Top Differential Filter Reviews

MidOpt Near-IR Bandpass Filter for Machine Vision, BP Series, Broad Bandwidth, BP850-30.5, Fits M30.5 Lens Filter Thread

  • 【Product Description】: This power line EMI filter terminal is a high performance power supply EMI filter, which uses for most digital devices (especially switching power supplies) for suppressing continuous and intermittent pulse interference.
  • 【Wonderful Features】: Our universal power wire filter terminal has good common mode and differential mode suppression characteristics, which is suitable for white household appliances with inverter and inverter for control system.
  • 【Main Effect】: The main effect of this power EMI filter terminal is to improve the stability of the equipment and prolong the service life of the equipment, so this Power line EMI filter is an ideal choice for you.
  • 【Wide Range of Applications】: Our 20A power EMI filter terminal is universal, compact. And this 115V/250V power line EMI filter is very easy to install, which is also suitable for mechanical equipment, treadmills, medical device, etc.
  • 【Stability】: The performance of our noise suppressor power EMI filter module is stable, which can effectively improve the working stability of other equipment, so users can rest assured to possess and use.
Check Stock

Rockville Krypton F1 1600w Peak / 400w RMS 4 Channel Amplifier Car Audio Amp

  • Rockville KRYPTON F1 1600w Peak / 400w Dyno-Certified RMS 4 Channel Amplifier Car Audio Amp..
  • Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc). 2 Ohm: 100 Watts x 4 Channels 003c1% THD+N. 4 Ohm: 70 Watts x 4 Channels 003c1% THD+N..
  • 4 Ohm Bridged: 200 Watts x 2 Channel. Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc). 2 Ohm: 400 Watts x 4 Channels. 4 Ohm: 280 Watts x 4 Channels. 4 Ohm Bridged: 800 Watts x 2 Channels..
  • All channels on the amp have crossovers so they can each be used for subs or full range speakers or tweeters or midrange speakers. All channels on the amplifier are bridgeable. Digital Voltage Display on Amp. Fully Adjustable 12dB / Octave Crossover with Differential Circuitry..
  • Adjustable Subsonic Filter: 15Hz -40Hz (This filter is on the HPF knob). Adjustable Low Pass Filter: 40Hz – 4KHz. Adjustable Band Pass Filter: 15 Hz - 4 kHz (use both the HPF and LPF filter). Adjustable High Pass (Subsonic) Filter: 15 Hz - 4 kHz. 2CH/4CH Input Mode Switch. 8 Volt Preamp Circuitry.
Check Stock

Marantz SACD30NSLG CD Player with Integrated with HEOS Built in(Silver Gold)

  • We believe the first step to achieving such musicality is excellent technical performance.
  • The player uniquely features both a high-tech digital-stream noise filter and a mains choke filter..
  • The M3CD uses an advanced, dual-differential DAC design that offers eight-times oversampling. This i.
  • This DAC and transport combination delivers greater accuracy, enabling you to hear more from your fa.
  • The perfect partner for the M3CD is, of course, the matching M3i integrated amplifier. You can simpl.
Check Stock

Taidacent THS4131 Fully Differential Input/Output Low Noise Amplifier Module Single Ended to Differential Single Ended Input Double Ended Output

  • Name: THS4131 Fully Differential Amplifier Size: 45mm X 34mm Supply Voltage Range: 5V Single Supply ±15V Dual Supply.
  • This module can implement single-ended to differential, single-ended input, and double-ended output. Has high performance, low noise, wide power supply voltage range and other advantages..
  • The THS413x consists of a true fully differential signal path from input to output. This design produced excellent common-mode noise suppression wells that improved total harmonic distortion..
  • Chip features High performance 150 MHz - 3 dB bandwidth (VCC = ±15V) 51V/us slew rate -100dB third harmonic distortion (250kHz) 2. Low noise 1.3 nV/vHz Input Reference Noise Differential input/cent output Balanced Output Suppresses Common Mode Noise Reduce second harmonic distortion from dry differential output.
  • Wide supply voltage range VCC-5 V Single Supply to ±15V Dual Supply ICC (SD) = 860 u A Shutdown Mode (THS4130) Chip application Single-ended to differential conversion Differential ADC Driver Differential antialiasing Differential transmitters and receivers Output Level Translator.
Check Stock

Tektronix MSO2014B Mixed Signal Oscilloscope, 100 MHz, 1 GS/s Sample Rate, 1 Length, 4 Analog Channels, 5 Year Warranty

