Top Diy Steel Cable Railing Reviews

Senmit Cable Railing Post - Stainless Steel Square Fence Post for Deck Cable Railing System, Flat top 36\x 1\x 2\ Level Pre-Drilled, Matte Black

  • 【Create 36” height 1/8 cable railing systems】: Horizontal cable railing systems usually have cables attached to Stainless steel posts. This configuration creates clean lines that practically disappear into the background..
  • 【STRENGTH & ELEGANCE】: Matte black finishing - Pre-drilled holes on adjacent surface with standard 3” distance. Design for invisible cable railing system. Steel post can be installed on steps and staircases for patio, balcony, porch, garden, residential building, commercial office building, hotel, garage etc..
  • 【Made of High Quality 304 Stainless Steel】: High hardness, impact resistance, not easy to deformation. Excellent waterproof and corrosion resistance, strong anti-oxidation ability, durable for long-term exterior deck cable railing..
  • 【Easy to Install & DIY】: A flat top bracket is attached, suitable for flat bottom handrail, stable and simple. The holes on the post are 10.5 mm, Recommended Use Senmit invisible cable railing kit.
  • 【Accessories & Dimensions】: Include ① 1PCS Stainless Steel Posts - 2" × 1” × 35” (Rectangle width × Height).
  • ②1PCS Foot Cover ③4PCS M8 lag screws for wood surface.
Check Stock

Muzata 20Pack Stainless Steel Angle Beveled Washer 25 30 35 Degrees ID 5/16” for Cable Railing Kit Deck Stair Railing Wood Metal Aluminum Posts T316 Marine Grade CR58

  • IMPORTANT to know before purchases - Angle beveled washer CR58 is ONLY compatible with 1/8" cable railing thread studs (Muzata CR42 CR50 CR52) and 3/16" cable railing kit CR53. Please note that ONLY thread studs require angled washers while the lag screw doesn’t. For other models and compatibility, please check picture 2 to find the matched washers and cable railing kits you need.
  • For 25-35 degree stairs - This T316 stainless steel angled washer is specially designed to act as a filler between the cable railing kit and the end post on 25 30 35 degrees staircase. The inner diameter of CR58 is 5/16", suitable for 1/8" 5/32” 3/16" cable railing kit with outside diameter less than 5/16" in 25 30 35 degrees staircase cable railing system. The package includes: 20 packs of angle beveled washers.
  • Easy Installation and marine grade -This angle beveled washer is perfect for DIY a clean and neat cable railing project. It is easy to install, especially for beginners. This angled washer is made of T316 marine grade stainless steel, which has excellent durability and strong resistance to rust and corrosion, and extreme weather.
  • Pre-Designed System - We pre-designed a cable railing system to help you construct a 1/8" cable railing system, which includes tension....
Check Stock

kjxxkj Stainless Steel Right&Left Handed Thread Swage Lag Screws for Wood Post of 1/8 inch Cable Railing Kit,Decking Railing Hardware,DIY Baluster Kit (30 Pairs）

  • This cable railing kit include 30-pcs right and 30-pcs left hand thread lag screws.
  • Kit made of T316 –stainless steel，So it can be used indoor and outdoor；.
  • This deck railing hardware fit 1/8-inch OD cable of railing system，The thread screws were designed for wood post，Length of lag screw is 4 inch and length of its thread is 2 inch；.
  • This swage lag screws used Integrated design，So this kit will make your installation more easier、beautiful and secure, But connection of cable with lag screws need by using hydraulic crimper；.
  • Note：Length of cable should be 1.5 inch shorter than wood post edge distance（as shown in fig.3).
  • If you want To DIY a high quality railing system，Standard 1/8 in(OD) cable which was made of T316-stainless steel is recommended(Please seach B0798NLB8L to purchase the right cable).
  • By the design of Right&left handed thread, Of course it can be used to adjust the tightness of cable, So the turnbuckles are not needed in the railing system, And this cable railing can’t be easily unfixed and damaged by outsiders..
Check Stock

Steel DN Mate 60 Pack T316 Stainless Steel Left&Right Handed Thread Swage Lag Screws for Wood Post of 1/8' Deck Railing Kit, Cable Railing/Stair Deck Railing, DIY Hardware Kit, Wrench Included DM60

