Top Display Single Digit Led Reviews

MECCANIXITY LED Display Digital Tube Common Cathode 10 Pin 7 Segment Red 10Pcs 1 Digit 5Pcs 2 Digit

• These LED display digital tubes are used widely in home appliances, instruments, accessories, etc..
• Package Contents: 10Pcs x 1-Digit LED Tube, 5Pcs x 2-Digit LED Tube.
• Made of plastic material, strong and durable, light weight, good impact resistance..
• Easy to install, the center pins are the Cathode. Connect one or both center pins to ground, and each other pin is the power for the display..
• Please make sure you know how to connect before buying.

Yamaha MX88 88-Key Weighted Action Synthesizer

• The 88-note, GHS weighted action is heavier in the low keys and lighter in the high keys, just like an acoustic piano.
• Class-compliant USB audio/MIDI for true "plug and play" connectivity without installing any drivers.
• Motif sound engine: layer, zone, switch, cycle, randomize and control up to 8 elements within a single voice.
• Virtual circuitry Modeling (vcm) re-creates the sound and behavior of vintage effects and signal processors.Display 3 digit LED + 20 x 2 line character LCD (backlit).
• 128 notes of polyphony ensures dropout-free performance playing live or with full 16-track sequences.

Treedix 0.56\ 3-Digit 7-Segment Display Common Cathode 3-Digit LED Display Digital Tube Compatible with Arduino (Blue, 5pcs)

• Can be used in Arduino project and other micro-controller development boards as output indicator..

Galaxy DX-939 Backlit 40ch Mobile CB Radio with TalkBack & Roger Beep

• Star Lite faceplate makes all lettering glow in the dark.
• Large, easy-to-read meter with scales for power output, modulation, SWR and incoming signal.
• Five-digit frequency counter and two-digit channel display using large blue LEDs , variable power output control, variable talkback circuit with on/off switch.
• Automatic SWR circuit with an SWR alert LED, Roger Beep circuit with on/off switch.
• Variable dimmer control, frequency display on/off switch, 3-position tone switch for receive.

Basic 16x2 Character LCD - RGB Backlight 5V

• DRIVER IC: The module driver IC is for AIP650 (compatible for TM650), as well as supports multiple display characters..
• 4 DIGIT 7 SEGMENT: The digital tube display module is designed for 4 digit 7 segment, with stable and reliable performance..
• CONTROL INTERFACE: With 4 pins, SDA is bidirectional data line, SCL is clock line, GND is for ground line, and VCC is power supply..
• COMPACT STRUCTURE: The LED digital tube module is exquisite and compact, which can be flexibly used in a variety of situations..
• WIDE APPLICATION: This module is suitable for Raspberry Pi 3 B+ 4, for DIY electronic devices, toy cars and instrumentation etc..

(10) Rockville RockWedge LED RGBWA+UV Rechargeable Wireless DMX DJ Par Up-Lights

• ... GREEN, BLUE, WHITE, AMBER + ULTRA VIOLET). DMX control: 6 or 10 channels. DMX input and output (3 pin). 50,000 hours life expectancy. IRC wireless remote control included. Super bright: 6500 lux @1m (way brighter than others on the market).
• Large color 4-digit digital LCD display for easy color mixing & operating. Our interface is the easiest to use on the market. Easy to operate with the large LCD display, remote control, DMX controller, built in programs, and sound activated mode. Easy color mixing on one screen. LED angle: 30 degree (+ or 5). Built in 7500 mAh lithium battery. Battery indicator on LCD display so you know how much longer your battery will last. Single Color run time Red: 24 hours, Green: 22 hours.
• Double Color run time: 15 hours. All Colors run time: 12 hours. Recharge Time: 10 hours. Battery will still perform optimally even after hundreds of charging cycles. Battery overcharge protection. Power supply: AC110V-220V/50-60Hz. Power consumption: 25w. Automatic modes: color change, strobe, dimmer, gradual color change, jump change, sound activated. Flicker Free lights. Colors: 16.7 million colors. 1-year warranty. Black Housing. Create customize....

