Top Discharge Voltage Reviews

MakerHawk Electronic Load Tester - USB Load Tester 150W 200V 20A Resistor Adjustable Constant Current Battery Capacity Tester Module Intelligent Dischar

...age battery and large power test, access must be beforeusing two current adjustment knob counterclockwise to the minimum to zero, then the access, accordingto the priority according to current power to slowly adjust current knob, must not instantly transferred infull, so there are excessive instantaneous power load discharge tube burnt huge risk! Please use thespecial attention to this point, thank you!.
Two power supply methods: 1. DC6-12V DC5.0 power supply.
2. DC6-12V Micro USB power supply.The body discharge power cannot exceed 150W, otherwise there is a risk of burnout..
Voltage measurement range: 0.00V ~ 200V, Current measurement range: 0.00A ~ 20A..
How to operate: Set the capacity, power, time using the Keystrokes method Reset:1. Reset button Long all data (mAh, Klitschko, 00: 00: 00).
2. Fast button twice capacity reset (mAh).
4. Fast button Four time reset (00:00:00).
5. Fast button five settings auto standby, Discharge count down regularly.
6. No load output No load, fast seven key, And current zero zero current, Environmental temperature Accurate calibration..
150W power refers to: In accordance with the power calculation formula P = UI (power = voltage x current).
10V input Approximately 18A discharge c....

Check Stock

MakerHawk Electronic Load Tester USB Load Tester 150W 200V 20A Resistor Adjustable Constant Current Battery Capacity Tester Module Intelligent Discharge Resistance Power Tester

...age battery and large power test, access must be beforeusing two current adjustment knob counterclockwise to the minimum to zero, then the access, accordingto the priority according to current power to slowly adjust current knob, must not instantly transferred infull, so there are excessive instantaneous power load discharge tube burnt huge risk! Please use thespecial attention to this point, thank you!.
Two power supply methods: 1. DC6-12V DC5.0 power supply.
2. DC6-12V Micro USB power supply.The body discharge power cannot exceed 150W, otherwise there is a risk of burnout..
Voltage measurement range: 0.00V ~ 200V, Current measurement range: 0.00A ~ 20A..
How to operate: Set the capacity, power, time using the Keystrokes method Reset:1. Reset button Long all data (mAh, Klitschko, 00: 00: 00).
2. Fast button twice capacity reset (mAh).
4. Fast button Four time reset (00:00:00).
5. Fast button five settings auto standby, Discharge count down regularly.
6. No load output No load, fast seven key, And current zero zero current, Environmental temperature Accurate calibration..
150W power refers to: In accordance with the power calculation formula P = UI (power = voltage x current).
10V input Approximately 18A discharge c....

Check Stock

11.1V Lipo Battery 3S Lipo Battery 6200mah 50C Hard Case Tracxas Plug for Tracxas RC Car/ Truck/Buggy RC Boat Airplane UAV Drone 2 Packs

【WHAT YOU GET】Youme 3S 6200mah Lipo Battery 50C with Tracxas Plug [QUICKLY RECHARGED,LONG CYCLE LIFE(150times minimum),up to 293Wh/kg energy....
【SPECIFICATION】 Material: Li-polymer.
Cell Voltage:3.2V-4.2V,Capacity: 6200mAh.
【FITS AND APPLICATION】RC Battery use for Losi LST, Goblin 730 ,Goblin 570, DJI Phantom 3 standard,RC airplane, helicopter, car, truck, boat,....
【VOLTAGE NOTE】RC Lipo 3S Built-in protection mechanism ensures safe charging and use. Don't over charge more than 4.2V and don’t over discharge....
【PROFESSIONAL AND RELIABLE】3S lipo With the most advanced production technology and strict QC teams, our Lipo batteries provide steady discharge....

Check Stock

SKYRC BD250 250 Watt 35 Amp Variable Battery Discharger and Analyzer Tester for Hobby Remote Control Vehicles Digital LED Display Continuous Discharge

The BD250 is a powerful discharging device that allows the user to discharge a battery at up to 35 amps or 250 watts and also measures and compares the performance of batteries. BD200 allows for the precise measurement of battery capacity and takes the guesswork out of choosing the best battery for your application..
The BD250 is much more than a simple battery discharger or a battery load tester. It will test virtually any type or size of battery, any chemistry or number of cells, up to 35 volts..
It is small with a high performance cooling system and uses MOS fets from the well-known brand IXYS, to make sure it can discharge at 200 watts continuously..
With PC software connected, BD250 allows you to export the battery voltage value at 30 seconds intervals (for the first six minutes)..
Voltage Range: 5.40-35.00V Low Voltage Alert: 35V Max. Discharge Power: 250W Discharge Current Range: 0.01A-35.00A Current Consumption in Sleep Mode:.

