Top Digital Timer Relay Reviews

Neoteck DC 12V Timer Switch 16A Digital Electronic LCD Time Relay Switch Programmable Timer with Wire Connectors Waterproof Cover

【12V Timer Switch】 This is a 12V 16A digital electronic LCD time relay switch programmable timer which can help for energy saving.
【Waterproof Cover & Wire Connectors Included】 Comes with waterproof cover, the timer switch can be waterproof and dustproof.
The wire connectors help for easy installation, you do not need to buy external terminals or solder wiring.
【16 ON/Off Settings】 Repeat programs with 16 On/Off setting and manual over-ride.
【Automatic Timing Correction】 Automatic timer error correction ± 60sec, weekly switching current dc.
【Wide Application】 Suitable for timing control of street lights, advertising lights, electric boxes, drainage pumps, water heaters, chargers, etc..

Check Stock

[2 Pack] DC 6-30V Timer Relay Programmable Delay Relay Module Cycle Timer with LCD Display / 5V Micro USB, Smart Home Controller

【Multifunction Timer Relay】Programmable delay modes to control the relay timings, widely used at smart home, industrial control, automatic irrigation, indoor ventilation, protection equipment etc..
【Load Range】Operating voltage: DC 6V - 30V, support micro USB 5V power supply. High level trigger: 3V - 24V. NO(Normally open) maximum load < AC 250V/10A, < DC 30V/10A. Timing range: 0.1s ~ 999mins (continuously adjustable)..
【Reverse Protection】Built-in a diode to provide protection against accidental reverse polarity for the circuits..
【Sleep Mode】If no operation within 5 minutes, the digital tube of the relay board will turn off automatically. Pressing any button can wake it up..
【Parameter Setting】OP(conduction time) / CL(off time) / LOP(circuit times) can be set individually, and the parameters are mutually independent. All parameters are permanently saved once set. The functions and parameters can be reviewed or changed at a later time..

Check Stock

Automotive Digital Timer Relay Board DC 12V 20A 1500W Relay Module with Dual Time Display, Timing Relay Switch ON-Off Control Support Cycle of time Time Delay for Car Vehicle (DC 12V)

❃❃ Digital cycle timer delay module with time ranging from 1 second to 999 hours, available for various application.▲▲ (Notice: no out put Voltage) If you need the E-Manual or meet any other questions, pls contact us and we will send it to you!!!.
❃❃ The time relay delay Dual display: Red readout for practical value(PV).
❃❃ Can be used in timing, delaying, cycle timing, intermittent timing, raft fishing machine, slow-down machine DIY, etc..
❃❃ This relay switch is four-terminal wiring and setting by buttons, easy and simple for everyone to use it..
❃❃ This 12V time delay relay can store the setting automatically. Please wait 6 seconds after finishing setting the data. The data set will be stored automatically after 6 seconds..

Check Stock

AC100V~250V Infinite Cycle Delay Timer Timing Switch Relay Turn On Off Module 0.5s ~ 1000min Adjustable Time Delay Switch

【Simple Operation】Timer module enters into an infinite cycle mode when power on, and stops working automatically after the setting time, easy to....
【Adjustable】Relay timer has 0.5s~1000min wide adjustable time range, you can adjust the delay time both at "RUN" time and "STOP" time.
【Practical】The repeat cycle timer module can be used to control the reciprocating stroke, or repetitive power on and off for equipment and....
【Application】The delay timer module is suitable for timer operating equipment, machine repetitive test circuit and fish tank intermittent pump.
【Product Parameter】AC100V~250V voltage, delay timing timer relay switch can be used for 100V/110V/ 120V/ 127V/220V/230V/240V power.

Check Stock

0.5S-300H 11 Pins Knob Control Delay Timer Relay H3CR-A Waterproof Time Relay 100-240VAC 100-125VDC for Automated Control Circuit

【Wide Field of Applications】: Our 11 pins knob control delay timer relay is widely applied to automated control circuit such as remote control,....
【Super Wide Adjustable Time Range】: The adjustable time range is super wide, which can last from 0.5 seconds to 300 hours. Users can adjust the....
【Wonderful Shell】: This 100-240VAC 100-125VDC knob control time relay adopts high quality plastic case, and this wonderful shell is waterproof and....
【High Precision】: Our 0.5s-300h H3CR-A waterproof time relay has stable performance, and a long service life. This delay timer relay also has high....
【Specifications】: Model: H3CR-A Rated voltage: 100-240VAC 100-125VDC Voltage tolerance: ±10% Power consumption: about 1.9VA Time range: 0.5....

Check Stock

Two Position Low V Actuator w/End Switch

Output: fan relay, alarm relay and 4-20ma current loop.
Controls: buzzer, Digital display, latching relay, relay Delay, relay minimum runtime.
Mounts on a standard 4” x 4” electrical box.
5 a spdt fan relay controls starters of exhaust fans.