  • Wave Inspector controls provide easy navigation and automated search of waveform data.
  • Filter variable low-pass filter allows for removal of unwanted signal noise while still capturing high-frequency events.
  • TekVPI probe interface supports active, differential, and current probes for automatic scaling and units.
  • 17 in. (180 mm) wide-screen TFT-LCD color display.
  • Small footprint and lightweight - only 5. 3 in. (134 mm) deep and 7 lb. 14 oz. (3. 6 kg).
Check Stock

filterSHIELD 10 PSI Differential Pressure Gauge for Filter Status

  • Has Re-settable Max Indicating Pointer for Daily Max Reading.
  • Three Color Arc Provides Great Filter Status Visual Feedback.
  • Anodized Aluminum with Buna Seals, Rated to 3,000 PSI.
Check Stock

Taidacent AD8130 Differential Receiver Amplifier Module Differential to Single-ended High Common-mode Rejection Ratio Low Noise Low Distortion

  • Name: AD8130 Differential Amplifier Size: 43mm X 38mm Supply voltage range: ±5V~±12V.
  • The differential-to-single-ended amplifier, which has a 270-MHz bandwidth and a very high common-mode rejection ratio (CMRR) at high frequencies, can also be effectively used as a high-speed instrumentation amplifier or to convert a differential signal to a single-ended signal..
  • Differential amplifiers can process single-ended inputs as interactive differential outputs or treat differential inputs as differential outputs. These amplifiers have two independent feedback loops that control the differential and common-film output voltages, respectively..
  • Chip features 1. High speed AD8130: 270 MHz, 1090 V/us (G= +1) AD8129: 200 MHz, 1060 V/us (G= +10) 2. High Common Mode Rejection Ratio (CMRR) 94 dB (minimum, DCE100 kHz) 80 dB (minimum, 2 MHz) 70 dB (10 MHz) 3. High input impedance: 1 MQ differential 4. Low noise AD8130: 12.5 nV/Hz AD8129: 4.5 nV/vHz.
  • 5. Input common mode range: ±10.5V 6 low distortion, 1V peak-to-peak (5 MHz): AD8130, -79 dBc (Worst Harmonic, 5 MHz AD8129, -74 dBc (Worst Harmonic, 5 MHz) 7. User adjustable gain G= +1 without external components 8. Supply Voltage Range: +4.5V to ±12.6V 9. Power saving mode.
Check Stock

Braeburn 2000NC Value 5-2 Day Programmable 1H / 1C

  • 5-2 day separate weekday/weekend programming, bright blue display backlight.
  • Adjustable temperature limits, hardwire or battery powered, permanent memory retains settings, filter check monitor.
  • Adjustable temperature differential, adaptive recovery mode (arm ), separate O & B terminals.
  • Meets energy aware guidelines*, ESD guard electronic circuitry, low battery indication,compressor short cycle protection.
  • Temporary program override, programmable extended hold mode, front access reset button, F˚/C˚ switch, gas/electric Fan switch.
Check Stock

Membrane Solutions 50 Micron Sediment Water Filter Replacement Polypropylene Cartridge 10"x 2.5" for Whole House RO System, Compatible with Aqua-Pure AP110, GE FXUSC,WHKF-GD05,Culligan P5-6 Pack

  • STANDARD DIMENSION – 10 inches x 2.5 inches 50 micron polypropylene sediment filter cartridge. Compatible with a wide rage of industrial filter housings and the whole house filter housings – 6 Pack..
  • FUNCTION – Remove 99% rust, silt, sand, iron and other undissolved particles in dirty water. As the first line of defense in the filtration system, protect your water using appliances and plumbing for cleaner water, improve water quality..
  • NSF CERTIFICATION – Compare to string wound filter, this filter using unique hot melt technology, no fibers falling, avoid second pollution to liquid..
  • LIFETIME – For better water quality, recommended replace TWO or THREE times a year, depending on the quality of the original water source and application type. Recommended change out differential pressure is 30psi(2.1bar)..
  • MULTI-LAYER STRUCTURE – Three separate gradient density layers enhance cartridge performance, higher dirt-holding capacity than the similar sized sediment water filter..
Check Stock

Membrane Solutions 20 Micron Sediment Water Filter Replacement Polypropylene Cartridge 10"x 2.5" for Whole House RO System, Compatible with Aqua-Pure AP110, GE FXUSC,WHKF-GD05,Culligan P5-6 Pack