Check Stock

ALLPOWERS 20A Solar Charger Controller Solar Panel Battery Intelligent Regulator with USB Port Display 12V/24V

Battery Voltage: 12V/24V auto. Adjustable power rate with dual USB ports.
3-Stage(Bulk, ABS, Float) charge management and 4-Stage PWM charge. Please notice the controller might be power off if the battery voltage is too low..
►Functionality: Equipped with industrial-grade STM 8 microprocessor to control the charger and discharge process and it has reliable battery to charge and discharge period management.
►Mutiple Electric Protection: Over-current and short-circuit protection, inverse connection protection, low voltage and overcharge protection.
►Good Heat Dissipation: Dual mosfet reverse current protection, low heat production(ALL electronic components generate heat when they are running,it is better to shelter them for better heat dissipation, avoid direct sunlight exposure or damp place).
►Easy to Use: Comes with a display that can clearly indicate the status and data, it can be conveniently switched modes and parameter configuration, suitable for home, industrial, commercial etc. Warranty only against products from ALLPOWERS. Any items ordered from other sellers, ALLPOWERS will not be responsible for the After-Sales..

Check Stock

Battery Tester Electronic Load 0.1-40A Large Current Lithium Battery Charge Discharge Capacity Tester, Time/Cut-Off Current/Manual Charge Discharge Termination

【BATTERY CAPACITY TESTER】EBC-A10H is an electronic load with charging function. It is suitable for charging and discharging capacitance test of various batteries, mobile power discharge test, charging head power performance test, support for connecting to computers, and more extended functions through online software..
【AUTOMATIC BATTERY CAPACITY TEST】Charging method is standard charging, support nickel hydrogen, nickel chromium, lithium, iron lithium, lead acid. Support automatic charging - discharge - charging mode for testing battery capacity. LCD display: voltage, current, capacity, time, power, energy test data..
【LARGE CURRENT BATTERY CHARGE DISCHARGE】This EBC-A10H battery capacity tester is designed to charge and discharge batteries within 5V at a large current, the maximum current it supports is 40A in charging and 40A in discharging. It can connect with a computer through a designated USB-TTL cable..
【TECHNICAL PARAMETERS】Power Supply: AC 110V.
Discharging Termination: Time / Cut-off Voltage / Manual.
Charging Termination: Cut-off Current / Manual.

Check Stock

HOOVO 3S 11.1V Lipo Battery 2200mAh 50C with EC3 Plug for RC Car Boat Truck Multi-Motor Heli Airplane Quadcopter Helicopter Hobby

【2200 3S Lipo High Performance】- High capacity, Long Cycle Life (150 times at least), up to 235Wh/kg energy density. More run time, more fun time..
【11.1V 3S lipo battery Specification】- Cells Number: 3.
【Parameter】- 3S Lipo Battery Dimension(±2mm): 104*34.5*24.5mm / 4.09*1.36*0.96inch (L*W*H).
【Application】- 3S 2200mah lipo battery ec3, Small size, for FPV, Quadcopter, RC airplane, Helicopter, Mini Shredder 200, Indy250 plus mojo 280, Qav250, Vortex and Emax nighthawk 250.(Only if the voltage, dimension and the plug match, then it will fit)..
【Professional and Reliable】 - HOOVO Lipo Battery with the most advanced production technology and strict QC teams, provide steady discharge curve, high discharge rate to reach the top speed with the most stability and power your RC hobbies. If you have any problem,please contact us directly, 24-hour professional customer service support before purchase and after sales..

Check Stock

30A Solar Charge Controller, Solar Panel Charge Controller 12V 24V Dual USB Charge Regulator Intelligent, Adjustable Parameter Backlight LCD Display and Timer Setting ON/Off Hours(30A)

...V system. Fully 4-Stage PWM charge (Boost, ABS, Equalization, Float), the power MOSFET is used as and electronic switch without any mechanical switches and equipped with industrial-grade STM 8 microprocessor to prolong your battery life cycle..
☀【LCD Display 】: Backlight LCD display PV/Battery/Load charge and discharge parameter. Adjustable Floating voltage/LVD/LVR/Load Timer for this charge controller according to needs.ADD Feature: Charge and Discharge Current, cumulative power generation and discharge power query.
☀【Lead-acid Batteries】: Solar Charge controller is only suitable for lead-acid batteries: OPEN, AGM, GEL, not for nickel hydride, lithium, Liions, or other batteries. For protecting the lifespan of your battery, once the voltage of the battery drop below 8V, the solar controller will turn off automatically.
☀【PWM Charge Controller Protection】:Dual MOSFET Reverse current /overheat /Under-voltage discharge discharge /short-circuit /open-circuit / over-load /over-charging protection.more safe for home, industrial, commercial etc.
☀【Easy to Install and Operate】: The charge controller should connect the battery first, then the solar panel, and finally the load! The disassembly sequence is contrary to the wiring order.(....

