10 mm drill bit in the wall and insert the yellow expansion pipe....
Check Stock

Groove Wheel Pulley Stainless Steel Pulley Block Super Silent Single Pulley Block for DIY Gym Equipment,Sliding Gate Detachable Duplex Bearing with Mounting Screws and Expansion Pipes U Type (2 Pack)

  • ✅【Powerful Stainless Steel Pulley Block】Each U Type Single Wheel Pulley Block has 4 mounting holes and the diameter of each hole is 7mm, which fits for 3-12 mm width flat belt. It can be mounted on various walls, wood and metal. (Equipped with 8 pcs 6*40mm self-tapping screws and 8 pcs 10*60mm yellow expansion pipes.).
  • ✅【Superior Groove Wheel】The Single Wheel Lifting Rope Pulley Block is made of high quality stainless steel, which is durable and easy to clean. The thickened steel plate enhances the bearing capacity of the Rope Pulley, which can carry up to 800 pounds..
  • ✅【Super Mute Duplex Bearing Design】The Silent Duplex Bearing can greatly reduce the friction of the cable pulley and make the cable pulley rotate smoothly and stably. You can hardly hear the sound when it works..
  • ✅【Wide Application】The Wall Mount Pulley Block is widely used for home fitness, wire rope traction, DIY attachment for home gym pulley system, inverted track, lifting blocks, ladder lift, gym equipment, rolling gate sliding gate and other outdoor works..
  • ✅【Easy Installation】The pulley is designed for easy installation. You just need to mark the hole location, drill 4 holes with a 10 mm drill bit in the wall and insert the yellow expansion pipes in the....
Check Stock

ZOENHOU 4 PCS M50 Loading 881Lbs / 400Kg Single Pulley Block, 304 Stainless Steel Single Pulley Roller with Rotatable 360°Pulley and Rings, Heavy Duty and Smooth Rope Pulley Block for Rope Lifting

  • SOLID & DURABLE - The single pulley block is made of high quality 304 stainless steel. It has a beautiful appearance. The single pulley adopts solid in design, very sturdy and durable, anti-rust, wear-resistance, and corrosion-resistant..
  • ROTATABLE 360° & SMOOTH - The silver pulley roller with rotatable 360° pulley and rings. It can prevent ropes, cables, wires from knotting, the pulley is smooth and is easy to use. The rope, climbing buckle, or maintenance hook can be easily passed through the top ring..
  • EASY TO USE & WIDELY USAGE - These rope pulleys will work very well for suspending antennas from trees and easy to adjust. You can also use them to hoist a metal pail full of stuff up and down, to raise and lower the bird feeder so much safer than getting on a ladder. They are smooth and don't get stuck..
  • HOW TO MAINTAIN - The rope pulley block is well made and very sturdy. It could easily accommodate many different diametral lines. To increase the more smoothness you can add some lubricant to the single pulley roller after using..
  • PACKAGE INCLUDE & PRODUCT SIZE - The package comes with 4 M50 single pulley blocks, the height of the small pulley is 2 inch (50.8mm) and the width 0.53inch (13.5mm). The inner width of the ring is 0.77 inch (19.5mm). The c....
Check Stock

10Pcs 304 Stainless Steel M15 Single Pulley Block, Wire Rope Hanging Wire Towing Wheel, with 10Pcs Spring Snap Hook

  • ▶Material◀: The pulley is made of 304 stainless steel with strong structure, anti-rust, wear-resistant, high temperature-resistant, moisture-proof. It can be used continuously without fear of damage..
  • ▶Easy to Use◀: Rotation cylinder head is solid, 360 degrees rotation to prevent rope from knotting, smooth turning wheel. You can quickly combine single pulley block and spring snap hook..
  • ▶Dimension◀: M15 Single Pulley Size: Length: 2.44in(62mm), Width: 0.83in(21mm), Max Load: 80 lbs(36kg). Spring Snap Hook: Max Load: 119 lbs(54kg)..
  • ▶Wide Applications◀: Widely used in tractive effort of steel wire rope or other rope tools, such as rope suspension traction in indoor and outdoor applications: camping, hiking, fishing, equipment gear, fitness, hanging wheel, mountaineering, etc..
  • ▶Packaging Includes◀: 10Pcs M15 stainless steel single pulley, 10Pcs stainless steel spring snap hook..
Check Stock

2Pcs 304 Stainless Steel M25 Single Pulley Block, Wire Rope Hanging Wire Towing Wheel, with 2Pcs Spring Snap Hook

