Top Dc 4 2v 1 A Reviews

6 Pack Mini L298N DC Motor Driver, MELIFE MX1508 Mini Dual Channel 1.5A 1.5A 2 Way PWM Speed Controller Dual H-Bridge Replace Stepper

  • Motor drive module is ideal for use in battery-powered smart car, toy cars, robots..
  • Dual H-bridge motor driver, can drive two DC motors or a 4-wire two-phase stepper motor..
  • Supply voltage 2V -- 10V, can drive two DC motors or a 4-wire 2-phase stepper motors ,can achieve forward rotation or reverse rotation, it is possible to adjust the rotation speed..
  • Dual 1.5A * 2, the peak current to be 2.5A, built-in thermal protection circuit, do not be afraid motor stall burned, automatic recovery after the temperature dropped..
  • Use of imported original chip, built-in low on-resistance MOS switch, minimal heat, no heat sink, small size, low power consumption, is ideal for battery powered..
Check Stock

(Taelectric) AC/DC Wall Battery Charger Power Adapter for LG BL-53YH G3 VS985 F400 D850

  • 2 IN 1 USB Battery Charger. It can be used as not only a special charger, but also a charging plug for your device. Automatic constant current control prevents battery from overcharging. Smart LED indicator shows charging status: Pink/Purple shows that it is charging. Blue shows that it is charged fully. When the battery is fully charged,automatically stop charging..
  • Safety cut out circuit,Built-in protection circuit prevents overcharging. Constant current,constant voltage charging,automatic identification. Also convenient to interchange your spare batteries Use the data line which corresponds to mobile phone can be charged directly to the phone. Intelligent Chip: The smart chip protects from short circuit and overload by regulating voltage an ensuring a high effeciency charge. ..
  • Input: AC 100-240V 50/60Hz 150mA Output: DC 4.35V 600mA +/-50mA,USB Port Output: DC5.2V, 1000mA(USB) Connecter: US Plug Short circuit and overload protection Color: Black.
Check Stock

WJSKDQ Universal 12V Car Automatic Antenna Kit Signal Amplifier Retractable Car Radio Antenna Accessories

  • 1 retch length: 39”, protective bottom plate: 12”, wire length: 47”, cable: 75 ohms cables..
  • 2 Built-in superior quality micro relays, 3C-2V coaxial cable.Long life time--the service life of more than 50,000 times greater than the top edge 4KG..
  • 3 Fully Automatic when you connect it to the power cable.Signal receive--Stainless steel mast..
  • 4A good acceptable performance electric retractable Signal Amplifier Retractable. waterproof performance, low noise.
  • 5 Material:stainless steel； voltage range: DC10-14V,Current: 0.7±0.2A；working voltage : DC12V.
Check Stock

DCDC Converter, DROK Step Down Voltage Regulator Module DC 4.5-40V 36V 24V to 1.25-37V 12V 9V 5V 3V Variable Buck Converter Adjustable Electronic Power Supply Volt Reduce Transformer Stabilizer Board

  • DROK DCDC converter input voltage range is DC 4.5-40v, output voltage range is DC 1.25-37v, the voltage is continuously adjustable. It is a non-isolated buck converter, can dial down voltage from 36v 30v 24v to 12v 5v 3.7v 3.5v 3.3v 2v..
  • Analog Control: Our DC buck converter is designed with a adjustable potentiometer, the output voltage can be easily and accurately adjusted with a mini screwdriver. Clockwise to step up voltage and counterclockwise to step down voltage..
  • Protection: This power supply supply step down regulator is with over-temperature and short-circuit protection, which protect your device from damaging and enhance its safety when using..
  • Low Power-consumption: Although the voltage range is wide, this buck voltage module has a low power consumption of only about 3A when in static state..
  • Note: Please make sure the input voltage is at least 1.5V greater than output voltage to ensure stable output.
  • please note that there is no reversed connection protection, so check the polarity of input voltage before power on to avoid burning due to reversed connection.
  • please add heatsink when the output power is larger than 15W..
Check Stock

iPort LaunchPort AM.2 Sleeve for iPad Mini 1, 2, 3 & 4 - White

  • Allows you to dock and charge iPad on a wall or table using magnets and wireless charging (docking stations sold separately).
  • Audio wave-guides enhance media experience from iPad.
  • Available in soft-touch black or high-gloss White finishes.
  • Power: 15V DC input, 5. 2V 2. 4a DC output, Apple Lightning Connector.
Check Stock

