Top Die Capacity Reviews

Threading & Tapping attachment-lathe tailstock die holder set MT3

Made of High Quality Tool Steel , this is a high quality product for your lathe machine.
Used for threading and tapping purpose on the lathe machine.
Die Holder Sizes 13/16", 1" & 1-1/2" . Tapping Capacity of the Tap Wrench : 1/16" to 1/4" & 1/4" to 1/2".
Comes in precisely ground MT3 Shank, that goes inisde your lathe tailstock & intended job for threading / tapping is hold in rotating chuck..
The Die for threading purpose is hold in the various Die holder sizes. The internal bore threading/ tapping is done by mounting the tap wrench head as....

Check Stock

Threading & Tapping attachment-lathe tailstock die holder set Machine Tools MT2

Made of High Quality Tool Steel , this is a high quality product for your lathe machine.
Used for threading and tapping purpose on the lathe machine.
Die Holder Sizes 13/16", 1" & 1-1/2" . Tapping Capacity of the Tap Wrench : 1/16" to 1/4" & 1/4" to 1/2".
The Die for threading purpose is hold in the various Die holder sizes. The internal bore threading/ tapping is done by mounting the tap wrench head as....
Comes in precisely ground MT2 Shank, , that goes inisde your lathe tailstock & intended job for threading / tapping is hold in rotating chuck..

Check Stock

LATHE TAILSTOCK TAP & DIE HOLDER SLIDING TYPE SET IN MT2 SHANK

LATHE TAILSTOCK TAP & DIE HOLDER SLIDING TYPE SET IN MT2 SHANK.
Made of High Quality Tool Steel , this is a high quality product for your lathe machine * Used for threading and tapping purpose on the lathe machine.
Die Holder Sizes 13/16", 1" & 1-1/2" . * Tapping Capacity of the Tap Wrench : 1/16" to 1/4" & 1/4" to 1/2".
Comes in precisely ground MT2 Shank, that goes inside your lathe tailstock & intended job for threading / tapping is hold in rotating chuck. * The Die....
The internal bore threading/ tapping is done by mounting the tap wrench head as per tap size between the above advised range is moved toward the....

Check Stock

Greenlee 7304 Knockout Punch Driver Kit

Set contains 4 punch and die sets, and high impact plastic case.
Use with battery-powered, hydraulic, ratchet or manual drivers.
Properly assembled through pilot holes, they will make clean, fast and accurate holes.

Check Stock

Hornady .338 Lapua Rifle Die Set, Red

Features Hornady's patented Sure-Loc rings.

Check Stock

DEWALT Die Grinder with No Lock-On, Brushless, Variable Speed, Paddle Switch, 2-Inch (DWE4997NVS)

Brushless motor for long motor life and no brush changes for the die grinder.
The electric die grinder features no-load speed of 7500 to 25000 RPM for speed range during all types of applications.
Spindle lock button of the DEWALT die grinder is made for quick accessory change.
Precision 1/4-inch collet with 1/8-inch reducing sleeve for gripping strength, allowing user to operate both 1/4-inch and 1/8-inch shaft accessories.
AC/DC capacity works off welding machines and generators for productivity and versatility.

Check Stock

AnNafi® MT3 Shank Threading & Tapping attachment-lathe tailstock die holder set | Machine Tools | Lathe Parts & Tool

★✔️ AnNafi’s THREADING &TAPPING ATTACHMENT- LATHE TAILSTOCK DIE HOLDER SET -: Made of High Quality Tool Steel , this is a high quality product....
★✔️ SIZE &CAPACITY -: Die Holder Sizes 13/16", 1" & 1-1/2”. 2 Tap Chucks Holding Capacity: 0 to 1/4" & 1/4" to 1/2".
★✔️ CONTENT -: This comes along with 3 Allen Keys, Tailstock Arbor with #3 Morse Taper. Does not include dies and taps..
★✔️ USES -: Used for threading and tapping purpose on the lathe machine. Comes in precisely ground MT3 Shank, that goes inside your lathe....
★✔️ SATISFACTION GUARANTEED:- We provide 30 Days full Money Back Guarantee if there is any Manufacturing Defect. So Buy with Confidence..

Check Stock

Jaws

PROTECTIVE - Heavy duty nylon fabric keeps your die cut machine away from dust, liquids and scratches. Inner bottom part was inserted with foam and wooden board for reducing the risk of bumping and bracing the frame of the wheels..
LARGE CAPACITY - Main compartment with adhesive straps to keep your machine in place. Specially enlarged space roomy enough to hold Long Vinyl Sheet Rolls..
KEEP ORGANZIED - Top compartment with elastic pouch and adhesive straps for long vinyl sheet rolls(up to 24”). 2 zipper pockets and 14 elastic loops for storing craft pens, tools or other supplies. Extra 2 pockets at front for other accessories or personal items..
EASY TO CARRY - Features wrap around top handle and telescoping handle with wheels(up to 41.7”). It’s convenient to carry, transport and storage your die-cut machine from room to room or traveling on flights..
DIMENSIONS - Bag Size 23.2 x 11.8 x 9.4 inches. This die-cut machine storage bag is compatible with Cricut Explore Air 2, Cricut Explore Air, Cricut Maker, Maker 3, Silhouette Cameo 3 and Cameo 4. (BAG ONLY, ACCESSORIES NOT INCLUDED.).

