Top Degassing Flux Reviews

Orion Motor Tech 3.5cfm Vacuum Pump and Chamber Kit, 3 Gallon Vacuum Chamber with 38 Micron Vacuum Pump Epoxy Resin Kit, Vacuum Chamber with Pump for Casting Degassing

  • COMPLETE VAC CHAMBER SET: This professional degassing kit from Orion Motor Tech includes a 3.5 cfm pump, a 3 gallon chamber, a wire hose, and all the accessories needed to quickly, easily, and safely handle removing air and other gases from resin, epoxy, oil, and other solvents.
  • 3.5CFM VACUUM PUMP: This set's single-stage rotary vane pump is powered by a 0.25 hp all copper motor to keep your degassing humming along.
  • with its dual ports and included adapter, it also works with HVAC gauges and hoses to draw down car and low-tonnage AC systems to as low as 37.5 microns (5 Pa).
  • 3 GALLON CHAMBER: The vacuum chamber is constructed from brushed 201 stainless steel for superior durability and resistance to pressure, corrosion, and heat up to 248°F.
  • the transparent acrylic lid and provided gauge allow easy monitoring at every stage of the degassing process.
  • and a non-skid pad prevents noise and rattling during use.
  • HELPFUL ACCESSORIES: This vacuum pump and chamber set comes with the system's necessary lubricating and absorptive oil included, as well as a funnel and one-size-fits-most gloves for quick and clean replacement.
  • an adapter allows use of the pump with 1/4.
Check Stock

Solder Flux (56.6 grms)| flux paste | rosin solder | electrical flux paste | solder paste no clean | flux paste for soldering | rosen flux paste | solder flux electrical | flux paste for electronics

  • [Enought Quantity] : This rosin solder flux comes in 1 jar of 56 grams of soldering flux..
  • [Non Corrosive]: This non acid flux is not conductive in dry conditions and has good insulation. Is not corrosive to metal substances such as circuit boards..
  • [Oxidation Resistance] : This solder flux for electronics Anti-oxidation effect on soldering iron head of gold-copper alloy substrate. Solder flux for semi-solid, not easy to dump or waste..
  • [Strong Capability]: This rosin paste flux is suitable for welding instruments, gold, copper, tin, iron and other metals. Ideal for electronic welding, repair and rework..
Check Stock

0.9CF BVV Neocision Lab Certified Vacuum Oven V4D 4CFM 2 Stage Pump Kit

  • 3.2CF BVVâ„ Neocision Lab Certified Vacuum Oven and V9D 9CFM Two Stage Vacuum Pump Kit Disclaimer: This unit is intended for LEGAL purposes only, to be used in accordance with local laws and ordinances..
  • Use only in well-ventilated areas! INTRODUCTION Our vacuum ovens are purpose-built to perform degassing / purging of light hydrocarbon solvents. Using the technique of cold boiling, the oven applies a gentle heat under reduced pressure conditions to expedite solvent degassing while | 3.2CF BVV Neocision Lab Certified Vacuum Oven and V9D 9CFM Two Stage Pump Kit..
Check Stock

100PCS-Flux Core Welding Wire for Aluminum,Low Temperature Flux Cored Welding Rod Make Repair Aluminum Radiator,Ideal for Both Beginners And Professionals Alike,752°F(400°C) Melting Point.(13"/1.6mm)

  • Simplified welding process: Flux-cored rods have a low melting point and do not require solder powder, making them easy to use even for beginners..
  • High-quality aluminum brazing: The aluminum brazing rods come with flux already included, ensuring a durable and long-lasting bond..
  • Only for Welding Aluminum - 100Pcs(13"/1.6mm)Flux Core Welding Wire are Suitable for Welding or Surfacing Welding Aluminum, Aluminum Alloy, Aluminum-Magnesium Alloy and Other White Metals,752°F(400°C )Melting Point..
  • Flux Cored Aluminum Welding Rod Make Repair Aluminum Radiator Easily： Flux Core Welding Wire is Commonly Used for Repairing Aluminum Radiators in Automobiles, Motorcycles, Air Conditioners, and Refrigerators, Making it A Versatile Tool to Have In Your Toolbox..
Check Stock

Yescom 5 Gallon Stainless Steel Vacuum Chamber Tempered Glass Lid kit Degassing Urethanes Silicones Epoxies