Rockville PC Gaming Streaming Twitch Bundle w/RCM03 Microphone+Headphones+Tripod

  • Rockville RCM03 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount. Aluminum high quality construction. Polar Pattern: Internally Polarized Condenser Cardioid Design. Large diaphragm for smooth, natural sound and low noise. Power Requirements: 48V DC Phantom Power. Uni-directional.
  • Sensitivity: -27dB±2dB(0dB=1V/Pa at1kHZ). Output impedance: 200Ω±30%(at 1kHz). Standard operating voltage: 3V. Operating voltage range: 1.5V-10V. Current consumption: less than 500uA.
  • Voltage deduction characteristic: within 3dB at 2V. S/N ratio: More than 24dB. Frequency Response: 30Hz - 20 KHz. Fixed Crossover Filter cutoff frequency: 40Hz---16 KHz. Load impedance: Greater or = to 1000 Ohms.
  • Equivalent Noise level: Less than 18dB A (IEC581-5). Max. Input SPL: 126dB(THD≤1.0% at 1kHZ). Electrical current: Greater than 4.8Ma. Microphone body net weight:320 Grams (0.7 Pounds). Microphone Max.diameter 44mm (1.73” inches).
  • Microphone Length 217mm (8.54” inches). Microphone material: steel grille + Alluminum (handheld part). PCB Layout: Surface mount.
Check Stock

81260-2V000 Hatch Button Trunk Latch for Hyundai Veloster 1.6L 2012 2013 2014 2015 2016 2017 Rear Trunk Hatch Release Switch Button - Replace 812602V000 Outside HDL Lock Assembly-T Lid Without Camera

  • REPLACEMENT OUTSIDE HDL LOCK ASSEMBLY T/LID - 81260-2V000 rear hatch release button helps to open the rear hatch at ease. Constructed of premium material for long lasting durability and reliability..
  • FITS THE FOLLOWING VEHICLES - For 2012 Hyundai Veloster Hatch Release Button.
  • 2013 Hyundai Veloster Hatch Release Button.
  • 2014 Hyundai Veloster Hatch Release Button.
  • 2015 Hyundai Veloster Hatch Release Button.
  • 2016 Hyundai Veloster Hatch Release Button.
  • 2017 Hyundai Veloster Hatch Release Button with 1.6 Liter L4 Engine Gas. Please kindly check the fitment and part number before ordering, Thanks!.
  • 812602V000, hyundai part no. 81260-2v000, h 812602v000, # h 81260 2v010, trunk release switch 81260 2v000, 81260-2v000 veloster | Direct replacement for a proper fit and easy installation, quality materials used, meets or exceeds OEM standards, 100% rigorously tested..
  • OEM DESIGN, DIRECT FIT - The swap is super easy for a non professional. Even though this is not a genuine Hyundai original equipment outside hdl & lock assy-T/Lid, but it works even better and lasts longer at a much lower price. Save time and hundreds of dollars by replacing veloster rear trunk release switch latch assembly by yourself :).
Check Stock

EEEEE16 Value 250 pcs Diode Assortment Kit Contains Rectifier Fast Recovery Schottky Switching Zener Diode Pack of Assorted diodes

  • SMD 0.5 Watt Zener Diodes Assortment Set (Pack of 34 Values, Each 10 Pieces, Total 340 Pieces).
  • Lead-Free / RoHS Compliant Electronics Component / LL-34 Surface Mount.
  • See Picture 4-7 for Specifications Datasheet.
  • ZMM2V0 ZMM2V2 ZMM2V4 ZMM2V7 ZMM3V0 ZMM3V3 ZMM3V6 ZMM3V9 ZMM4V3 ZMM4V7 ZMM5V1 ZMM5V6 ZMM6V2 ZMM6V8 ZMM7V5 ZMM8V2 ZMM9V1 ZMM10V ZMM11V ZMM12V ZMM13V ZMM15V ZMM16V ZMM18V ZMM20V ZMM22V ZMM24V ZMM27V ZMM30V ZMM33V ZMM36V ZMM39 ZMM43 ZMM47.
  • Zener Voltage: 2 / 2.2 / 2.4 / 2.7 / 3 / 3.3 / 3.6 / 3.9 / 4.3 / 4.7 / 5.1 / 5.6 / 6.2 / 6.8 / 7.5 / 8.2 / 9.1 / 10 / 11 / 12 / 13 / 15 / 16 / 18 / 20 / 22 / 24 / 27 / 30 / 33 / 36 / 39 / 43 / 47 Volts.
Check Stock