(6) Rockville RockWedge LED RGBWA+UV Rechargeable Wireless DMX DJ Par Up-Lights

• ... GREEN, BLUE, WHITE, AMBER + ULTRA VIOLET). DMX control: 6 or 10 channels. DMX input and output (3 pin). 50,000 hours life expectancy. IRC wireless remote control included. Super bright: 6500 lux @1m (way brighter than others on the market).
• Large color 4-digit digital LCD display for easy color mixing & operating. Our interface is the easiest to use on the market. Easy to operate with the large LCD display, remote control, DMX controller, built in programs, and sound activated mode. Easy color mixing on one screen. LED angle: 30 degree (+ or 5). Built in 7500 mAh lithium battery. Battery indicator on LCD display so you know how much longer your battery will last. Single Color run time Red: 24 hours, Green: 22 hours.
• Double Color run time: 15 hours. All Colors run time: 12 hours. Recharge Time: 10 hours. Battery will still perform optimally even after hundreds of charging cycles. Battery overcharge protection. Power supply: AC110V-220V/50-60Hz. Power consumption: 25w. Automatic modes: color change, strobe, dimmer, gradual color change, jump change, sound activated. Flicker Free lights. Colors: 16.7 million colors. 1-year warranty. Black Housing. Create customize....

B&K Precision 815 Hand-held Component Tester

• 3-1/2 digit extra large (0.8'' digit) high contrast LCD display.

AOICRIE 2PCS MAX7219 Dot Matrix Module for Arduino Microcontroller 4 in 1 Display with 5pin Line for Arduino for Raspberry Pi (Green)

• ★The MAX7219 also allow the user to select code B decoding or no-decode for each digit..
• ★The MAX7219 is compact, serial input/output common-cathode display drivers that interface microprocessors (µPs) to 7-segment numeric LED displays of up to 8 digits, bar-graph displays, or 64 individual LEDs..
• ★Included on-chip are a BCD code-B decoder, multiplex scan circuitry, segment and digit drivers, and an 8x8 static RAM that stores each digit..
• ★Only one external resistor is required to set the segment current for all LEDs. A convenient 3-wire serial interface connects to all common µPs. Individual digits may be addressed and updated without rewriting the entire display..
• ★The devices include a 150µA low-power shutdown mode, analog and digital brightness control, a scan limit register that allows the user to display from 1 to 8 digits, and a test mode that forces all LEDs on..

Horizon Fitness T202 Treadmill

• up to 12 miles per hour and incline up to 12 percent for a wide range of workouts.
• Running Area: 20 by 55 inches with PerfectFLEX™ PLUS cushioning.
• FeatherLIGHT™ folding lift system for easy fold-up storage.
• Two 4-digit LED display windows, alphanumeric display, LED brickyard workout profile.
• Sonic Surround™ speakers with Made for iPod compatibility (charging and control).

horinker 2pcs MAX7219CNG MAX7219 Serially Interfaced 8-Digit LED Display Drivers，24Pins.

ALAMSCN MAX7219 Dot Matrix Module 32x8 4 in 1 LED Display Modules for Arduino Raspberry Pi Microcontroller with 5Pin Wires Red (Pack of 2)

• The MAX7219 is compact, serial input/output common-cathode display drivers that interface microprocessors (µPs) to 7-segment numeric LED displays of up to 8 digits, bar-graph displays, or 64 individual LEDs..
• Included on-chip are a BCD code-B decoder, multiplex scan circuitry, segment and digit drivers, and an 8x8 static RAM that stores each digit..
• Only one external resistor is required to set the segment current for all LEDs. A convenient 3-wire serial interface connects to all common µPs. Individual digits may be addressed and updated without rewriting the entire display..
• The MAX7219 also allow the user to select code B decoding or no-decode for each digit..
• The devices include a 150µA low-power shutdown mode, analog and digital brightness control, a scan limit register that allows the user to display from 1 to 8 digits, and a test mode that forces all LEDs on..

Key Display for AVR 8-Bit Digital LED Tube 8-Bit TM1638 Module

• DRIVER IC: The module driver IC is for AIP650 (compatible for TM650), as well as supports multiple display characters..
• 4 DIGIT 7 SEGMENT: The digital tube display module is designed for 4 digit 7 segment, with stable and reliable performance..
• CONTROL INTERFACE: With 4 pins, SDA is bidirectional data line, SCL is clock line, GND is for ground line, and VCC is power supply..
• COMPACT STRUCTURE: The LED digital tube module is exquisite and compact, which can be flexibly used in a variety of situations..
• WIDE APPLICATION: This module is suitable for 3 B+ 4, for DIY electronic devices, toy cars and instrumentation etc..