Check Stock

Xentec H11 relay wiring harness for HID kit

8-Light 8000w High Power HID Master 120v~240v Grow Light Relay Controller w/120 volt Trigger Cable for Hydroponics (8-Light).
The trigger cable can be plugged into a standard 24-hour timer or environmental controller.
Maximum Lighting Wattage: 8000watt (1000 watt per outlet).
Minimum relay operations: 100,000 at full load..

Check Stock

WOWOONE 30 Types 74HCxx Series Logic IC Assortment Kit, Logic Gates, Integrated Circuits Assortment Kit, TTL, High-Speed Si-Gate CMOS IC, Low-Power

Input point X element x0-x7, DC24 input, low level valid. X0-5 is the high-speed counting input port (default: 12K,100KHZ optional)..
Output analog voltage WR3A instruction, corresponding to the value 0-4095. Intermediate relay M: M0-M3071, the power loss preservation range can be set..
The maximum speed current is 1A. External load common terminating + 24, the other end received the PLC output port Y..
Y0-Y5 is optional relay or transistor output, relay output current 5A. The transistor output DC24V, the current maximum 1A..
100Ms timer: t0-t199, accumulative power off save t184-t199.
10Ms timer: T200-T249, accumulative power off saving T246-T249.
1Ms timer: T250-T383, where T250-255 is cumulative.
16-bit counter: C0-C199, power off to save C100-199.
32-bit counter: C200-C219, power off to save C220-C234.

Check Stock

Macurco TX-12-HS White Hydrogen Sulfide H2S (Line Voltage) Fixed Gas Detector Controller Transducer with White Housing

Output: fan relay, alarm relay and 4-20ma current loop.
Controls: buzzer, Digital display, latching relay, relay Delay, relay minimum runtime.
Mounts on a standard 4” x 4” electrical box.
5 a spdt fan relay controls starters of exhaust fans.

Check Stock

Tuimiyisou Relay Module Board Switch Motor Time Adjustable Delay Relay DC 5V 6V 9V 12V Intelligent Controller Time Adjustable Delay Relay

This Relay Delay Switch is easy to use when you are familar with the operation.
Relay Board has high precision, stable and reliable performance for your daily use and satisfaction.
There are many voltage and time range of the Relay Module for your choice, both "on" time and "off" time are adjustable.
Time Adjustable Delay Relay can be widely used on timer operating equipment, machine repetitive test circuit, fish tank intermittent pump, etc.
With the Relay Module Controller, your life will be more intelligent and convenient.

Check Stock

Tuimiyisou Relay Module Board Switch Motor Time Adjustable Delay Relay DC 5V 6V 9V 12V Intelligent Controller Industrial Control Components-Module

This Relay Delay Switch is easy to use when you are familar with the operation.
With the Relay Module Controller, your life will be more intelligent and convenient.
Relay Board has high precision, stable and reliable performance for your daily use and satisfaction.
There are many voltage and time range of the Relay Module for your choice, both "on" time and "off" time are adjustable.
Time Adjustable Delay Relay can be widely used on timer operating equipment, machine repetitive test circuit, fish tank intermittent pump, etc.

Check Stock

AEDIKO 4pcs DC 5V Relay Module 2 Channel Relay Board with Optocoupler Support High or Low Level Trigger

Normally Open Interfaces Maximum Load : AC 250V/10A, DC 30V/10A.
2 Channel Relay Module 5V Comes with High-Current Relay,Trigger Current : 5mA.
5V Relay Module is 2 Channel Isolated, Each Relay Can Individually Switch On/Off by An Opto-Isolated Digital Input.
Relay Module Designed With Fault-Tolerant , Even If The Control Line Breaks, The Relay Will Not Move.
With Optical Coupling Isolation,Triggering More Reliable and Stable.
2 Channel Module Equipped With Screwed Terminal Plate and Fixed Bolt Holes,Standard Interface Can Connect With Microcontrollers and be Controlled by a Wide Range of Microcontrollers.

Check Stock

AITRIP 8 Pack 3V 1 Channel Relay Power Switch Module with Optocoupler Opto Isolation High Level Trigger for IOT ESP8266 Development Board

【30VDC 250VAC Load】 Equiped with high-current relay, AC250V 10A.
DC30V 10A, each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground..
【High Level Trigger】The relay module is triggered by high level signal, which can be input from microcontroller IO..
【 3V/3.3V power relay module】- This Relay Board provides a single relay that can be controlled by any 3V/3.3V digital input from your microcontroller IO..
【Wide Application】- These 3v relay board works well with ARM /PIC /AVR /MCU/Raspberry/CNC machine/ PS4/3.3V /NodeMCU/ ESP8266 module etc..
【Long Life】 - Fast response time less than 20ms and long lifetime up to 100,000 times snap action with diode freewheel protection..

Check Stock