Top Dc Clamp Meter For Automotive Reviews

Switches Be Trippin Funny Master Electrician Fuse Box T-Shirt

  • The 117 multimeter measures AC and DC voltage as well as AC and DC amps. The 323 clamp meter measures AC and DC voltage as well as AC amps.
  • The 117 multimeter features true RMS for accurate measurements on non-linear loads.
  • The 117 multimeter features low input impedance which helps prevent false readings due to ghost voltage.
  • The 323 clamp meter provides a true RMS AC voltage and current for accurate measurements on non linear signals.
  • The 323 clamp meter measures 400 A AC current and 600 VAC and DC voltage.
Check Stock

BTMETER BT-7200APP TRMS 6000 Counts Clamp Multimeter, Digital Clamp-on Ammeter for AC/DC Current Voltage Resistance Capacitor Frequency Continuity Temperature NCV Meter

  • ⚡【Monitoring on Your Phone】Smart clamp-on multi tester BT-7200APP can auto connect to your Android / Apple phones or tablet with ease, allows you viewing logging the data out of the arc flash zone 15m (50 ft) away, and save the measurement for detailed analysis, sharing later..
  • ⚡【AC DC Clamp Amp Voltmeter w/ NCV】This clamp multitester can accurately measure AC/DC Amperage, AC/DC Voltage, Resistance, Frequency or Duty Cycle, Capacitance and also provides Noncontact AC Voltage(NCV) detection, Diode, Continuity Buzzer and Temperature(℃/℉) tests. Easy to use in non-contact ampere measures, troubleshoot electrical problems in , motors, household appliances, HVAC.
  • ⚡【Continuous Data Logging Clamp DMM】This clamp-on meter can displays AC DC amps, volts, ohms, Cap, Hz Temp in Max/Min on the same interface with real-time reading. The curve graph w/ timing will show you the changes of amp volt flow more visually. Also supports adjustable data logging rates for continuous testing/ recording unless the battery is dead or the memory is full..
  • ⚡【Reliable True RMS Voltage Amperage Meter】0.1 amp resolution for 0.1....
Check Stock

Digital Clamp Meter Bluetooth Clamp Multimeter ac dc amp Meter AP-7200APP Auto-ranging 6000 Counts Amp Meter Voltage Tester Measures Amperage, Volt, Capacitance, Continuity, Ohm Clamp-on Ammeter

  • ✅【Multifunction Clamp Meter】 6000 Counts Auto-range AC/DC amps clamp multimeter with the DC Voltage range:600mV~600V, AC Voltage range:6V~600V, AC/DC Current: 60A~400A.
  • Ideal Non-contact ampere multimeter to troubleshoot electrical problems in automotive, household, HVAC, vehicle boat motor diagnosis..
  • ✅【Bluetooth Amp Meter】 This clamp meter can be connected with mobile phone by Bluetooth, Auto pair with Android / IOS phone via bluetooth nearby, It's easy to install, just scan the QR code or search “AiLink” in Google play or APP Store, so you can measure data and analyze it by mobile phone APP. NOTE: The mobile phone APP can be installed in iphone 4S IOS 7.0 or android 4.30 system and up.the MAX distance: 10～15m..
  • ✅【NCV Detection Function】Non-contact voltage detection effectively check electrical status through measuring EM field intensity without touching any wires.
  • The NCV button lies on the left side of the rotary switch. Simply place your thumb on it and push.
  • When the live voltage ≥ 90V AC rms, the lamp light will light up together with sound..
Check Stock

Milwaukee 2235-20 400 Amp Clamp Meter

  • 400A MAX AC/DC CURRENT RANGE: Reads both AC and DC current. With 9 functions it’s the perfect meter for the professional electrician.
  • MORE ACCURATE: Equipped with true RMS accuracy this clamp meter won’t leave you guessing weather your readings are correct.
  • HIGH SAFETY RATING: Feel safe on the job knowing Southwire’s clamp meter is CAT III 600V safety rated.
  • BUILT-IN NON-CONTACT VOLTAGE DETECTOR: Helps identify where live voltage may be present before working on electrical installations or troubleshooting.
  • CONVENIENT THIRD-HAND TEST PROBE HOLDER: The clip on the back of the clamp meter allows you to hold a test lead in one hand and the meter and the other test lead in your other hand making the testing process easier.
  • BUILT IN WORK LIGHT: The built-in work light is an extra convenience feature that allows visibility even in dimly lit areas.
  • WHAT’S INCLUDED: Carrying case, clamp meter, test leads, type K temperature probe with banana plug adapter, AAA batteries and instruction manual.
Check Stock

