Top Dial Comparator Stand Reviews

Taylor Pool Test Kit Replacement Comparator and R-0004 2 Oz pH Indicator Phenol

Taylor 9056 Swimming Pool Test Kit Chlorine Bromine DPD Replacement Comparator.
High range chlorine and bromine comparator.
Used with liquid DPD and offers high-range color values for chlorine and bromine.
Taylor R-0004 Swimming Pool Test Kit Reagent #4 2 Oz pH Indicator Phenol Red.
Used with water test sample to measure pH balance of your pool.

Check Stock

5PCS Vibration Sensor Module SW-420 Alarm Switch DIY Normally Closed High Sensitive Efficient Module for Arduino

Using SW-420 normally closed type vibration sensor.
Comparator output - clean signal - good strong driving waveform - ability -003e 15mA.
Display format: digital switching output (0 and 1).

Check Stock

Wireless Bicycle Speedometer and Odometer Waterproof Cycle Bike Computer with LCD Display

Features - Model: YS-368C, Color: black, Size: 4.6x4.6x2cm.
15 functions - SPD CURRENT SPEED, ODO ODOMETER, DST TRIP DISTANCE, MXS MAXIMUM SPEED, AVS AVERAGE SPEED, TM TRIP TIME.
CLK CLOCK (12H/24H), SCAN, "+" "-" COMPARATOR, MAINTENANCE ALERT, SETTING SPEED SCALE(km/h,m/hr).
SETTING TYRE CIRCUMFERENCE (0mm?9999mm), SETTING THE LAST VALUE OF ODOMETER / ODO, FREEZE FRAME MEMORY, WIRELESS.
Package includes: 1* Bicycle computer 5* Nylon cable ties 1* Magnet 1* Battery (CR2032) 1* Magnetic sensor 1* Gauge stand 1* User manual.

Check Stock

uxcell Angle Sensor Module SW-520D Ball Switch Tilt Sensor Module for Arduino

Output form: digital switch output (0 and 1).
Sensor can sense changes in body angle. A fixed bolt holes for easy installation..
Using the highly sensitive switch SW-520D as the angle sensor. Using a wide voltage LM393 comparator..
The comparator output, signal clean, good waveform, driving ability is strong, for more than 15 ma..
For purchasing electronic modules should have some basic knowledge of electronics. Most modules only provide descriptions or information. Beginners should be cautious..

Check Stock

uxcell Angle Sensor Module SW-520D Golden Ball Switch Tilt Sensor Module for Arduino 5pcs

Output form: digital switch output (0 and 1).
Sensor can sense changes in body angle. A fixed bolt holes for easy installation..
Using the highly sensitive switch SW-520D as the angle sensor. Using a wide voltage LM393 comparator..
The comparator output, signal clean, good waveform, driving ability is strong, for more than 15 ma..
For purchasing electronic modules should have some basic knowledge of electronics. Most modules only provide descriptions or information. Beginners should be cautious..

Check Stock

Bwsensing Tilt Sensor BWK228 Dual Axis Inclinometer with 0.02 Degree Resolution and 0.2 Degree Accuracy 4-20mA 0-20mA 0-24mA Analog Output for Optional

【Basic Features】: The working voltage of 3V - 5V.
Output form: digital switch output (0 and 1).
【Easy installation】: Sensor can sense changes in body angle. A fixed bolt holes for easy installation..
【High sensitivity】: Using the highly sensitive switch SW-520D as the angle sensor. Using a wide voltage LM393 comparator..
【Good overall performance】: The comparator output, signal clean, good waveform, driving ability is strong, for more than 15 ma..
【Item Condition】: The module is 100% made of original electronic components, and the product is a brand new product, you can buy it with confidence.

Check Stock

AITIAO 3Pcs GY-530 VL53L0X Laser Ranging Sensor Module GY-530 VL53L0X Time-of-Flight (ToF) Laser Distance Sensor 2.8-5V I2C IIC Interface Communication

Using the sensitive type photosensitive resistance sensor, high sensitive.
With adjustable potentiometer can adjust and detect the brightness of the light.
The output format: Digital switching output (0 and 1)..
Waveform of the comparator output signal is good,strong driving ability, for more than 5mA..
Applications: It is widely used in light intensity detected,light brightness sensors,smart car module..
Package Included:12 X Photosensitive Resistance Sensor Module.

