Top Digital Time Relay Reviews

Two Position Low V Actuator w/End Switch

Output: fan relay, alarm relay and 4-20ma current loop.
Controls: buzzer, Digital display, latching relay, relay Delay, relay minimum runtime.
Mounts on a standard 4” x 4” electrical box.
5 a spdt fan relay controls starters of exhaust fans.

Check Stock

Timer Relay, Icstation Time Delay Switch AC 110V 120V Timer Switch Module Digital Time Cycle AC 85V-265V LED Display 0ms-999h

⏳Wide timing range: ICStation time relay delay is able to tolerate the widest timing adjusting range: 0-999S/ 0-999M/ 0-999H,it is available for various application.(Please Note: If the T1 time is second,the T2 time must be second. They can not achive T1 time is second and T2 time is minute/hour.).
⏳ Wide supply voltage range: Icstation timer relay supports AC85-265V. This device can support different work mode, If you are not clear the operation, please download the PDF user manual or Email us..
⏳Cycle Timer relay supports sleep working mode, which will turn off automatically after 10s(need to set ). It is also very easy to set parameter via 4 momentary keys..
⏳Parameter:Cycle Timer relay Support Voltage Input: AC85-265V, Maximum Power: .
⏳Application:The Digital timer delay can be used for timing, delay, cycle timing, intermittent timing occasions and so on, such as the descending machine DIY, timing switch, timing alarm control board. Kindly Tips: We have uploaded the user manual on the Amazon page at technical specification or under the IMAGE, please download it and read it before you use it..

Check Stock

Macurco TX-12-HS White Hydrogen Sulfide H2S (Line Voltage) Fixed Gas Detector Controller Transducer with White Housing

Output: fan relay, alarm relay and 4-20ma current loop.
Controls: buzzer, Digital display, latching relay, relay Delay, relay minimum runtime.
Mounts on a standard 4” x 4” electrical box.
5 a spdt fan relay controls starters of exhaust fans.

Check Stock

[2 Pack] DC 6-30V Timer Relay Programmable Delay Relay Module Cycle Timer with LCD Display / 5V Micro USB, Smart Home Controller

【Multifunction Timer Relay】Programmable delay modes to control the relay timings, widely used at smart home, industrial control, automatic irrigation, indoor ventilation, protection equipment etc..
【Load Range】Operating voltage: DC 6V - 30V, support micro USB 5V power supply. High level trigger: 3V - 24V. NO(Normally open) maximum load < AC 250V/10A, < DC 30V/10A. Timing range: 0.1s ~ 999mins (continuously adjustable)..
【Reverse Protection】Built-in a diode to provide protection against accidental reverse polarity for the circuits..
【Sleep Mode】If no operation within 5 minutes, the digital tube of the relay board will turn off automatically. Pressing any button can wake it up..
【Parameter Setting】OP(conduction time) / CL(off time) / LOP(circuit times) can be set individually, and the parameters are mutually independent. All parameters are permanently saved once set. The functions and parameters can be reviewed or changed at a later time..

Check Stock

DUNSI STC-1000 Temperature Controller Waterproof Sensor Heating Cooling LED STC1000 STC-1000 Digital Dual Relay Thermostat Incubator Aquarium 110 Volt AC 110V 2m Fahrenheit Temp Control

