Top Die Holder Set Reviews

A-Zoom .300 AAC Blackout Rifle Snap Cap

  • 300 AAC Blackout Very Limited Production 3-Die Set.
  • Includes Full Length Sizing Die, Easy Adjust Dead Length Bullet Seating Die, Factory Crimp Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data.
Check Stock

Muzerdo 110PCS Standard Sae and Metric Bearing Steel Tap and Die Rethreading Kit

  • ...uilt-in handle for easy transportation, safe storage, and quick organization.
  • Each compartment is labeled with sizing for simple identification.
  • PACKAGE CONTENTS: Combination set contains both metric taps and dies.
  • Tap die set metric tap die metal threader package includes 35 taper taps, 35 plug taps, 35 dies, 2 tap holder wrenches, 2 die holder wrenches, 1 T-bar type tap wrench, and 1 carrying case.
  • (Thread pitch gauge not included, but we recommend using these taps to light up threads from the bolt).
Check Stock

LATHE TAILSTOCK TAP & DIE HOLDER SLIDING TYPE SET IN MT2 SHANK

  • LATHE TAILSTOCK TAP & DIE HOLDER SLIDING TYPE SET IN MT2 SHANK.
  • Made of High Quality Tool Steel , this is a high quality product for your lathe machine * Used for threading and tapping purpose on the lathe machine.
  • Die Holder Sizes 13/16", 1" & 1-1/2" . * Tapping Capacity of the Tap Wrench : 1/16" to 1/4" & 1/4" to 1/2".
  • Comes in precisely ground MT2 Shank, that goes inside your lathe tailstock & intended job for threading / tapping is hold in rotating chuck. * The Die....
  • The internal bore threading/ tapping is done by mounting the tap wrench head as per tap size between the above advised range is moved toward the....
Check Stock

MASTERCOOL 72475-PRC Universal Hydraulic Flaring Tool Set with Tube Cutter Blue and Silver

  • Tube and die set stabilizing arm for easy tube forming.
  • Magnetic adapter holder keeps adapters in place.
  • Equipped with an enlarged die set compression area for better grip of dies.
  • This tool can be used on "annealed steel" & "dead soft".
Check Stock

Machine Tap 1/2\-13 UNC Thread Pitch 4 Flutes, High Speed Steel Thread Forming Tap, Uncoated (Bright) Finish, Round Shank with Square End, Plug Chamfer, HSS Machine Screw Plug Tap

  • ...uilt-in handle for easy transportation, safe storage, and quick organization.
  • Each compartment is labeled with sizing for simple identification.
  • PACKAGE CONTENTS: Combination set contains both metric taps and dies.
  • Tap die set metric tap die metal threader package includes 35 taper taps, 35 plug taps, 35 dies, 2 tap holder wrenches, 2 die holder wrenches, 1 T-bar type tap wrench, and 1 carrying case.
  • (Thread pitch gauge not included, but we recommend using these taps to light up threads from the bolt).
Check Stock

MASTERCOOL 72480 Blue & Silver 37 Degree Flaring/Double Flaring Hydraulic Tool Kit

  • TUBE AND DIE SET STABILIZING ARM for easy tube forming.
  • MAGNETIC ADAPTER holder keeps adapters in place.
  • EQUIPPED WITH AN ENGLARGED DIE SET COMPRESSION AREA for better grip of dies.
  • THIS TOOL CAN BE USED ON "annealed steel" & "dead soft".
  • INCLUDES 3/16, 1/4, 5/16, 3/8 and 1/2" dies 3/16, 1/4, 5/16, 3/8 and 1/2" double flare adapters and 37˚ cone packaged in a blow molded case.
Check Stock

Snap Pliers for Metal Snaps, Heavy Duty Snap Fastener Tool Kit with 3 Dies& 60-Set Stainless Steel 15mm Snaps, for Boat Cover/Tarp/Marine Canvas/Leather Snaps Installation/Replacement-by MinliGUY

  • Magnetic Design, Adjustable Plier- This snap fasteners kit features a magnetic die holder that can avoid falling off when snapping.Suitable for snaps installing on boat cover/tarp/marine canvas/furniture/leather/clothing/other fabric, etc.
  • Process for Quench Hardening- Heavy duty snap setter tool kit, also with surface plating, which to keep this snap fastener tool anti-corrosion, rust-proof, sturdy and durable.
  • Precise Welding, Die Holder Correct Alignment- Highly calibrated and adjustable parts to ensure the jaws are accurately and fully closed, the plier system gives you better leverage to finish snaps installation.
  • Tighter Snap, Not Easy to Fall Off- No additional tools, this upgrade snap fasteners kit makes better use of dies and snap tools to securely fasten snaps together, not easy to drop or loosen.
  • For Daily Use Snap Kit- Coming in a carrying bag, 1 snap button fastener+3 dies+30-set screw snap buttons+30-set 15mm snap buttons with a storage box+1 crochet for punch die+1 tweezer.
Check Stock

AnNafi® MT3 Shank Threading & Tapping attachment-lathe tailstock die holder set | Machine Tools | Lathe Parts & Tool