Check Stock

YXMY2020 Benchtop Digital Resistance Tester AT2511 Digital Mega Meter with Chrome Nickel Wire Resistance for Low Digital Micro Ohm Meter for Testing Various Electronic Components

Test range from 0.01mΩ～200.0kΩ with max reading of 5000 dgts. Low test current makes it can be used in occasion of low power consumption, especially for factory checking and product sorting..
Maximum reading 5000, basic accuracy 0.2%, measuring range 0.01mΩ-200.0kΩ Maximum current: 003c100ma.
Eight-range automatic and manual test, measuring speed Fast: 10 times / sec Slow: 3 times / sec.
Display results: 0.8 inch high-definition digital tube direct reading display, full electronic switch design, can instantly complete the cut from the highest range to the lowest range, built-in comparator built-in comparator..

Check Stock

Fowler 54-580-250-0, Indi-X Blue Digital Indicator and Granite Stand

Dial Indicator: Features 1"/25mm of travel, inch or metric readings, floating zero, tolerance setting, absolute or incremental measurements and a carbide contact point for durability.
Gage Stand: The stable granite stand features 6" x 6" base with .00005" flatness, an 8" post, positive lock screws and fine adjust assembly for easy zero setting,.
Durable: The granite stand is rust resistant making it great for the shop floor..
Set Includes: Indi-X electronic 1"/25mm range indicator, granite base dial gage stand,.

Check Stock

Mitutoyo 64PKA079 Magnetic Stand With Dial Indicator 1 Travel 0.001 Graduation

Dial indicator crystal is hard coated to resist scratches.
Magnetic Stand have 132 Lbf of magnetic force to help prevent damage to indicators and probes due to accidental base fall-over..
Magnetic Stand accept all AGD-type dial indicators, test indicators and probes having .375", 6mm or 8mm diameter stems and/or lug back with 1/4" diameter mounting hole.
The On/Off switch offers instant mounting and dismounting without any adverse effect to the indicators or work surface.

Check Stock

Benchtop Digital Resistance Tester High Accuracy DC Resistance Meter Micro Ohm Meter Tester 1u-20M Ohm RS232 Handler Built-in Comparator 3.5'' TFT LCD AT516 for Testing Various Electronic Components

AT516 DC Resistance Tester is a benchtop instrument with fully automated real-time detection controlled by a high-performance ARM microprocessor..
The instrument has an accuracy of 0.05% and a measurement range of 1μΩ~20MΩ. The resistance value is displayed in 5 bits with 30000 readings and a maximum sampling speed of 7ms. The instrument has built-in temperature compensation interface to compensate for errors due to temperature..
The instrument has built-in 14-step comparator output, which can set 10 qualified files, and all the comparator results can be output through the Handler interface..
The instrument comes standard with RS-232 interface, using SCPI (Standard Command for Programmable Instrument standard command set) and Modbus protocol (Modbus has become the national standard GB/T19582-2008) applied to automatic sorting system to complete automatic pipeline test. Communicate with computer, PLC or WINCE device to efficiently perform remote control and data acquisition functions..

Check Stock

Escali AHF1 NSF Certified Stainless Steel Large Dial Refrigerator/Freezer Thermometer Silver

Temperature Range: -20° to 70°F / -30° to 20°C. Dial Diameter: 2.875 in.
Safe temperature zones and HACCP cooling & cold storage reminders indicated on the dial.

Check Stock

Taylor Classic Series Large Dial Fridge/Freezer Thermometer (4 Pack)

Extra large dial: The extra-large and colorful 3” analog dial makes it easy to read the measurements..
Made for durability: Constructed with a durable stainless steel casing for added strength and corrosion resistance..
Versatile design: thermometer can be hung from a rack or stand on its own in a fridge or freezer..
Highly accurate: ensure that food is safe with readings from -20°f to 80°f. Convenient freezer, Ref (refrigerator), and danger zones are printed on the dial for easy reference..

Check Stock