【HIGH QUALITY】DUNSI premium STC-1000 Digital Temperature Controller is made of high quality ABS heavy-duty and anti-flamming plastic shell material which can use for a long time.designed with compressor delay protection, it will alarm when temperature exceeds temperature limit..
【MAIN SPECIFICATION】DUNSI Digital Dual Relay Thermostat (110v) Keeps temperaure in desired range and guaranteed accuracy.Fully utilize the stc microcontroller and NTC probe to this controller has great accuracy: ±1°F, Temperature control range: -58~212°F, Power consumption: ≤3W. Power Supply: 110VAC 50Hz/60Hz. Output: 2 Relays, Cooling (10A/110-220VAC) / Heating (10A/110-220VAC)..
【OPTIMAL PERFORMANCE】DUNSI premium upgrade STC-1000 Temperature Controller has 2 Relays.Compared with other 1 relay temperature controllers, you can wire 2 appliances (heater and cooler) at the same time.No more frequently wirring change between heater and cooler. Every piece of our products is strictly inspected before sale..
【WIDE APPLICATION】DUNSI STC-1000 Dual Relay Thermostat Controller with 2m Waterproof probe can be used in moisture and water environment, you can use it in home brewing, fridge, pet breeding, reptile, tank, incubation, fermentation, seedling heat mat, acceler....

Check Stock

CENTAURUS STC-1000 Temperature Controller Waterproof Sensor Heating Cooling LED STC1000 STC-1000 Digital Dual Relay Thermostat Incubator Aquarium 110 Volt AC 110V 2m Fahrenheit Temp Control

...erature Controller has 2 Relays.Compared with other 1 relay temperature controllers, you can wire 2 appliances (heater and cooler) at the same time.No more frequently wirring change between heater and cooler. Every piece of our products is strictly inspected before sale..
【HIGH QUALITY】CENTAURUS premium STC-1000 Digital Temperature Controller is made of high quality ABS heavy-duty and anti-flamming plastic shell material which can use for a long time.designed with compressor delay protection, it will alarm when temperature exceeds temperature limit..
【MAIN SPECIFICATION】CENTAURUS Digital Dual Relay Thermostat (110v) Keeps temperaure in desired range and guaranteed accuracy.Fully utilize the stc microcontroller and NTC probe to this controller has great accuracy: ±1°F, Temperature control range: -58~212°F, Power consumption: ≤3W. Power Supply: 110VAC 50Hz/60Hz. Output: 2 Relays, Cooling (10A/110-220VAC) / Heating (10A/110-220VAC)..
【WIDE APPLICATION】CENTAURUS STC-1000 Dual Relay Thermostat Controller with 2m Waterproof probe can be used in moisture and water environment, you can use it in home brewing, fridge, pet breeding, reptile, tank, incubation, fermentation, seedling heat mat, accelerating germination.It's on/off control mode. Turn....

Check Stock

AEDIKO 4pcs DC 5V Relay Module 2 Channel Relay Board with Optocoupler Support High or Low Level Trigger

Normally Open Interfaces Maximum Load : AC 250V/10A, DC 30V/10A.
2 Channel Relay Module 5V Comes with High-Current Relay,Trigger Current : 5mA.
5V Relay Module is 2 Channel Isolated, Each Relay Can Individually Switch On/Off by An Opto-Isolated Digital Input.
Relay Module Designed With Fault-Tolerant , Even If The Control Line Breaks, The Relay Will Not Move.
With Optical Coupling Isolation,Triggering More Reliable and Stable.
2 Channel Module Equipped With Screwed Terminal Plate and Fixed Bolt Holes,Standard Interface Can Connect With Microcontrollers and be Controlled by a Wide Range of Microcontrollers.

Check Stock

Macurco TX-6-AM Ammonia NH3 Low Voltage Fixed Gas Detector Controller Transducer

Fan relay actuation: Selectable from 15 to 75 ppm Nh3.
Output: fan relay, alarm relay and 4-20ma current loop.
Controls: Digital display (0-100 ppm), buzzer, fan Delay, fan minimum runtime.
Mounts on a standard 4” x 4” electrical box.
5 a spdt fan relay controls starters of exhaust fans.