Automotive Electrical and Electronics Systems and Components: Testing and Repairs: Use of multimeter for Automotive Electrical Diagnostics

  • The 117 multimeter measures AC and DC voltage as well as AC and DC amps. The 323 clamp meter measures AC and DC voltage as well as AC amps.
  • The 117 multimeter features true RMS for accurate measurements on non-linear loads.
  • The 117 multimeter features low input impedance which helps prevent false readings due to ghost voltage.
  • The 323 clamp meter provides a true RMS AC voltage and current for accurate measurements on non linear signals.
  • The 323 clamp meter measures 400 A AC current and 600 VAC and DC voltage.
Check Stock

AstroAI TRMS 6000 Counts Multimeter with Large Backlit Display + 4000 Counts Auto-ranging Digital Clamp Meter

  • Multifunctional - Accurately measures AC/DC Current, AC/DC Voltage, Continuity, Resistance, Capacitance, Frequency and Diode.
  • Easy to read - The LCD Backlit Screen make it easy to use in a dark working area. It is often easier to use the data hold function to freeze the data being displayed on the digital display..
  • Suitable For Many Occasions - This Multimeter is a golden partner to help to troubleshoot a variety of automotive and household electrical problems safely and accurately..
  • Non-contact Voltage Testing - This Clamp Meter features non-contact voltage testing with sound and light alarms. When the Meter senses a weak AC signal, the green indicator light will come on and the buzzer will emit a slow, audible beep. when the Meter senses a strong AC signal, the red indicator light will come on and the buzzer will emit a brief beep.
  • Ensure Safety - Double ceramic fuse is anti-burn and protects from overloading，and it will be more secure and reliable.
Check Stock

Power Supply AC Adapter OEM Replacement for Xbox One S Slim Model NP15-120P1A PA-1131-13MX

  • The 117 multimeter measures AC and DC voltage as well as AC and DC amps. The 323 clamp meter measures AC and DC voltage as well as AC amps.
  • The 117 multimeter features true RMS for accurate measurements on non-linear loads.
  • The 117 multimeter features low input impedance which helps prevent false readings due to ghost voltage.
  • The 323 clamp meter provides a true RMS AC voltage and current for accurate measurements on non linear signals.
  • The 323 clamp meter measures 400 A AC current and 600 VAC and DC voltage.
Check Stock

Fluke 773 Advanced Milliamp Process Clamp-Meter

  • Digital clamp-meter for 24V loop circuits measures DC to 100mA via clamp and to 24mA in circuit, and DC voltage to 30V.
  • Meter can source and simulate DC signals from 4 to 20mA, can source DC voltage signals up to 10V, and is accurate to 0.2% with a resolution of 0.01mA.
  • Clamp with 4.5mm (0.177 inches) jaw opening measures current without touching or interrupting the circuit, and is for use in hard-to-reach applications.
  • Built-in 24V loop power supply to power a transmitter and measure its milliamp output signal.
  • Meets EN and IEC safety standards 61010-1 and 61010-2-032.
Check Stock

OWON Current Clamp Meter Multimeter CP-05+ Clamp Current Probe 200KHz 400A for Oscilloscope 4A 40A 200A 200-400A Test Range with BNC Connector

  • ...l, switch the current clamp on (power LED should light) and then clamp the jaws around the current carrying conductor as shown. Typical Uses The AC/DC Current Probe simply offers the best value for money without compromising resolution..
  • ¡¾Multiple Test Ranges¡¿The OWON CP-05+ current clamp is ideal for use with automotive oscilloscopes for measuring currents between 1 mA and 400 A. Various current test range, 4A, 40A, 200A, 200-400A test range are available.Low noise level, and high detection accuracy..
  • ¡¾Easy to Use¡¿The current clamp has range selection settings, set by a slider switch on the handle of the probe. In use there is no need to break into the circuit or disturb the isolation as the opening jaws simply clamp around the current carrying conductor. No electrical contact is required. These current clamps have been designed for use with oscilloscopes..
  • ¡¾Portable¡¿Special value kit for electrical professional who is looking to add on DC and AC current measurement capabilities to their DMM. Includes a roomy carry case to hold and protect your meter and current clamp, plus extra storage for your AC/DC Current Probe. Auto zero at power on, relative zero correction .Low noise level, and high detection accuracy. 100% money back guarante....
Check Stock