VKLSVAN 10PCS MT3608 Step Up Boost Converter DC-DC 2V-24V to 5V-28V Adjustable Step Up Voltage Regulator Module 5V 9V 12V 24V

  • Product Size: 36 x 17 x 14 mm/1.44 x 0.68 x 0.56 in(L*W*H).
  • With this mini step-up converter, you can easily DIY an output adjustable power supply, like 9V, 12V, 15V, 18V, 24V etc..
  • Note: If the output voltage cannot be adjusted and always equal to the input voltage, please turn the potentiometer counterclockwise for more than 10 turns firstly..
Check Stock

Hatch Button Trunk Latch 81260-2V010 Compatible with Hyundai Veloster 1.6L 2012 2013 2014 2015 2016 2017 Rear Trunk Hatch Release Switch Buttons Outside HDL Lock Assembly-T Lid with Camera

  • 2013 Hyundai Veloster Hatch Release Button.
  • 2014 Hyundai Veloster Hatch Release Button.
  • 2015 Hyundai Veloster Hatch Release Button.
  • 2016 Hyundai Veloster Hatch Release Button.
  • 2017 Hyundai Veloster Hatch Release Button with 1.6 Liter L4 Engine Gas..
  • Manufacturer Part Number: 81260-2V010, 812602V010, h 81260 2v010, h 81260-2v010, 81260-2v010 outside hdl lock assembly, handle and lock assembly 81260-2v010, 81260-2v010 hatch button, hyundai velosyer 81260 2v010 | Direct replacement for a proper fit and easy installation, quality materials used, meets or exceeds OEM standards, 100% rigorously tested..
  • Installation: Tailgate rear hatch handle release button switch sensor made of high quality materials, which will built to long lasting durability, performance and prevent water and corrosion. The and rear tailgate lock release button installation is super easy and direct fitment and perfect replacement, no modification, cutting, or drilling required, meets or exceeds OEM standards..
  • Function: Replace HDL lock T lid tailgate rear hatch handle release button switch sensor will fix your broken or damaged trunk latch lock, the tailgate latch lock makes the trunk work smoothly.
  • Notice: Please properly verify the Year/Make/Model be....
Check Stock

10 Pieces DC-DC Boost Converter 2A Adjustable Module Voltage Regulator Board Input Voltage 2 Volt-24 Volt to 5 Volt-28 Volt Output Voltage (Without USB Connector)

  • Product size: 36 x 17 x 14 mm/ 1.42 x 0.67 x 0.55 inch (L x W x H).
  • Method of use: the module of the IN+ and - after 2-24V, IN adjusting the potentiometer can adjust output voltage, output voltage is greater than the input voltage.
  • Matters needing attention: 1. The input voltage should not exceed the maximum input voltage.
  • 2. The peak current output current is no more than TV university.
  • Package included: 10 x DC-DC power apply module booster power module, max output is 28Volt.
Check Stock

WMYCONGCONG 70 PCS Mixed Color 12V DC 5mm LED Pre Wired 20cm Bulb Lamp w/ 20 PCS 5mm Light Emitting Diode LED Holder w/ 10 PCS 9V Battery Clip Connector

  • Pre-wired with built in resistor, soldered well and heatshrinked, ideal for hobbyists, RC car, boat, custom builds, DIY Car Boat Toys Parties and multiply lighting projects etc..
  • 5mm metal LED holders, secure to hold LED firmly.
  • 9V wired battery clip connector, great replacement for a broken battery connector on your electronic device..
  • Color: red, green, white, yellow, blue, quick flashing and slow falshing..
  • Operational voltage range: DC 2v-12v. 2v very dim, 12v very bright..
  • Package Content: 70pcs 5mm LED pre wired light(10pcs each color) + 20 pcs 5mm LED Lamp Holder + 10 pcs Battery Clip Connector..
Check Stock

BLAUPUNKT BL205 Car Power Window Kit, 2-Door, 12 Volt Universal

  • Converts any crank-style window in a power window.
  • Motor enclosed in metal housing to ensure quiet operation.
Check Stock