Check Stock

Edwards Signaling 7005-G5 Door Annunciator

...equipment, optional relay working mode. Has 6 alarm inputs. When the input is shorted to GND, an alarm will be triggered and an alarm message will be sent..
☆☆One relay output with call mode and the other relay output with SMS control can be easily programmed with mobile phone or PC software. SMS can be used for digital programming quickly and conveniently through SMS or on‑board quick teach button..
☆☆Support free control mode or security authorization number control mode, support custom commands, easy to understand. Optional password to keep the system in safe operation mode, support remote password operation and password change..
☆☆Applications include remote control of heating of holiday houses, lighting, engine preheaters, aircraft engine heaters, irrigation systems, well pumps, pumping stations, cabin heaters, resetting of remote servers, arming and disarming security systems, and door Access control and garage door..

Check Stock

Automotive Digital Timer Relay Board DC 12V 20A 1500W Relay Module with Dual Time Display, Timing Relay Switch ON-Off Control Support Cycle of time Time Delay for Car Vehicle (DC 12V)

❃❃ Digital cycle timer delay module with time ranging from 1 second to 999 hours, available for various application.▲▲ (Notice: no out put Voltage) If you need the E-Manual or meet any other questions, pls contact us and we will send it to you!!!.
❃❃ The time relay delay Dual display: Red readout for practical value(PV).
❃❃ Can be used in timing, delaying, cycle timing, intermittent timing, raft fishing machine, slow-down machine DIY, etc..
❃❃ This relay switch is four-terminal wiring and setting by buttons, easy and simple for everyone to use it..
❃❃ This 12V time delay relay can store the setting automatically. Please wait 6 seconds after finishing setting the data. The data set will be stored automatically after 6 seconds..

Check Stock

5v Relay Board Relay Module 1 Channel Opto-Isolated High or Low Level Trigger

【1 Channel Relay Module】- This Relay Board provides a single relay that can be controlled by any 5V digital output from your microcontroller..
【Main Specification】- Peak Load of NO Connector: AC125~250V/10A, DC28~30V/10A.
【Adopted SMD Optocoupler Isolation】- The isolation circuit prevent damages to I / O port by relay switch current..
【Wide Application】- These 5v relay board works well with ARM /PIC /AVR /MCU/Raspberry/CNC machine/ PS4 etc..
【Humanization Design On Interfaces】- All interfaces can be directly wired out through the terminals..

Check Stock

Youngneer 5v Relay Board Raspberry Arduino Relay Module 1 Channel Opto-Isolated High or Low Level Trigger

【1 Channel Relay Module】- This Relay Board provides a single relay that can be controlled by any 5V digital output from your microcontroller..
【Main Specification】- Peak Load of NO Connector: AC125~250V/10A, DC28~30V/10A.
【Adopted SMD Optocoupler Isolation】- The isolation circuit prevent damages to I / O port by relay switch current..
【Wide Application】- These 5v relay board works well with Arduino/ ARM /PIC /AVR /MCU/Raspberry/CNC machine/ PS4 etc..
【Humanization Design On Interfaces】- All interfaces can be directly wired out through the terminals..

Check Stock

Weewooday 15 Pieces 5V Relay Module 1- Channel Relay Control Boards with Optocoupler Isolation High and Low Level Trigger Expansion Board

Relay module: this relay board supports high and low level trigger and can be controlled by any 5V digital output of the microcontroller.
Parameter details: maximum load of normally open interface: AC 250v/ 10A, DC 30v/ 10A, trigger current is 5mA.
The 5v relay control board adopts SMD optocoupler isolation, which has strong driving ability and stable performance.
Practical design: with fault-tolerant design, the relay module will not operate even if the control line is disconnected.
All interfaces can be provided through directly connected terminal s since the humanized interface design, it is very convenient to use.
High compatibility: the relay module can be directly controlled by the 5V logic signal provided by the microcontroller, suitable for 8051, Raspberry Pi, PIC, DSP, ARM, AVR, MSP430, TTL logic, etc..
Wide application: this 5V relay board can be applied with Raspberry/ CNC machine/ ARM/ PIC/ AVR/ MCU/ PS4 and more.

Check Stock