Top Din 17175 Steel Tubes Reviews

OMAX 50X-787.5X Touchpad Screen Trinocular Ore Petrographic Polarizing Microscope with Bertrand Lens

Total magnification: 50X - 125X - 312.5X - 500X - 787.5X.
Head: Trinocular, 45 degrees inclined 360 degrees rotatable, interpupillary adjustable, diopter rings on both ocular tubes.
Eyepieces: 10X (a pair of regular, and one with reticles, one with crosshair, and one with grids).
Nosepieces: Quadruple, objective center adjustable.
Objectives: DIN strain free achromatic - 4X/0.10.

Check Stock

UK5-HESI DIN Rail Fuse Holder Disconnect Terminal Blocks Screw Clamp UK5RD (Without LED indicated, Grey, 10)

✯ Category: Fuse Holder Terminal Block.
Type: UK5-HESI. Suitable for various sizes of fuse tubes, such as: 5x20, 5x25, 6x30, etc..
✯ Material: Nylon PA66 Housing, Fire retardant, Flame retardant..
✯ Installation Method: DIN Rail Mounted, universal mounting foot to easily mount onto DIN rail..
✯ Fuse terminal block for cartridge fuse inserts without indication. The lever-actuated fuse holder makes fuse insertion and extraction safe and easy..
✯ Compact Fuse holder Terminal Block used in control circuit applications..

Check Stock

Ethernet Surge Protector - PoE+ - Gigabit - (with DIN Rail Mount Option) - Gas Discharge Tube for Full Protection - RJ45 Lightning Suppressor - LAN Network CAT5/CAT6 Thunder Arrestor - Tupavco TP309

DIN Rail Ethernet Surge Protector - Gigabit GbE PoE/High PoE+ (HPoE) 1000 Mbps LAN Ethernet Network.
Gas Discharge Tubes for Full Protection GDT - Lightning Suppressor RJ45 Cable Protection CAT6/CAT5.
Standalone or DIN Mount Line-Line Line-Ground Protection,Bidirectional Clamping,5KA 8/20μs.
Thunder Arrestor Protects Computer Networking Equipment Devices like Router,Modem,Camera,Switch etc.

Check Stock

Astro Pneumatic Tool 9477 7-Piece Professional Quick Interchangeable Ratchet Crimping Tool Set

C Jaw - Open Barrel Terminals: for AWG 20-18/16-14/12-10 DIN 0.5-1.0/1.5-2.5/4-6mm², D Jaw - Insulated Cord-End Terminals (small AWG.): for AWG 22/20/18/16/14/12 DIN 0.5/0.75/1.0/1.5/2.5/4.0mm².
F Jaw - Insulated Cord-End Terminals (Huge AWG.): for AWG 10/8/6 DIN 6/10/16mm², H Jaw - Open Barrel Terminals & D-SUB, V3.5: for AWG 14/22/8 DIN 2.5-0.5/8-10mm².
Time saving tools allows faster crimping of terminals and wire. Crimper is easily operated by either left or right hand.
Ergonomically designed steel frame handles with contoured rubber grips.

Check Stock

UCTRONICS Raspberry Pi DIN Rail Mount, Compatible with Arduino, RPi 4B/3B+/3B/2B/B+, Pi Zero, Raspberry Pi Pico

A DIN option to provide a wide range of flexibility in mounting for multiple SBC devices, such as Raspberry Pi 4, 3 B/B+ and all other A, B and Zero Models, Raspberry Pi Pico, Arduino Uno/Mega 2560, BeagleBone series..
The mounting bracket is made of 1.2mm carbon steel, attaches to both the SBC and the DIN rail sturdily, multiple optional mounting holes help you mount the different boards and the DIN rail clips in both horizontal and vertical way..
Recommended for creating an array of Raspberry servers, home lab and other industrial projects, make it very professional and easy to maintain when needed..
Has no hassle to mount in the 19" rack with UCTRONICS DIN rail rack mount, please search for ASIN B09823N6FY to get it..
You'll be getting a mounting bracket, 2 DIN rail clips, and standoffs, and screws..

Check Stock

PetSafe Extreme Weather Sliding Glass Pet Door Replacement Flaps – Energy Efficient – Size Large – Compatible Extreme Weather Sliding Glass Pet Door for Dogs and Cats

REPLACEMENT FLAPS: When it’s time to replace the current flaps on your pet door, install these replacement flaps to keep rain and drafts outside where they belong.
QUICK INSTALLATION: Install your new replacement flaps in 3 easy steps.
LARGE SIZE: Replacement flaps fit your large pet door opening measuring 10 1/4 in W X 16 1/4 in H.
DOOR COMPATIBILITY: Replacement Flaps are compatible with the Extreme Weather Sliding Glass Pet Door (ZPA17-17175, ZPA17-17176).
U.S.-BASED CUSTOMER CARE: Let our pet product experts help.
we’re available Monday through Saturday to answer your questions.

Check Stock

PetSafe Extreme Weather Sliding Glass Pet Door Replacement Flaps – Energy Efficient – Size Medium – Compatible Extreme Weather Sliding Glass Pet Door for Dogs and Cats

REPLACEMENT FLAPS: When it’s time to replace the current flaps on your pet door, install these replacement flaps to keep rain and drafts outside where they belong.
QUICK INSTALLATION: Install your new replacement flaps in 3 easy steps.
MEDIUM SIZE: Replacement flaps fit your medium pet door opening measuring 8 1/4 in W X 12 1/4 in H.
DOOR COMPATIBILITY: Replacement Flaps are compatible with the Extreme Weather Sliding Glass Pet Door (ZPA17-17175, ZPA17-17176).
U.S.-BASED CUSTOMER CARE: Let our pet product experts help.
we’re available Monday through Saturday to answer your questions.