CAMWAY Portable Clamp Meter Digital 6000 Counts AC/DC Current TRMS AMP OHM Tester Capacitance Multimeter with Alligator Clips

  • 【Auto/Manual Ranging & NCV】 The 6000counts Meter Automatically Select Appropriate Decimal Point Place.
  • NCV Detects Existence of AC voltage on....
  • 【Clamp Measuring】 Clamp Jaw up to 28mm, Clamp Meter Measures AC Current without Interrupting Circuit, Makes it Much Safer to Use on Mains Cables....
  • 【True RMS Multi-purpose Clamp Meter】 AC/DC Current, Accurate AC/DC Voltage , Frequency, Duty Cycle, Diode, Temperature Test,Capacitance and....
  • 【Continuity Test & Overload Protection Display】 Low Voltage Indication & Overload Protection Designed , Safely Accurately Confirm the Circuit....
  • 【Convenient to Use】 Meter size 210×110×45mm Portable . High Resolution , Low Battery Display. Large Backlit LCD Screen Improves Visibility.....
Check Stock

Wireless Bluetooth Clamp Meter, INFURIDER YF-7200APP 6000 Counts Auto-Ranging Digital Voltmeter Ammeter Measures DC AC Volt Amp Ohm Clamp on Multimeter with Capacitance,Temp,Diode Tester

  • 【True RMS Clamp Meter】This ac dc clamp multimeter can accurately measure AC/DC Voltage,AC/DC current(60A/400A) has resolution up to 0.01A.Also can provide resistance,capacitance,temperature,diode,continuity,frequency(Hz) and duty cycle measurement..
  • 【Bluetooth Voltmeter Ammeter】YF-7200APP clamp meter can be easily and automatically connected to your Android/IOS.Convenient viewing of voltage amperage ohm readings on a smartphone or tablet via AiLink app(within 15m).Moreover, you can download files or charts to monitor,log and analyze..
  • 【Easy to Use】Press the [HOLD] button over 2 seconds to turn on LCD backlight screen and brightness flashlight.It’s possible to read and record the value easily in darkness.The volt amp meter feature with data hold,low battery indication.Compact and portable design make the amperage meter easy to carry and use..
  • 【NCV Function】Our clamp on multimeter with non contact voltage function,can detection effectively check electrical status through measuring without touching any wires.Light and sound alarm if detects AC voltage 90-1000V or live wire.Easy to use for troubleshooting your....
Check Stock

INGCO Auto Ranging Digital Clamp Meter TRMS 6000 Counts Measures AC/DC Voltage to 600V AC/DC Current to 600A Resistance Capacitance Diode Test Temperature Multimeter

  • WIDE RANGE OF TESTS. INGCO TRMS auto ranging clamp meter meets your different needs for measuring, including AC/DC voltage, AC/DC current, resistance,....
  • EASY TO USE. The backlight changes to orange when volt > 80V or current > 3A with dual readings.
  • Flashing light helps place the probes to correct....
  • PROFESSIONAL MULTIMETER. Automatic range turntable design and NCV non-contact measurement. The low pass filter (LPF) ensures accurate drive output....
  • ALL ON ONE DEVICE. 100mF large capacity. INGCO clamp meter can be used as clamp meter as well as capacitance meter. 100mF equals 100000μF. It's....
  • WORRY-FREE ORDER. If you are not 100% satisfied with our clamp meter, we offer you 90 days refund or replacement. If you have any problem, please....
Check Stock

Southwire CLAMP Meter MAINTPRO 23030T

  • PROFESSIONAL DEVICE: The Southwire MaintenancePRO 23030T clamp meter is a rugged high end AC and AC/DC 1000A clamp meter for the serious electrician..
  • FUNCTIONALITY: The MaintenancePRO 23030T Clamp meter has 10 Measuring functions along with a powerful LED work light..
  • ENHANCED FEATURES: Added features like an easy to read 6,000 count backlit display and a built in non-contact AC voltage detector makes the 23030T the....
  • SAFETY AND INDUSTRY APPROVAL: With a UL listed safety rating of CAT IV 600V/CAT III 1000V, these clamp meters are built to get the tough jobs done..
  • WHAT’S IN THE BOX: MaintenancePRO 23030T Clamp meter, Test leads, Type K temperature probe with banana plug adapter, Carrying case and a 9 volt....
Check Stock