  • [Precise Vacuum Chamber]: 5 Gallon vacuum chamber kit includes 1pc vacuum chamber with lid & gasket, 1pc glycerin filled gauge, 1pc silicone pad, 1pc....
  • [Easy Operation]: Glycerin filled industrial gauge for clearly displaying the operating vacuum pressure, perfect for you to monitor the whole....
  • [Durable Construction]: Made of strong stainless steel, the chamber ensures sturdiness, corrosion & rust resistance and durability.
  • [Good Sealing]: Chemical resistant silicone gasket on the edge of chamber for providing perfect sealing on degassing.
  • [Practical Accessories]: Steel wire hose for strength and durability.
  • non-slip silicone mesh pad for placing in the chamber while degassing.
Check Stock

BLUEFIRE J9802B 1/4lb Flux Cored Low Temperature Aluminium Brazing Coil All Purpose Welding Coil for Almost All Metals Soldering Propane Torch Universal Welding Rods flux Free

  • 【No Flux Needed】No additional flux is needed. BLUEFIRE brazing coil can be used directly with propane torch, which will save you a lot of money on extra flux.In addition, the coil design of brazing rods is more convenient to carry than the rod design, you can use the brazing rods coil in your pocket for repair work anywhere and whenever it's needed. A great and thoughtful design!.
  • 【Universal Magic Alloy】BLUEFIRE flux cored welding coil is mainly made of zinc aluminum alloy,which can be used for brazing copper and aluminum, aluminum and aluminum, aluminum and stainless steel, aluminum and steel, etc.More specificly,BLUEFIRE flux cored welding coil can be used for brazing transformer,reactor,condenser, evaporator, radiator,motor, battery or other household appliances.You can use it to complete most of the brazing work in life..
  • 【Easy to Melt and Flow】BLUEFIRE flux cored brazing rods coil can melt at 752°F and have very good fluidity with good capillary attraction.In addition, BLUEFIRE flux cored welding wire is not only corrosion-resistant, but also is post-braze cleaning unnecessary. It's characteristics of high thermal conductivity and high conductivity make the welding effect full and smooth.It fits both professionals and amateurs..
Check Stock

10 Pieces No Clean Soldering Flux Pen and Solder Remover Wick, 0.1 Inch Wide and 59 Inch Long, Solder Braid Wick Liquid Solder Flux Pen for Electronics Welding Repair Tabbing Wire Maintenance

  • Nice combination: you will get 5 no clean soldering flux pens and 5 solder remover wick sets, 10 in total, sufficient quantity, thoughtful combination, to meet daily use and replacement needs.
  • Appropriate size: the no-clean solder wick is about 1.5 m/ 59 inches long and 2.5 mm/ 0.1 inches wide, and liquid flux brush flux pen is about 15 x 1.5 cm/ 6 x 0.6 inch, convenient to hold.
  • Please check the size carefully before purchasing.
  • Multiple reliable materials: these no-clean braided soldering wicks are made of quality copper wire, using nice weaving technology, which can enhance surface tension and absorb excess solder.
  • And flux remover pen adopts quality material, non-leakage, flux safe and prevents you from being exposed to organic solvents.
  • Practical tools: soft brush tip flux pen releases a moderate stream of liquid to clean components without spoiling the PCB copper foil or IC pins.
  • Solder remover has good thermal conductivity and absorption, helping to reduce the risk of thermal spoiling to the board.
  • Broad utilization: these flux pens and braided solder wicks can be applied in laboratories, computers, home repairs and to correct small PCB errors and through-hole joints, electronic soldering and much more, bringing a lot of convenience and effic....
Check Stock

5 Pieces No Clean Solder Flux Pen 5.6 Inch Length for Electronics Tabbing Wire Soldering Welding Repair

  • What can you get: the package includes 5 pieces of no clean solder flux pens, enough quantity providing you a wide choice for daily life use and replace.
  • Proper size: the soldering no clean flux pen measure approx. 14.3 cm/ 5.6 inches in length, please check the size carefully before purchasing.
  • Reliable and quality material: the liquid soldering pen is made of reliable materials and no leak and safe design for protecting the flux, keep you from touching the organic solvents.
  • Wide applications: these flux pens can be applied for laboratory, computer, telecommunications, home repairs, bringing a lot of convenience to your work.
  • Simple operation: you only need to press the pen tip 1-2 times to release the liquid, and after use, the flux pen can be cleaned with alcohol.
Check Stock