  • New deck railing design, clean and elegant. This cable railing kit includes 30 pcs left, 30pcs right hand thread lag screws, 1 patent design wrench, and 2 drill bits. Stainless Steel T316 material, anti-rust ,water and corrosion, marine Grade, good for indoor or outdoor usage. With our new made wrench, installation becomes much easier..
  • This deck railing hardware fit 1/8″ OD cable of railing system. The thread screws are designed for timber/wood post. It will rotate the wire rope in the same direction, which resolves the problem of twisting the attached wire. Products without Left & right will bring you hassle and might damage the cable..
  • Length of cable should be 1-1/2″ shorter than wood surface distance（as shown in pic.4).
  • if you want to DIY a high quality cable railing system, standard 1/8″ (OD) cable which was made of T316-stainless steel is recommended. Please search on amazon” B0B71J2DXD” if you need black lag screws..
  • By the design of Right&left handed thread, of course it can be used to adjust the tension of attached cable, so the turnbuckles are not needed in the railing system. And this cable railing won’t be easily unfixed or destroyeded..
  • The lag screws could be drilled into wood to adjust the tightness without extra turnbuckle ....
Check Stock

Wayska 60 Pack T316 Marine Grade Stainless Steel 30 Degree Angle Beveled Protector Sleeves, Wood Post Protector for 1/8" Wire Rope Cable Railing, Come with a Free Drill Bit

  • 【High Quality Material】- This 30 degree 1/8” wood post protector is made of T316 marine grade stainless steel, high tensile strength, anti-fatigue strength and waterproof. It is corrosion-resistant which makes our balustrade hardware suitable for coastal installations. Cable railing system requires hardly any maintenance. .
  • 【Compatibility & Parameter】- These stainless steel protector sleeves suitable for 1/8”cable railing, perfect for outdoor and indoor cable railing system. Tilt Angle = 30 Degree, Overall Length of Sleeve = 1.1", Sleeve Diameter=0.28"，Flange Diameter =0.58"(The longest diameter of an ellipse)/0.51"(The shortest diameter of an ellipse), Drill Bit Diameter = 7mm..
  • 【Easy to Install】-This high quality metal is built to withstand extreme coastal and corrosive environments. Choose between kits for metal post or kits for wood posts. Easy to install and provides a stylish and contemporary finish to any project, whether used indoors or outdoors, residential or commercial..
  • 【Package Content】- 60pcs 30 degree angle cable protector sleeves + 1pcs drill bit..
Check Stock

650FT 1/8” T316 Premium Stainless Steel Deck Cable Railing Kit with Cutter & Gloves, 7x7 Strands Construction, Cable Railing Hardware System, Stair Railing, Wire Rope Aircraft Cable for Hanging

  • ✔️ SUPERIOR DECK RAILING CABLE FOR HOME: Our wire rope is made of high-strength T316 stainless steel material, wear-proof and rust-resistant, with no worry of corrosion. It’s made heavy-duty, ensuring excellent durability and longevity. A cable cutter and a pair of gloves (included) help you install quickly and safely. Perfect for a variety of hanging, strapping, making stair cable railing and DIY activities outside and inside..
  • ✔️ EXCELLENT TENSION & RELIABLE CONSTRUCTION: Our 650FT 1/8” stainless steel cable wire has a rated pulling strength of 1460lbs and a break strength of 1800lbs. Besides, this wire is constructed of 7x7 construction, 7 groups of 7 strands braided together to form the cable. It creates a strong enough core to ensure long service life..
  • ✔️ PREMIUM CABLE CUTTER AND GLOVES: We donate you the highest cut resistance level HPPE material pair of gloves and a cable cutter. This cable cutter works excellently in cutting up to 5/32” wire rope cables of all kinds. It has a safety lock preventing accidental opens and cuts that might hurt you. With a telescopic spring and lightweight design, it is beginner-friendly and portable..
Check Stock

Muzata Cable Cutter Wire Rope Heavy Duty Stainless Steel Aircraft Up to 5/32\ for Deck Stair Railing Strong Thick Seal Metal Fence Bike Bicycle Brake Cutter CR12, CT1

  • High Quality Cable Cutter - This cable cutter works excellent in cutting up to 5/32" wire rope cable of all kinds. It is widely used in industrial and home applications like cable railing, fencing, bike brakes, and other DIY projects. Recommend using with 1/8" stainless steel wire rope WR01 and hydraulic crimper CR09. Package includes: 1pcs cable cutter.
  • Clean Cut - The blade of this wire rope cutter is quite sharp and durable since the blade is made of manganese steel and has been hardened by high-frequency quenching. This steel wire cable cutter can make exact and clean cuts without fraying or smashing the cable ends.
  • Safe and Easy - The safety lock prevents accidental opens and cuts that might hurt you. The ergonomic one-hand operation and non-slip rubber grips make it work easily. With telescopic spring and lightweight design , it is beginner-friendly and portable.
  • Pre-Designed System - We pre-designed a NightScape cable railing system to help you get a fully customized project, including black cable railing kit CB05, adhesive washer CR86, stainless steel cable WR17, cable cutter CR12, socket wrench CT16, drill template CT22, black posts PM05, lighting handrail HT11, handrail connector HA20 HA21.(Please note that the package ONLY contains contents a....
Check Stock