Check Stock

Marker 2019 Kingpin 13 Binding (100mm)

Kingpin Toe The PinTech design on the KingPin toe piece promotes an ergonomic rolling up the foot and the most direct possible connection to the ski. Six steel springs capture the energy optimally, up to a DIN setting of 13. Individually adjustable positioning blocks make it quick and easy to step in no matter what the conditions..
We recommend a brake width equal to or at most 15 mm wider than the ski waist width..
Kingpin Heel The revolutionary heel construction for the PinTech bindings features wide sole contact points to deliver the kind of direct, lossless power transfer more frequently seen in alpine bindings..
TV Certified to ISO/DIN 13992:2007 The Marker Kingpin is one of only a few tech touring bindings to have passed the ISO/DIN 13992 standard..

Check Stock

Electrodepot 60 Amp 4 Pole Normally Open Contactor 110-120V Coil Motor Load 40A Lighting 63A Bundle with Slotted Steel Zinc Plated DIN Rail 35 mm x 6 in – 1 Piece with 2#10 Screws

BUNDLE CONTENT: 4 ITEMS – One (1) 40A Contactor, one (1) compatible Slotted Steel Zinc Plated DIN Rail and two (2) drive stainless steel truss head....
APPLICATIONS – Lighting, motor or switching. AC-1 for resistance furnaces, incandescent lamps or electric heaters.
COIL VOLTAGE AND LOAD – Contactor IEC 400V. Coil Voltage 110/120VAC, 50/60 Hz.
Coil load Inrush 52VA, Sealed 10VA. Inductive/Motor Load: 40Amp,....
OTHER CONTACTOR DETAILS – Contactor type NO with 4 poles, power status indicator. IEC AC Rate: AC-1.
DIN RAIL – Standard mounting support for any electromechanical component, including contactors, using the DIN specifications adopted by European....

Check Stock

BreeRainz Din Rail Cutter, Double Groove Rail Cutter Tool w/Dual Scale Measuring Ruler, for 1.4 Inch Iron Aluminum Rails

【Double Groove Rail Cutter】- Featuring 2-groove design. Come with long lever handle. This double groove rail cutter can precisely cut both iron & aluminum Din rails at a time with less effort..
【Smooth Rail Incision】- Differ from band saws incision, sharp blade on the professional din rail cutter can ensure the rail incisions neat & smooth. No complex operation. Just press the handle and cut the rails straight.
【Dual Scale Measuring Ruler】- The new version of manual rail cutter has a dual scale ruler included, which allows you to quickly adjust the cutting length and easily cut rails to your desired sizes..
【Wide Cutting Range】- Various sizes of steel & Aluminum DIN rails can be cut. 20" total cutting length. You just need push the slider, set the cut length, insert the rails and get the rails you need right away..
【Practical Rail Cutting Tool】- Simple Structure w/ portable size. Manual din rail cutter provides a perfect solution for electric power, construction and completing other tedious cutting tasks..

Check Stock

NORJIN UK-2.5N DIN Rail Terminal Blocks Set, Including 20Pcs UK-2.5N 12 AWG Terminal Blocks + 4Pcs End Covers + 4Pcs End Brackets + 2Pcs Ground Blocks + 2Pcs Fixed Bridge Jumpers ＆ Aluminum Rail

【Terminal Blocks UK2.5B】Terminal Blocks UK2.5B is made of nylon PA66 housing, alloy copper bodies and nickel-plated Screws. Rated voltage: 600V, IEC 690V. Rated current: 20A, IEC 32A.Flexible (AWG): 24-12. It can connect two conductors with ease and can be used on DIN Rail 35mm, steel or aluminum. .
【8in Aluminum DIN Rail】Length : 203mm/ 8".
Height : 7.5mm/ 0.3". Thickness : 1.2mm/ 0.047". Guide rails can be used to install circuit breakers, contactors, surge protectors, modular jacks, motor soft starters, PLC, relays, terminals and other electrical appliances. .
【Ground Terminal Blocks Connectors】The grounding terminal blocks provide an easy-to-identify, convenient, neatly organized grounding bus that is mounted on the DIN rail. The protective terminal blocks has strong clamps to ensure tight fixation on DIN rails to achieve the PE function. .
【Bridge, End Stopper Bracket, End Cover】The bridge can be insert at the top clamp space of UK terminal blocks, potential distribution can be contact quickly using those bridges. End Stopper Clamps are fastened using screws or simply snapped onto the DIN rail. End Cover Usage: Connection by screw tighten.

Check Stock

Ateco Cake Decorating Set, 29 Piece, Plastic,

29 Piece Cake decorating set for professional bakers and beginner cake decorators.
Set contains: 26 decorating tubes including writing, star, leaf, rose, grass, basketweave, flower tubes and other tubes.
Also contains: 2 flower nails, a standard coupler, instructions and a plastic storage box..
Tubes and Flower Nails are made of stainless steel.
Hand wash and dry stainless steel tubes for best results.
Family run since 1905, Ateco has produced specialized professional quality baking and decorating tools for professional pastry chefs and discerning home bakers alike.

Check Stock

Ridgid 11238 Spring, Return

Super elastic, not easy to deform and it is durable.
Easy to use, suitable for all types of soft copper tubes.
Durable, excellent elasticity and not easy rust..
Suitable for curved copper tubes, aluminum tubes, thin- walled stainless steel tubes, etc..
Use high-density steel ring, it is not easy to damage the line pipe when bending.

Check Stock