Goflas 160A MIG Welder, 110/220V Flux Core Welder MIG/Lift TIG/Stick 3 in 1 Welding Machine with IGBT Inverter Gasless Welder with Welding Gun, Electrode Holder, Earth Clamp and 2lb Welding Wire

  • 【Multifunctions】3 in 1 Welder Machine Suitable for Gasless Flux Wire MIG Welder, Stick Welder and Lift TIG Welder. (Need to buy extra Lift tig torch).
  • 【IGBT inverter technology】160A Welding Machine adopts advanced IGBT inverter technology, which improves the reliability of the welder. Powerful arc force makes welding more stable, efficient, convenient, deeper penetration, constant welding current to keep the arc stable, especially in low current welding..
  • 【Gasless Flux-cored Welding Machine】160A Flux core Welder is a versatile flux core arc welder, specifically designed to use self-shielding flux-cored welding wire.This eliminates the need for gas and regulators that normal MIG welders require..
  • 【Synergic Control】Through a knob to adjust the welding current, other welding parameters (wire feeding speed, welding voltage, inductance value, etc.) automatically matched with it. It has the feature of easy adjustment. It is suitable for both professional welders and novices..
  • 【Package includes】: 1* 160A MIG Welder, 1* MIG Torch, 1*Electrode Clamp, 1* Earth Holder, 1* .030"/2lb Flux Cored Wire, 1* 0.8MM/.030" Contact Tips, 1* 0.9MM/.035" Contact Tips, 1* Brush&Hammer, 1* User Manual..
Check Stock

TOOLIOM Aluminum MIG Welder 250A 110V/220V Dual Voltage MIG/Lift TIG/Stick 3 in 1 Welding Machine

  • Multi-functions in one machine, suitable for Gas MIG/Flux MIG/Stick/ Lift TIG..
  • Can weld aluminum ,compatible with a spool gun or MIG torch with graphite wire feed tube..
  • MIG synergistic setting & MIG manual setting, good choice for both novice and professional..
  • Can be used with various welding wire, .040" solid/flux/aluminum wire,035" solid/flux wire,030"solid/flux wire,024" solid wire..
  • Dual voltage input design: Welding machine can be plugged into 110/220V dual voltage (Automatic fitting)..
Check Stock

Mold Star 15 SLOW - 1A:1B Mix By Volume Platinum Silicone Rubber - Pint Unit

  • Tear Resistant - Mold Star silicones cure to soft, strong rubbers which are tear resistant and exhibit very low long term shrinkage *Packaging may vary*.
  • Heat Resistant - Cured Mold Star rubber is heat resistant up to 450°F (232°C) and is suitable for casting low-temperature melt metal alloys.
  • Curing - Allow Mold Star 15 SLOW silicone rubber to cure for 4 hours at room temperature (73°F/23°C) before demolding..
  • Vacuum Degassing - Although not necessary, vacuum degassing helps eliminate any entrapped air in pourable silicone rubber.
  • Mold Performance - The physical life of the mold depends on how you use it (materials cast, frequency, etc.). Casting abrasive materials such as concrete can quickly erode mold detail, while casting non-abrasive materials (wax) will not affect mold detail. Before storing, the mold should be cleaned with a soap solution and wiped fully dry. Two part (or more) molds should be assembled. Molds should be stored on a level surface in a cool, dry environment.
Check Stock

Weller D650PK Industrial Soldering Gun Kit & Soldering Accessory Kit

  • Leading manufacturer of high-quality tools.
  • Made to withstand even the most demanding jobs.
  • International renown for our diverse range of products.
  • 5 Piece Accessory Kit: Kit includes - 1 oz. of rosin flux paste, Lead Free Solder SN99.25Cu 0.75 dia. 0.8mm (0.031”) x 12.2g (0.43oz), 1 flux brush and 1 brass wire cleaner with silicone holder to ensure effective soldering joints and extend life of soldering tip.
  • Improve Solder Joints: Apply lead free and RoHS compliant rosin flux paste with flux brush to improve wetting and flow of solder for easier soldering and improved solder joints.
  • Dry Tip Cleaning: Maintain tip cleaning and effectively remove residual solder from your soldering tools without damaging your tips with Weller's Soldering Brass Tip Cleaner with Silicone Holder.
Check Stock

Canfield 50/50 solder for stained glass 1 Lb Spool

  • Non-corrosive non-conductive flux residue.
  • Melting point: 183 °c - 191 °c/ 361 °f - 376 °f.
Check Stock