Hakko CHP TRR-58-G Macro Soft Wire Cutter, Flush Cut, 3.0mm Hardened Carbon Steel Construction, HRC 58, 21-Degree Angled Jaw, 14mm Jaw Length, Wide Head, 10 Gauge Maximum Cutting Capacity

  • High Quality Cable Cutter - This cable cutter works excellent in cutting up to 5/32" wire rope cable of all kinds. It is widely used in industrial and home applications like cable railing, fencing, bike brakes, and other DIY projects. Recommend using with 1/8" stainless steel wire rope WR01 and hydraulic crimper CR09. Package includes: 1pcs cable cutter.
  • Clean Cut - The blade of this wire rope cutter is quite sharp and durable since the blade is made of manganese steel and has been hardened by high-frequency quenching. This steel wire cable cutter can make exact and clean cuts without fraying or smashing the cable ends.
  • Safe and Easy - The safety lock prevents accidental opens and cuts that might hurt you. The ergonomic one-hand operation and non-slip rubber grips make it work easily. With telescopic spring and lightweight design , it is beginner-friendly and portable.
  • Pre-Designed System - We pre-designed a NightScape cable railing system to help you get a fully customized project, including black cable railing kit CB05, adhesive washer CR86, stainless steel cable WR17, cable cutter CR12, socket wrench CT16, drill template CT22, black posts PM05, lighting handrail HT11, handrail connector HA20 HA21.(Please note that the package ONLY contains contents a....
Check Stock

Muzata Cable Cutter Wire Rope 2022 Upgraded Version Up to 5/32\ Heavy Duty Stainless Steel Deck Stair Railing Aircraft Strong Thick Seal Metal Fence Bike Bicycle Brake Cutter CT15, CT1

  • High Quality Cable Cutter - This cable cutter works excellent in cutting up to 5/32" wire rope cable of all kinds. It is widely used in industrial and home applications like cable railing, fencing, bike brakes, and other DIY projects. Recommend using with 1/8" stainless steel wire rope WR01 and hydraulic crimper CR09. Package includes: 1pcs cable cutter.
  • Clean Cut - The blade of this wire rope cutter is quite sharp and durable since the blade is made of Chrome Vanadium (CR-V) steel and has been hardened by high-frequency quenching. This steel wire cable cutter can make exact and clean cuts without fraying or smashing the cable ends.
  • Safe and Easy - The safety lock prevents accidental opens and cuts that might hurt you. The ergonomic one-hand operation and non-slip rubber grips make it work easily. With telescopic spring and lightweight design , it is beginner-friendly and portable.
  • Pre-Designed System - We pre-designed a NightScape cable railing system to help you get a fully customized project, including black cable railing kit CB05, protector sleeve CR67, stainless steel cable WR17, cable cutter CT15, socket wrench CT16, drill template CT22, black posts PM05, lighting handrail HT11, handrail connector HA20 HA21.(Please note that the package ONLY conta....
Check Stock

Muzata Cable Cutter Wire Rope Heavy Duty Stainless Steel Aircraft Up to 5/32 for Deck Stair Railing Strong Thick Seal Metal Fencing Bike Bicycle Brake Cutter with 6Pcs Ferrules CR12 CT1

  • High Quality Cable Cutter - This cable cutter works excellent in cutting up to 5/32" wire rope cable of all kinds. It is widely used in industrial and home applications like cable railing, fencing, bike brakes, and other DIY projects. Recommend using with 1/8" stainless steel wire rope WR01 and hydraulic crimper CR09. Package includes: 1pcs cable cutter, 6pcs ferrules.
  • Clean Cut - The blade of this wire rope cutter is quite sharp and durable since the blade is made of manganese steel and has been hardened by high-frequency quenching. This steel wire cable cutter can make exact and clean cuts without fraying or smashing the cable ends.
  • Safe and Easy - The safety lock prevents accidental opens and cuts that might hurt you. The ergonomic one-hand operation and non-slip rubber grips make it work easily. With telescopic spring and lightweight design , it is beginner-friendly and portable.
  • Pre-Designed System - We pre-designed a NightScape cable railing system to help you get a fully customized project, including black cable railing kit CB05, adhesive washer CR86, stainless steel cable WR17, cable cutter CR12, socket wrench CT16, drill template CT22, black posts PM05, lighting handrail HT11, handrail connector HA20 HA21.(Please note that the package ONLY cont....
Check Stock