Check Stock

Lighthouse quality tools - M14X1 LH HSS Adjustable Round Threading Die

Fits RIDGID NPT universal machine die heads 504A, 711, 713, 811A, 815A, 816, 817 and 842.
High-Speed threading die for stainless steel.
Threading dies have capacity of 1/2-inch to 3/4-inch.
Right-Hand, NPT (National {American} Pipe Tapered) thread.
RIDGID 47765 NPT dies have 14 TPI (Threads Per Inch).

Check Stock

The Rolling Stones: Unzipped

PROTECTIVE - Heavy duty nylon fabric keeps your die cut machine away from dust, liquids and scratches. Inner bottom part was inserted with foam and wooden board for reducing the risk of bumping and bracing the frame of the wheels..
LARGE CAPACITY - Main compartment with adhesive straps to keep your machine in place. Specially enlarged space roomy enough to hold Long Vinyl Sheet Rolls..
KEEP ORGANZIED - Top compartment with elastic pouch and adhesive straps for long vinyl sheet rolls(up to 24”). 2 zipper pockets and 14 elastic loops for storing craft pens, tools or other supplies. Extra 2 pockets at front for other accessories or personal items..
EASY TO CARRY - Features wrap around top handle and telescoping handle with wheels(up to 41.7”). It’s convenient to carry, transport and storage your die-cut machine from room to room or traveling on flights..
DIMENSIONS - Bag Size 23.2 x 11.8 x 9.4 inches. This die-cut machine storage bag is compatible with Cricut Explore Air 2, Cricut Explore Air, Cricut Maker, Maker 3, Silhouette Cameo 3 and Cameo 4. (BAG ONLY, ACCESSORIES NOT INCLUDED.).

Check Stock

Steel Dragon Tools® 7991 1/2\- 1\ Power Pipe Threader Threading Machine and Self Oiling Die Head

Includes replacement brush set, oiling can, and mounting tools..
Die Head: 1/2-inch to 1-inch quick-opening self oiling die head..
Dies: 1/2-inch to 3/4-inch and 1-inch RH dies..

Check Stock

Senmit 10 Ton Hydraulic Cable Crimper Hand Tool for 1/8, 3/16 Stainless Steel Cable Railing Fittings, Heavy Duty Head, Come with 8 Pairs Dies and Cable Cutter

...】: This cable crimper includes everything you need for a smooth and user-friendly experience: hydraulic crimper, Cable Cutter, 8 dies (Comes with crimping dies for 12 AWG, 10 AWG, 9 AWG, 6 AWG, 4 AWG, 2 AWG, 1 AWG and 2/0 AWG) and a portable, heavy-duty storage case..
【CAPACITY】: This industrial lug crimper has a true 10 US ton capacity, being designed for 1/8 (6 mm Die) 3/16 (10 mm Die) stainless steel cable railing and aluminum or copper wire, providing perfect crimp terminations with every use..
【HEAVY DUTY DURABLE CONSTRUCTION】: The head of crimper is made of durable steel with stainless steel coating, strength and good toughness. The Oxide Crimp Head and Dies won't chip or flake. Dies are made of more hardened 40cr steel, this cable crimper is much better than classic chrome-plated models, for an enhanced performance..
【WIDE APPLICATIONS】: Whether for battery and welding cable, building wiring, crimp heavy cast terminal lugs, this premium quality hydraulic cable crimper will do an outstanding job..
【EASY TO USE】: 4 steps to perfect crimping: install the ....

Check Stock

A Farewell To Arms (1932) (Dual Format Edition) [DVD]

PROTECTIVE - Heavy duty nylon fabric keeps your die cut machine away from dust, liquids and scratches. Inner bottom part was inserted with foam and wooden board for reducing the risk of bumping and bracing the frame of the wheels..
LARGE CAPACITY - Main compartment with adhesive straps to keep your machine in place. Specially enlarged space roomy enough to hold Long Vinyl Sheet Rolls..
KEEP ORGANZIED - Top compartment with elastic pouch and adhesive straps for long vinyl sheet rolls(up to 24”). 2 zipper pockets and 14 elastic loops for storing craft pens, tools or other supplies. Extra 2 pockets at front for other accessories or personal items..
EASY TO CARRY - Features wrap around top handle and telescoping handle with wheels(up to 41.7”). It’s convenient to carry, transport and storage your die-cut machine from room to room or traveling on flights..
DIMENSIONS - Bag Size 23.2 x 11.8 x 9.4 inches. This die-cut machine storage bag is compatible with Cricut Explore Air 2, Cricut Explore Air, Cricut Maker, Maker 3, Silhouette Cameo 3 and Cameo 4. (BAG ONLY, ACCESSORIES NOT INCLUDED.).

Check Stock