  • STANDARD DIMENSION – 10 inches x 2.5 inches 20 micron polypropylene sediment filter cartridge. Compatible with a wide rage of industrial filter housings and the whole house filter housings – 6 Pack..
  • FUNCTION – Remove 99% rust, silt, sand, iron and other undissolved particles in dirty water. As the first line of defense in the filtration system, protect your water using appliances and plumbing for cleaner water, improve water quality..
  • NSF CERTIFICATION – Compare to string wound filter, this filter using unique hot melt technology, no fibers falling, avoid second pollution to liquid..
  • LIFETIME – For better water quality, recommended replace TWO or THREE times a year, depending on the quality of the original water source and application type. Recommended change out differential pressure is 30psi(2.1bar)..
  • MULTI-LAYER STRUCTURE – Three separate gradient density layers enhance cartridge performance, higher dirt-holding capacity than the similar sized sediment water filter..
Check Stock

Rockville Krypton F5 3200w Peak / 800w RMS 5 Channel Car Amplifier w Volt Meter , Black

  • Rockville Krypton F5 3200w Peak / 800w Dyno-Certified RMS 5 Channel Car Amplifier w Volt Meter..
  • Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc). 2 Ohm / 1 Ohm: 80 Watts x 4 @ 2 ohm + 500 Watts x 1 @ 1 Ohm. 2 Ohm: 80 Watts x 4 @ 2 ohm + 320 Watts x 1 @ 2 ohm..
  • 4 Ohm / 1 Ohm: 50 Watts x 4 + 500 Watts x 1 @ 1 ohm. 3,200 watts Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc)..
  • Digital Voltage Display on Amp (Accurate within 0.15V). Metal remote bass knob with clipping indicator. Channels 1-4 are Class “AB” and Channel 5 is class “D”..
  • Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. Low Pass Filter: (CH3-CH4) 40Hz –4KHz / (CH5)50Hz –250Hz. High Pass Filter: 15Hz – 4KHz. Subsonic Filter: 15Hz - 50Hz. High-Speed MOSFET Power Supply.
Check Stock

PIONEER 5CH AMP/100X4+600W/BASSBOOST REM

  • Rockville RXD-M0 1200 Watt / 600 Watt RMS Mono Class D 1 Ohm Car Stereo Amplifier with Optical Coupler Technology. CEA Compliant Power Ratings : (Rated at less than 1 % distortion).
  • 1 Ohm : 1200 Watts x 1 Channel . 2 Ohm : 800 Watts x 1 Channel. 4 Ohm : 600 Watts x 1 Channel. High-Speed MOSFET Power Supply. Optical Coupler Class “D” Technology. Studio-Grade Bipolar Output Stage Transistors ..
  • Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. Low Pass Filter : 50Hz - 250Hz. Subsonic Filter : 15Hz - 55Hz. Phase Control Switch. Full IC-Controlled Protection Circuitry. Remote Dashboard Subwoofer Control..
  • 8 Volt Preamp Circuitry. Status Mode LED Indicator. Minimum THD at Rated Power : < 0.05%. S / N Ratio : >100dB. Frequency Response : 10Hz - 500KHz. Damping Factor : > 200 @ 100Hz. 50 Amp Maxi Fuse. Dimensions : (W x H x L) 8.5" x 1.8" x 12.5"..
Check Stock

JL Audio XD1000/1v2 Monoblock Class D 1000W Subwoofer Amplifier

  • 600 watts RMS x 1 at 4 ohms (1000 watts RMS x 1 at 2 ohms) variable low-pass filter (50-500 Hz, 12 or 24dB/octave) switchable subsonic filter (30 Hz, 24 dB/oct).
  • Class D amplifier design with NextD switching amp technology differential-balanced inputs eliminate noise coming from your vehicle's electrical system Advanced Rollback Protection System prevents thermal shut-down speaker- and preamp-level inputs (speaker-level input requires an.
  • preamp outputs auto turn-on via DC offset or signal sensing 4-gauge power and ground leads and a 80-amp fuse recommended — wiring and hardware not included with amplifier.
  • no onboard fuses — when installing multiple amps in a system, an additional 80-amp in-line fuse between the distribution block and the amplifier is recommended 14-3/4"W x 2"H x 7-1/8"D.
Check Stock