Muzata Cable Cutter Wire Rope Heavy Duty Stainless Steel Aircraft Up to 5/32\ for Deck Stair Railing Strong Thick Seal Metal Fencing Bike Bicycle Brake with 6PCS M3 Cable Clip Clamp CR12

  • High Quality Cable Cutter - This cable cutter works excellent in cutting up to 5/32" wire rope cable of all kinds. It is widely used in industrial and home applications like cable railing, fencing, bike brakes, and other DIY projects. Recommend using with 1/8" stainless steel wire rope WR01 and hydraulic crimper CR09. Package includes: 1pcs cable cutter, 6pcs wire rope clips.
  • Clean Cut - The blade of this wire rope cutter is quite sharp and durable since the blade is made of manganese steel and has been hardened by high-frequency quenching. This steel wire cable cutter can make exact and clean cuts without fraying or smashing the cable ends.
  • Safe and Easy - The safety lock prevents accidental opens and cuts that might hurt you. The ergonomic one-hand operation and non-slip rubber grips make it work easily. With telescopic spring and lightweight design , it is beginner-friendly and portable.
  • Pre-Designed System - We pre-designed a NightScape cable railing system to help you get a fully customized project, including black cable railing kit CB05, adhesive washer CR86, stainless steel cable WR17, cable cutter CR12, socket wrench CT16, drill template CT22, black posts PM05, lighting handrail HT11, handrail connector HA20 HA21.(Please note that the package ON....
Check Stock

Steel DN Mate 45 30 90 Degree Angle 4 Sizes Drill Jig for Angled Holes/Straight Holes, Drill Guide for Cable Railing Lag Screw Wood Post, Durable Aluminum Alloy Drilling Jig for Deck Stair Handrail

  • ...to use and carry. We enchase the holes with steel protective sleeves, so no worry about it may crack during drilling, causing the guide holes to get broken or inaccurate..
  • Accurate 3 drilling angles: There are 3 different angles in this portable metal drill guide: 30 degree, 45 degree and 90 degree. Building a stair railing becomes much easier and more, convenient with the 30° & 45° angle holes and 90° for horizontal and vertical straight holes.A new beginner can quickly drill accurate 30/45/90 degree angle holes with a electric hand drill in the post with this tool, time-saving and perfect finish..
  • 4 different sizes of holes: This cable railing drill template guide jig offers 4 different size holes, 3/16” (4.76mm), 1/4”(6.35 mm), 5/16”(7.93mm), 3/8”(9.52mm), which are compatible with most cable railing hardware. The hole drilled by 1/4” fits most 1/8″ cable railings lag screws..
  • 4 Application: This drill guides for portable drills is widely use to  install of wooden, and metal deck railing posts for cable railings and DIY woodworking/Handrail projects. It can work with 6” woodworking F clamp and C clamp for no shaking and safer drilling..
  • This drill guide for straight holes is a part of our cable railing system, we have everything n....
Check Stock

Muzata 4Pack Cable Railing Post 42''x2''x2'' (Post Body 41'') Flat Top Level-drilled Post Stainless Steel Black Finish Top Mount Wood Concrete Level Deck, PS02 BH4L

  • Key feature – This square cable railing post (black finish) is designed for 42″ commercial cable railing projects. It is pre-drilled with 12 pairs of level holes to work on horizontal sections and save your labor. It can act as both structural end post and middle post in level sections. Muzata invisible cable railing kit series is recommended to work with this post. Plz search Muzata CV2.
  • Weather protection – This cable railing post is made of quality T304 stainless steel with great rust resistance and will work for a long lifetime. It is ideal for both indoor and outdoor applications like deck, stair, porch, balcony, and fence. However, plz note that T304 is not recommended for projects within 10 miles of the seaside or saltwater. Need posts applicable in humid conditions, please search Muzata PM05 to find the aluminum cable railing posts.
  • Code Compliance – This structural square post is designed with 3″ cable spacing. Generally, the span between two structural posts should not exceed 4 feet to pass the 4″ sphere test. But it could be increased to 7 feet if you add a stabilizer post between them. Please search Muzata PS32 to find slice stabilizer posts to get a broader view. It is important to consult local building offices about the rules....
Check Stock