  • ★✔️ AnNafi’s THREADING &TAPPING ATTACHMENT- LATHE TAILSTOCK DIE HOLDER SET -: Made of High Quality Tool Steel , this is a high quality product....
  • ★✔️ SIZE &CAPACITY -: Die Holder Sizes 13/16", 1" & 1-1/2”. 2 Tap Chucks Holding Capacity: 0 to 1/4" & 1/4" to 1/2".
  • ★✔️ CONTENT -: This comes along with 3 Allen Keys, Tailstock Arbor with #3 Morse Taper. Does not include dies and taps..
  • ★✔️ USES -: Used for threading and tapping purpose on the lathe machine. Comes in precisely ground MT3 Shank, that goes inside your lathe....
  • ★✔️ SATISFACTION GUARANTEED:- We provide 30 Days full Money Back Guarantee if there is any Manufacturing Defect. So Buy with Confidence..
Check Stock

Utoolmart Hex Rethreading Die, UNC 8-32 Carbon Steel Thread Die, Hex Rethreading Die Machine Thread Die, Hexagon Taper Pipe, 2 Pcs

  • Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction.
  • Hex die is for dressing over bruised or rusty threads.
  • No special holder is required for this type of die, any wrench large enough will suffice.
  • Ideal for maintenance in the shop or field.
  • Included Components: 6 Piece Hex Pipe Dies.
Check Stock

DZNTOOLS Rivet Dies Eyelets Grommets Molds Snap Dies Prong Set Popper Fastener Hand Press Machine

  • Rivet Dies Eyelets Grommets Molds Snap Dies Prong Set Popper Fastener Hand Press Machine.
  • 1 piece of Hand Press Machine 1 set of Snap Die 10 mm 1 set of Snap Die 12.5 mm 1 set of Snap Die 15 mm 1 set of Rivet Die 5 mm 1 set of Rivet Die 6 mm 1 set of Rivet Die 7 mm 1 set of Rivet Die 9 mm 1 set of Rivet Die 11 mm 1 set of Eyelet Die 4.5 mm 1 set of Eyelet Die 5.4 mm 1 set of Eyelet Die 6 mm 1 set of Eyelet Die 7.5 mm 1 set of Eyelet Die 9 mm 1 piece 2mm Hole Puncher 1 piece 4mm Hole Puncher 1 piece Brass Base for a hole cutter.
  • Suitable for leather, fabrics, jeans, costumes etc..
Check Stock

Zfyoung 8" Professional Pruning Shears, Bypass Pruners, Pruning Scissors, Garden Shears, Garden Scissors, Gardening Shears, Garden Clippers, Garden Shears Pruning, Garden Supplies, Garden Tools

  • .... A must-have for the reloading enthusiast.
  • Strong Angled Frame – The Lock-N-Load Classic has a high strength, uniquely angled alloy machine frame delivers both dependability and precision. Also offers greater visibility and easier access to the cartridge.
  • Quick and Easy – Designed to assure perfect die and shell holder alignment, its Lock-N-Load quick change bushing system also makes the process quick and easy. Switch from one die to another in a matter of seconds. Quickly remove and re-install without the need to readjust the die or keep a separate seater die for each of your pet loads.
  • Easy Grip Handle – The large, ball-style handle reduces fatigue. The long handle increases leverage and reduce effort. The Power-Pac linkage and solid steel arm multiplies the leverage you apply to the handle, making is easier to size cases and reduces fatigue.
  • How to Use – Simply set the die and tighten the Sure-Loc ring on the Lock-N-Load bushing. Quickly remove and re-install without the need to readjust the die or keep a separate seater die for each of your pet loads. Dies, bushings, and shellholders sold separately..
Check Stock

Die Hard 1-5 Legacy Collection [Blu-ray]

  • Die Hard Legacy Collection (5 Films) - 5-Disc Box Set ( Die Hard / Die Hard 2: Die Harder / Die Hard.
  • Die Hard Legacy Collection (5 Films) - 5-Disc Box Set.
  • Die Hard / Die Hard 2: Die Harder / Die Hard: With a Vengeance (Die Hard 3) / Live Free or Die Hard.
  • Die Hard / Die Hard Two / Die Hard Three / Die Hard Four / Die Hard Five.
  • Bruce Willis, Alan Rickman, Franco Nero (Actors).
  • John McTiernan (Director) - Die Hard Legacy Collection (5 Films) - 5-Disc Box Set ( Die Hard / Die Hard 2: Die Harder / Die Hard (Producer).
Check Stock

86 Piece Metric and SAE Standard Tap and Die Bearing Steel Tools Set, Titanium Coated with Metal Carrying Case Amazing Tour

  • ➤ [Fit for]:SAE Tap and Die Set Perfect to create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel, Metric Tap and Die Set, Ideal for rethreading fasteners and fastener holes for auto and machinery repair. Perfect set for the professional craftsman..
  • ➤[ Performance]: 40 Piece Tap and Die Set, All cutting teeth are precisely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance,Tapered coarse and fine taps and dies start threading more easily and smoothly, and prevent overthreading.Tap and die set,is designed to thread cutting: tap is used to process internal thread,while the die is for external thread..
  • ➤[Materia]: 40-Piece SAE tap and die set, Use Industrial grade GCr15 bearing steel construction, ensures durability and tool longevity, Can complete any work with confidence.SAE tap and die set Other Names: 40-Piece SAE tap and die set, SAE tap and die set 40 piece, 7559 Tap and Die Set, Essential Threading Tool, tap and die set SAE and standard, best choice 40 piece tap and die set, tap and die set SAE and standard craftsman.
  • ➤[Package include]: 17xTaps for Internal Threads.
Check Stock