  • ▶Material◀: The pulley is made of 304 stainless steel with strong structure, anti-rust, wear-resistant, high temperature-resistant, moisture-proof. It can be used continuously without fear of damage..
  • ▶Easy to Use◀: Rotation cylinder head is solid, 360 degrees rotation to prevent rope from knotting, smooth turning wheel. You can quickly combine single pulley block and spring snap hook..
  • ▶Dimension◀: M25 Single Pulley Size: Length: 3.31in(84mm), Width: 1.18in(30mm), Max Load: 330 lbs(150kg). Spring Snap Hook: Max Load: 330 lbs(150kg)..
  • ▶Wide Applications◀: Widely used in tractive effort of steel wire rope or other rope tools, such as rope suspension traction in indoor and outdoor applications: camping, hiking, fishing, equipment gear, fitness, hanging wheel, mountaineering, etc..
  • ▶Packaging Includes◀: 2Pcs M25 stainless steel single pulley, 2Pcs stainless steel spring snap hook..
Check Stock

GM CLIMBING 40kN Micro Double Pulley Prusik Minding Ball Bearing UIAA CE for Progress Capture System Rigging Hauling Rescue Arborist Tree Climbing

  • 40kN Micro Double Pulley with Swing Plates from GM CLIMBING for you to easily set up most pulley systems while largely lighten your rack. Light, compact, and durable, compatible with rope up to 12mm, CE and UIAA certified. Super power double pulley for you in a wide variety of applications, like general rigging, hauling, dragging system, rescue, tree climbing, mountaineering, etc..
  • Easier rope installation and removal due to swing side plates. You don't have to thread rope from end to end, much facilitate the set-up progress of system. Prusik minding plates and sheaves efficiently tend prusik of progress capture system..
  • The closing style of connecting point qualifies the pulley to be compatible with most kinds of carabiners. Large connecting space, enough for 2 carabiners attachment. Bottom becket creates additional attachment point, simplifying the whole system..
  • Adoption of ball bearing sheave assures a nicely smooth rotation as well as keep up to its maximum efficiency..
  • Certified and conforming to CE EN 12278 (for pulley), Rating to 40kN=2 x (10kN+10kN) breaking strength. 36mm / 1.41in sheave diameter, provides high pulley efficiency for all you need for a pulley, no matter in arborist applications, or pulling a stranded boat, hauling some out of a ....
Check Stock

GM CLIMBING 40kN Micro Double Pulley Prusik Minding Ball Bearing UIAA CE for Progress Capture System Rigging Hauling Rescue Arborist Tree Climbing (Pack of 2)

  • 40kN Micro Double Pulley with Swing Plates from GM CLIMBING for you to easily set up most pulley systems while largely lighten your rack. Light, compact, and durable, compatible with rope up to 12mm, CE and UIAA certified. Super power double pulley for you in a wide variety of applications, like general rigging, hauling, dragging system, rescue, tree climbing, mountaineering, etc..
  • Easier rope installation and removal due to swing side plates. You don't have to thread rope from end to end, much facilitate the set-up progress of system. Prusik minding plates and sheaves efficiently tend prusik of progress capture system..
  • The closing style of connecting point qualifies the pulley to be compatible with most kinds of carabiners. Large connecting space, enough for 2 carabiners attachment. Bottom becket creates additional attachment point, simplifying the whole system..
  • Adoption of ball bearing sheave assures a nicely smooth rotation as well as keep up to its maximum efficiency..
  • Certified and conforming to CE EN 12278 (for pulley), Rating to 40kN=2 x (10kN+10kN) breaking strength. 36mm....
Check Stock

FitBeast Pulley System Gym, Cable Weight Pulley System for Gym LAT Pulldown, Biceps Curl Workout, Ideal Home Gym Equipment for Forearm, Shoulder, Strength Training

  • SOLID & SAFE PULLEY SYSTEM ---- FitBeast pulley system gym cable is composed of 6 strands of steel rope, which is safe and not easy to break. The thickened protection ball will effectively avoid the danger caused by the sudden sliding of the device. The loading pin adopts welding technology to prevent the tray from falling off after being stressed..
  • LOADING UP TO 330LBS ---- FitBeast pulley system gym uses an extra long loading pin, so you can load more Olympic weight plates. The 330lbs max load-bearing meets your weight training needs. Besides, we install an anti-collision sponge on the loading bin, which can protect your floor from damage..
  • EASY TO ADJUST & SET UP ---- The FitBeast weight pulley system has two cables (70inch, 90inch). The pulley rotates 360-degree to prevent the rope from twisting. You can install the pulley system to the power frame, the upper tie rod, the cross beam, and any place where the belt can be tied..
  • VARIETY TRAINING METHODS -----The FitBeast cable pulley system comes with 3 different handles: tricep rope, exercise handle, and adjustable lat pull-down bar. With different installati....
Check Stock