Check Stock

HOOVO 2S 7.4V 100C 5000mAh RC Shorty Lipo Battery Hard Case Pack with 4.0mm Bullet Deans Connector for RC 1/10 Scale Vehicles Car Trucks Truggy Boat Racing

【High Performance】- High capacity, Long Cycle Life (150 times at least), up to 235Wh/kg energy density. More run time, more fun time..
【Parameter】- 2S Lipo Battery Dimension(±2mm): 95.5*47*25mm / 3.76*1.85*0.98inch (L*W*H).
【Application】- Fits models like 1/10 Scale Vehicles, especially those in need of shorty battery dimensions. (Only if the voltage, dimension and the plug match, then it will fit)..
【Professional and Reliable】 - With the most advanced production technology and strict QC teams, our Lipo batteries provide steady discharge curve, high discharge rate to reach the top speed with the most stability and power your RC hobbies. Please let us know if you have any questions about our product, and we will reply you within 24 hours..

Check Stock

Organizer 2pcs 4S 40A Li-ion Lithium Battery 18650 Charger PCB BMS Protection Board with Balance for Drill Motor 14.8V 16.8V Lipo Cell Module

Multiple Protections: Over-discharge protection, overcurrent protection, overcharge protection.
LOW STANDBY CURRENT: MOS transistor can control the battery charge and discharge, low standby current consumption..
Applications:It is suitable for lithium batteries with nominal voltage of 3.7V and full voltage of 4.2V (including 18650, 26650, polymer lithium....
4S 40A 16.8V Li-ion Lithium Battery Protection Board PCB BMS Charger Protection Circuit Balance Charging Module for Drill Motor Motorcycle Battery.

Check Stock

HOOVO 22.2V 6S LiPo Battery 6000mAh 100C Softcase RC Battery for RC Quadcopter Truck Boat Airplane Helicopter UAV Drone FPV(2 Pack)

【High Performance】- High capacity, Long Cycle Life (150 times at least), up to 200Wh/kg energy density. More run time, more fun time..
【Parameter】- 6S Lipo Battery Dimension(±2mm):152*48.5*48mm/5.98*1.91*1.89inch(L*W*H).
【Application】-22.2V 6000mah RC Lipo Battery Suitable for RC airplane, RC helicopter, RC car, RC boat, truck, Align T-REX 550/ 700E F3C/ 700L/ 800E RC Airplane, Quadcopter, etc. (Only if the voltage, dimension and the plug match, then it will fit)..
【Professional and Reliable】 - Hoovo Lipo Battery with the most advanced production technology and strict QC teams, our Lipo batteries provide steady discharge curve, high discharge rate to reach the top speed with the most stability and power your RC hobbies. We offer 30-days Money Back Guarantee, 12 months warranty for quality-related issues. Please let us know if you have any questions about our product, and we will reply you within 24 hours..

Check Stock

HOOVO 2S 7.4V 100C 5000mAh RC Shorty Lipo Battery Hard Case Pack with 4.0mm Bullet Deans Connector for RC 1/10 Scale Vehicles Car Trucks Boat Racing (2 Pack)

【High Performance】- High capacity, Long Cycle Life (150 times at least), up to 235Wh/kg energy density. More run time, more fun time..
【Parameter】- 2S Lipo Battery Dimension(±2mm): 95.5*47*25mm / 3.76*1.85*0.98inch (L*W*H).
【Application】- Fits models like 1/10 Scale Vehicles, especially those in need of shorty battery dimensions. (Only if the voltage, dimension and the plug match, then it will fit)..
【Professional and Reliable】 - With the most advanced production technology and strict QC teams, our Lipo batteries provide steady discharge curve, high discharge rate to reach the top speed with the most stability and power your RC hobbies. Please let us know if you have any questions about our product, and we will reply you within 24 hours..

Check Stock

MakerFocus 4pcs 3.7V Lithium Rechargable Battery JST1.25 Connector 2pin, 852540 3.7V 1000mAh Battery with Protection Board and Insulated Rubber Tape Compatible with ESP32 Development Board

Note: The battery overcurrent protection is not a panacea, do not continue to charge and discharge the current and voltage with a large current beyond the range, otherwise the protection board will be damaged and invalid. When using for the first time, please charge and activate the protection board first.
1100mah: The recommended charging current is 0.2A, the maximum is not more than 1A The discharge current is recommended 0.55A, and the maximum is not more than 3A.
Over-discharge protection: When the battery is about to run out and the voltage is as low as 3.0V, the protection board will also be turned off and can no longer be discharged, forming an over-discharge protection effect..
Overcharge protection: When charging the battery, when the voltage reaches the highest battery voltage (4.2V), the protection board will automatically power off and shut down, indicating that it will not continue to charge when fully charged. form an overshoot protection..
Short circuit protection: When an accidental short circuit occurs, the protection board will automatically shut down within a few milliseconds and will not be powered on again. Note that the cell is short-circuited (not through the protection board). The protection board will also fail due to continuous ....

Check Stock