Top Diamond Tipped Reviews

IRWIN Tools Polycrystalline Diamond-Tipped Fiber Cement Circular Saw Blade, 7 1/4-inch, 4-Tooth (4935473)

  • Polycrystalline, diamond-tipped teeth provide longer circular saw blade life.
  • Circular saw blades last up to 15x longer compared to standard carbide-fiber cement blades.
  • Circular saw blade creates less dust compared to a standard carbide-fiber cement blade.
  • Cuts up to 9,000' or 5 stacks of fiber cement.
Check Stock

Diamond Tile Drill Bits Ceramic Diamond Glass Drill Bit Set 5 Pack 2 Carbide Drill Bits Ceramic Tile Drill Bits 3 Porcelain Granite Drill Bits and Drill Guide for Diamond Tip Drill Bit for Bottles

  • Tungsten Carbide Drill Bit For Ceramic Tile Bits For Drill Holes In Clay Plant Pots For Drainage 3/16″ And 1/4″ Ceramic Drill Bits For Tile . Tungsten Carbide Drill Bits have Self Centering Point for Drilling Holes in Ceramic Tile Marble Travertine and Slate..
  • Diamond Drill Bits For Glass 3/16 In 1/4″ In 1/2 Inch Drill Bit For Glass Drill Set. glass Drill Bit For Bottles Half Inch Glass Drill Bit With Guide For Drilling Hole In Glass Bottles And Glass Blocks For Tree Lights. Keep These Glass Hole Saw Drill Bit For Drilling Glass Cool With Water For Extended Life..
  • For Best Results Use The Diamond Drill Bit For Porcelain And The Spear Point Ceramic Tile Bit To Drill Tile. Use Diamond Bit To Drill Glass And Carbide Tipped Drill Bits With Any Battery or Electric Drill Hole Cutter Bits Must Be Used Wet. Carbide Ceramic Tile Drill Bit Set Can Be Used Dry If No Heat Builds Up..
  • Whilst The Tungsten Tile Cutting Drill Bits Can Be Used As Porcelain Tile Drill Bit The Diamond Tile Drill Bit Will Drill Holes In Porcelain Tile Faster And Last Longer As Long As Diamond Cutting Tip Is Kept Cool. Remove Diamond Tipped Drill Bit From Tile Hole Every 10 To 15 Seconds And Dip Diamond Porcelain Drill Bit Into Cup Of Water, Also Spray Water Into Ceramic Tile Hole To ....
Check Stock

Diablo by Freud D0704DH 7-1/4\x4T PCD Tip TCG Hardie Fiber Cement Saw Bld,5/8 Arbor, Multicolor

  • The only approved James Hardie polycrystalline diamond (PCD) tipped fiber cement saw blade.
  • The PCD triple chip design offers up to 60-times longer cutting life than standard carbide blades.
  • The laser cut thin kerf design gives fast and precise cuts with less dust and waste..
  • Anti-vibration design stabilizes the blade and reduces noise while cutting and Non-Stick Perma-Shield coating to reduce heat.
Check Stock

DEWALT Circular Saw Blade, 7 1/4 Inch, 4 Tooth, Cement Cutting (DWA3193PCD)

  • synthetic polycrystalline diamond tipped teeth.
  • Designed for cutting fiber cement and laminate/prefinished flooring.
Check Stock

LSHUZIYU 7-1/4\(185mm)-4PCD, Arbor 5/8\

  • Diameter 7-1/4" (185mm), 4PCD, Arbor 5/8" with diamond washer. Max Speed RPM 10000.
  • For Fiber Cement and Laminate Flooring, Very Sharp And Clear Cut.
  • 4 Polycrystalline Diamond Tipped For Longer Cutting Life, Compared Carbide-Fiber Cement Blades 60X Times Longer.
  • Laser-cut body, anti-vibration and expansion slots reduce noise and vibration during operation.
Check Stock

Drilax 2 3/4 inch Diamond Drill Bit Hole Saw Ceramic Porcelain Tiles Glass Granite Quartz 2.75 2-3/4 Single Pack

  • DIAMOND TIPPED HOLE SAW DRILL BIT 2-3/4 inch for drain holes, quartz, shower, faucet, kitchen and bathroom upgrades..
  • EASY TO USE Diamond Drill Bits. Start at an angle, go vertical, do not apply too much pressure. Keep the tool wet for cooling..
  • WORKS with STANDARD electric, cordless or upright drill presses. Shank size is 3/8 inch..
  • DRILL HOLES in glass, porcelain ceramic tiles, plant pots, fish tanks, granite, marble with diamond coated drill bit hole saw..
  • Tile installation, tiling made easy for Diamond Hole Saw Tools. Shank size is 3/8" - suitable for all standard cordless or drills..
Check Stock

BISupply Universal Jig Saw Blades Set of 5-46 Grit 4in Diamond Edge Jigsaw Blade Use as Tile Granite Ceramic Cutter

  • [For Your Masonry Needs]: BISupply 4-Inch 46 Grit T Shank Diamond Jigsaw Blade Porcelain Cutter 5-Pack is perfect for tile installers’ toolkits.
  • [Made to Last]: Hand jigsaw tool bar tile cutter is diamond-edged to help you cut tough masonry materials.
  • 46 grit of the jigsaw blade porcelain tile....
  • [Easy to Use]: Install the 1-inch (2.5cm) diamond tip jigsaw blade shaft into your jigsaw (tool not included).
  • At 4 inches (10.2cm), backsplash tile....
  • [Cut A Variety of Materials]: For straight, smooth cuts through granite, marble, porcelain, or ceramic tiles use t shank jigsaw blades.
  • [Perfect for Your Jigsaw]: Diamond tipped jigsaw blade removes materials with optimal control and designed for faster blade change.
Check Stock

BGTEC Dry Diamond Drill Bits 2pcs 1/4" with Quick Change Hex Shank for Granite Porcelain Tile Ceramic Marble

  • diameter 6mm 1/4 Inch,diamond length 10mm ,Hex Shank Quick-fit.
  • Multi-purpose drilling for granite & marble, masonry, concrete, tile/ceramic, stone.
  • Wax inside for cooling,our Diamond Tipped Drill Bits have wax cores built-in which automatically absorb and dissipate heat as you go.
  • Dry drilling and Use water for longer time.Notice:Please use with water when drilling granite.
  • Vacuum Brazed diamond technology provide very high efficiency,cuts faster and lasts longer.
Check Stock

3/4 Inch Diamond Drill Bit Ceramic Pot Porcelain Tile Glass Bottle Granite Hole Saw 0.75 inches by Drilax

  • DRILL HOLES in glass bottles, porcelain ceramic tiles, plant pots, fish tanks, granite, marble with diamond coated drill bit hole saw..
  • GREAT for making wine bottles with light strings. Can also drill through glass blocks. You can drill through bath tub tile, and put on a handle bars. Aquarium drill bit for overflow installation..
  • WORKS with STANDARD electric, cordless or upright drill presses. Shank size is 3/8 inch..
  • EASY TO USE Diamond Drill Bits. Start at an angle, go vertical, do not apply too much pressure. Keep the tool wet for cooling..
  • DIAMOND TIPPED DRILL BIT for drain holes, bottles, quartz, shower, faucet, kitchen and bathroom upgrades..
Check Stock

Superior Diamond Tools Dry Diamond Drill Bits - 3pcs 1/4'' (6mm) Quick Change Hex Shank - Diamond Hole Saw for Ceramic Porcelain Granite Marble - Tile Drill Bit - Diamond Drill Bits for Stone

  • 3pc - 1/4'' (6mm) Dry diamond drill bits with hex shank..
  • Application -- Diamond tip drill bits designed for porcelain, ceramic, granite, marble, masonry, concrete, various types of tile and stone..
  • Performance -- Vacuum brazed diamond technology provides fast, chip free holes while maintaining a long life..
  • Shank -- Quick change hex shank provides better chuck grip and fits different styles of drills..
  • Self Cooling -- Diamond tipped drill bit are integrated with wax. The wax melts while drilling absorbing and dissipating heat allowing for Dry drilling (water may be added for longer life and harder stones)..
Check Stock

10 Pack Diamond Drill Bit Set, 6mm (1/4inch) Small Diamond Hole Saw Kit for Glass, Ceramics, Porcelain, Ceramic Tile, Marble

  • HIGH QUALITY MATERIAL: The diamond drill bits are made of premium high-speed steel with nickel-plated coated body that resist corrosion. Thicken diamond coating on the tops offers the ability that each sharp bit for a few holes..
  • CLEARANCE HOLE DESIGN: Drill bits set along with side clearance hole facilitates the entrance of cooling water and escape of chips, making the drilling process easier and relaxiable..
  • WIDE APPLICATION: The diamond coated drills are perfect for drilling glass, tiles, porcelain stoneware, granite slabs, tiles. Fit for any diamond tipped drill bits of any brand..
  • TIPS: Start drill at 45 Degree to surface and align to 90 Degree as hole forms.Water is required to cool down the drill when using them..
Check Stock

1/2 inch Diamond Drill Bit Ceramic Porcelain Tile Glass Bottle Quartz Granite Countertop RO Water Filter Faucet Hole 0.50 Inch Single Pack

  • 1/2 inch Diamond Hole Saw for drilling holes in glass bottles, porcelain ceramic tiles, plant pots, fish tanks, granite, marble..
  • GREAT for making wine bottles with light strings. Can also drill through glass blocks. You can drill through bath tub tile, and put on a handle bars. Glass Bottle Decoration Lights..
  • WORKS with STANDARD drills. Shank size is 3/8 inch. No adapter needed..
  • EASY TO USE Diamond Drill Bits. Start at an angle, go vertical, do not apply too much pressure. Keep the tool wet for cooling..
  • DIAMOND TIPPED DRILL BIT for drain holes, bottles, quartz, shower, faucet, kitchen and bathroom upgrades..
Check Stock

SKIL 75740W 7-1/4-Inch 40-Tooth Carbide Tipped Circular Saw Blade for SKIL Circular Saw 5280-01/5180-01/5080-01

  • Carbide teeth can last up to 60 times longer than standard steel blades.
  • Compatible with 7-1/4" diameter circular saws 5280-01/5180-01/5080-01.
  • Included components: 7-1/4-Inch 40-Tooth Carbide Tipped Saw Blade.
  • Enjoy smooth cutting performance for framing and general-purpose cutting with the Skil 40-Tooth Carbide-Tipped Saw Blade. It comes with sharp cutting edges and induction hardened teeth for durability. This 7-1/4" circular saw blade fits most standard circular saws. It comes with a clear, anti-stick coating that helps reduce friction and binding during use. The Skil saw blade also comes with a 5/8" diamond knock-out arbor to make installation and removal easy..
Check Stock